Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Lifts and loading houses · Gosforth

Loading houses in Gosforth

For operators in Gosforth thinking about loading houses, the starting point is a conversation about the site, the vehicles you load and how the bay is used day to day.

Guide £14,500–£32,000 per house ex VATFree site surveyNE3
Book a free survey0800 088 6248
Location
Gosforth, Tyne and Wear
Main postcode district
NE3
Nearby (straight line)
Newcastle upon Tyne (2 miles), Gateshead (3 miles) and Wallsend (3 miles)
Survey and quote
Free, with a fixed written quote
Loading houses, in short

A loading house is an insulated steel structure built against the outside wall of a building, containing a dock leveller and usually a shelter or seal at its front. The building door closes at the wall line, while trailers dock against the house. Loading houses suit buildings whose floor is at dock height but which have no room inside for a leveller pit.

What matters for loading houses in Gosforth?

Units in Gosforth with floors at dock height but no room for an internal leveller pit are typical candidates for an external loading house. Where a yard in Gosforth is narrow, an angled loading house lets trailers approach on a diagonal and can sometimes fit more bays along one wall.

Any loading house proposed in Gosforth needs its planning and building control position checked, which we look at during the site survey before quoting.

For loading houses in Gosforth, we begin with a free site survey and a fixed written quote, so you know the scope and cost before committing. We take responsibility for managing the job, and specialist installation engineers carry it out under our supervision. Bays are taken out of use in a planned sequence so the rest of the dock keeps working, and evening or weekend work can be arranged. Each item is tested at handover and the documentation is left with you.

What happens on site when a loading house is installed?

Installing a loading house takes the bay out of use from the foundation works to commissioning, but the building can stay secure because the existing wall and door remain until late in the job.

  1. Foundations: concrete pads or footings are formed in the yard and left to cure.
  2. Erection: the steel frame is lifted into place, usually by crane, and fixed to the foundations and building.
  3. Cladding and equipment: panels, leveller, shelter or seal, bumpers and lights are fitted.
  4. Door and electrics: the building door is fitted or adapted and the leveller and lights connected.
  5. Commissioning: everything is tested with a trailer before handover.

We ask you to provide yard space for the crane and deliveries, any drawings of drains or buried services, a power supply, and clear arrangements for keeping vehicles and people away from the lifting zone. Neighbouring bays may need to close briefly while the crane is working.

How much does a loading house cost?

A loading house typically costs £14,500 to £32,000 per house, supplied and installed, excluding VAT. That covers the insulated structure with its leveller and shelter or seal; the figure for your site depends on size, layout and what has to happen to the building and yard.

What moves the price:

  • Size and layout: straight houses are simpler than angled ones, and larger houses use more steel and panel.
  • Leveller type: telescopic-lip levellers cost more than swing-lip.
  • Front sealing: inflatable shelters cost more than retractable shelters or foam seals.
  • Foundations: ground conditions and buried services decide the size of pads or footings.
  • Building works: forming or enlarging the wall opening, and a new insulated door if needed.
  • Electrics and access: supply to the leveller and lights, crane access and any out-of-hours working.

These are guide budgets. After a free site survey we send a written quote that is the fixed price. VAT is added at the standard rate.

Guide price, Gosforth
£14,500–£32,000 per house, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • Working hours, shift patterns and windows for out-of-hours work
  • Wall and steel structure for door, shelter and bumper fixings
  • Lighting inside trailers and at the dock face
  • Access for deliveries, cranes or lifting equipment during installation
  • Wind exposure at the dock, which affects door and shelter choice
  • Dock height and the mix of trailers you load

Options to discuss

Leveller choice

A hydraulic swing-lip leveller for general trailer loading, or a telescopic-lip leveller for precise placement, end-loading and trailers that cannot be reversed tight to the dock.

Straight loading house

Set square to the building wall, the simplest layout where the yard has room for trailers to reverse straight in. Usually the most economical arrangement for one or more bays.

Planning, building control and safety law in England

In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in Gosforth, so we confirm the requirement for your project and check what applies at survey before recommending a door.

Questions about loading houses in Gosforth

Will you deal with building control and planning for a project in Gosforth?

We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Gosforth, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

How long does installation take at a site in Gosforth?

It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.

Can a loading house be used for a cold store?

Yes. Loading houses suit chilled and frozen operations because the building door closes at the wall line, keeping the cold space sealed when no trailer is docked. The panels, door and shelter or seal are specified to suit the temperatures involved, which we confirm at survey.

Is a loading house cheaper than forming an internal pit?

Not always. A loading house includes a whole steel structure, so the equipment cost is higher, but it avoids breaking out the slab and losing internal floor space. The best comparison is made at survey, taking account of racking, services under the floor and how the building will be used.

Loading houses near Gosforth

Distances are measured from Gosforth. Nearby towns we cover include Newcastle upon Tyne (2 miles), Gateshead (3 miles) and Wallsend (3 miles), and other towns in the area are covered too.

Other loading bay services in Gosforth

Full guide to loading houses · Everything we do in Gosforth

If a loading bay in Gosforth needs attention, call us or send photos and details online.

Call freeGet a quote