Sectional loading bay doors in Surrey

In short

A sectional loading bay door is an overhead door made from horizontal insulated steel panels hinged together, which run up on rollers in side tracks and park beneath the ceiling or up the wall when open. Panels are commonly 40 to 80 mm thick, so the door seals and insulates better than a single-skin shutter, and it can be operated by hand chain, push-up or electric motor.

Is this right for your site in Surrey?

Warehouses across Surrey that still rely on single-skin shutters may switch to insulated sectional doors when heating costs or cold goods-in areas become a problem. Food and drink businesses in Surrey running temperature-controlled goods-in areas can choose thicker panels to hold conditions steady between deliveries.

If you are fitting out a new warehouse in Surrey, specifying insulated sectional doors from the start avoids disruptive changes once the building is occupied.

Our part of the job in Surrey is to survey, quote and manage; the fitting itself is done by specialist installation engineers working under our management. The survey and the written quote are free. Once the fixed price is accepted, we agree dates that work around your deliveries and shifts, including out-of-hours working where needed. Every installation is tested before handover, and you receive the documentation for each item fitted.

What happens on site when a sectional dock door is installed?

Fitting a sectional dock door often takes around a day per opening once the door is on site, though very large doors or awkward fixings take longer. The bay is out of use while the work is under way.

A typical installation runs like this:

The old door, if there is one, is taken down and removed from site.
Steel angles or packers are fixed to the opening so the tracks run true.
Tracks, springs and panels are assembled and the door is balanced.
The operator, safety edge, photocells and controls are fitted and wired.
The door is tested, adjusted and handed over.

Before we arrive you will need a clear area inside the opening for access equipment and the bay taken out of service. Electric doors also need a suitable isolated power supply near the door head, single or three-phase depending on the operator, which we confirm in the quote. On multi-door sites we work bay by bay so the rest of the dock keeps running.

How much does a sectional loading bay door cost?

A sectional loading bay door typically costs £2,400 to £5,200 per door, excluding VAT, supply and fit, for a made-to-measure insulated door fitted and working.

Where your door lands in the range depends on:

Opening size: larger doors need more panel area, heavier springs and longer track.
Panel thickness and finish: thicker insulated panels and non-standard colours add cost.
Track type: high-lift and vertical lift tracks use more steel and fixings than standard lift.
Operation: an electric operator with safety edge and photocells costs more than chain or push-up operation.
Vision panels and extras: glazed sections, interlocks to the leveller and links to traffic lights.
Site conditions: removing an old door, making good the opening, getting power to the door head and out-of-hours working.

We price after a free site survey, and the written quote is the fixed price for the work described. You can compare typical figures on our price guide.

Towns we cover in Surrey

Below is a list of towns in Surrey for sectional loading bay doors. Each page explains our approach for sites in that town.

Guide price

£2,400–£5,200 per door, ex VAT

Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.

Regulations and approvals in England

Sites in Surrey fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.

Questions

Can you work alongside our main contractor on a new build in Surrey?

Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.

How do you price sectional loading bay doors for a site in Surrey?

Guide budgets for supply and fit are £2,400 to £5,200 per door, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.

Can the door be supplied in our company colours?

Yes, panels come in a range of standard colours, and many manufacturers can supply other shades at extra cost and with a longer lead time. The inside face is usually white or light grey. We confirm the colour, finish and lead time in the written quote.

How is a sectional loading bay door locked?

A manual sectional door is usually locked with a slide bolt or shoot bolt on the inside, while an electric door is held closed by its operator. Because dock doors are secured from inside the building, extra locks are not often needed, but we can add bolts or a locking operator where security is a priority.

Other services in Surrey

Full guide to sectional loading bay doors · All loading bay services in Surrey