- Location
- New Milton, Hampshire
- Main postcode district
- BH25
- Nearby (straight line)
- Christchurch (5 miles), Bournemouth (10 miles) and Ferndown (11 miles)
- Survey and quote
- Free, with a fixed written quote
A loading bay door automation package is an electric operator, control panel and set of safety devices fitted to an existing manual sectional door or roller shutter so it opens and closes at the press of a button. Once motorised, the door is a power-operated door, so it needs protection against trapping, such as a safety edge and photocells, and a way to be opened by hand if the power fails.
Where does this fit at a dock in New Milton?
Teams working on cold or wet docks in New Milton tend to leave doors open if they are hard to operate, so motorising them can help keep heat in. Upgrading manual docks to electric operation is a practical first step for sites in New Milton that later plan to add interlocks and traffic lights.
Any automation project in New Milton begins with checking the door by hand, because a motor cannot make up for weak springs or worn rollers.
We keep the process simple for sites in New Milton. A free survey tells us what the dock needs; a fixed written quote tells you what it will cost and what is included. We then organise the installation, with specialist engineers under our management and a programme agreed around your shifts. Night and weekend work is available by arrangement. Before we leave, the new equipment is tested, demonstrated and handed over with its documentation.
What is involved in fitting a motor to an existing dock door?
Fitting a motor to an existing dock door usually takes a few hours to a day per door, and starts with checking that the door itself is safe to automate.
- The door is checked for balance, spring condition, cable wear and track alignment.
- The operator is mounted on the shaft, ceiling rail or barrel bracket.
- The control panel is fixed in a safe position with a clear view of the door.
- A safety edge is fitted to the bottom rail and photocells are set across the opening.
- Limits, forces and controls are set, then the door is tested against the relevant safety checks.
You will need to provide a suitable isolated power supply near the door, or ask us to include it, and keep the door out of use during the work. Single-phase supplies suit many operators, but larger industrial operators may need three-phase power, which we confirm at survey.
Is my existing door suitable for automation?
An existing door is usually suitable for automation if it is structurally sound, correctly balanced and runs smoothly by hand. A motor should never be used to make up for a door that is heavy, stiff or damaged.
Signs a door can be automated:
- It lifts evenly by hand and stays put when released halfway.
- Springs, cables, rollers and tracks are in good order.
- Panels or laths are not badly dented or distorted.
Signs it may be better replaced:
- Springs are near the end of their life or have broken before.
- The door is single skin and the building is now heated.
- Parts are no longer available for the door model.
Where replacement makes more sense, we will say so and can quote for sectional loading bay doors supplied with an operator already fitted, so you can compare the two routes on cost.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Temperature requirements for chilled, frozen or ambient goods
- Wind exposure at the dock, which affects door and shelter choice
- Gaps around trailers where heated or chilled air escapes
- Asbestos register and any other site hazard information
- Power supply at each bay, including three-phase availability
- Forklift and pallet truck loads crossing the leveller platform
Options to discuss
Shaft-mounted operator
A compact industrial motor that fits directly onto the spring shaft of a sectional door, suited to heavy dock doors and bays that run many cycles a day.
Dock interlocks
Wiring that links the door to levellers, shelters, restraints or traffic lights so the dock can only run in a safe sequence.
Which rules apply in England?
Sites in New Milton fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about loading bay door automation in New Milton
Will you deal with building control and planning for a project in New Milton?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in New Milton, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Is the site survey in New Milton free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Can drivers open the door without leaving the forklift?
Yes, pull cords, radio remotes and induction loops in the floor can all open a powered door without the driver getting down. The right choice depends on traffic, and any opening method that does not need a button held must be paired with safety devices so the door cannot close on a vehicle or person.
How long does it take to automate a dock door?
Most automations are completed within a working day per door, once any repairs to the door itself have been done. Larger shutters, or doors that need a new power supply, can take longer. We plan the work so that only the door being automated is out of use.
Loading bay door automation near New Milton
Nearby places we cover, measured from New Milton, include Christchurch (5 miles), Bournemouth (10 miles) and Ferndown (11 miles). Ask if your own town is missing.
Other loading bay services in New Milton
Full guide to loading bay door automation · Everything we do in New Milton
For a written price on loading bay work in New Milton, request a quote and include photos of the bay if you can.