- Location
- New Milton, Hampshire
- Main postcode district
- BH25
- Nearby (straight line)
- Christchurch (5 miles), Bournemouth (10 miles) and Ferndown (11 miles)
- Survey and quote
- Free, with a fixed written quote
A cold store dock door is an insulated loading bay door built for chilled or frozen buildings, usually a sectional door with thick insulated panels or a high-speed door with an insulated curtain. It differs from a standard dock door in its thermal breaks, extra seals and, on freezer docks, heating in the frame or seals so that ice cannot lock the door shut or tear the seals.
What should sites in New Milton consider?
Food manufacturers in New Milton moving finished product into frozen storage need doors that resist ice and close quickly behind each forklift or trailer movement. For a packhouse in New Milton handling fresh produce, a well-sealed chilled dock door helps keep warm air out of the store once produce has been cooled.
When an older cold store in New Milton has a door that has been repaired many times, a planned replacement can be timed for a quieter trading period.
Your loading bay stays our responsibility from the survey to the handover. In New Milton, the survey and written quote are free, and the quoted price is fixed for the agreed scope. Installation is carried out by specialist engineers working under our management, at times planned with you to protect your loading schedule. Out-of-hours work is available by arrangement. We finish by testing the equipment and handing over its documentation.
How does a cold store door work with the shelter and leveller?
On a cold store dock the door, shelter and leveller should work as one system, with the door opening only once the trailer is sealed against the building and closing before the seal is released.
A typical sequence is:
- The trailer reverses onto the bumpers and is held by a restraint, or the driver's keys are taken.
- The shelter inflates or the seal compresses around the trailer.
- The door opens and the leveller lip is lowered onto the trailer bed.
- Loading takes place inside a sealed link between store and trailer.
- The leveller is stored, the door closes, then the shelter releases.
Interlocks make this sequence automatic, so the door cannot be left open with no trailer present. Insulated leveller platforms and seals around the pit also reduce cold loss through the floor of the bay.
How should a door be specified for a chilled dock compared with a freezer dock?
A chilled dock needs a well-insulated, well-sealed door, while a freezer dock also needs heating to stop ice forming in the frame and seals. The temperature difference across the door drives most specification choices.
- Chilled docks: an insulated sectional door at the thicker end of the common 40 to 80 mm panel range, good perimeter seals and a shelter or seal outside usually do the job.
- Freezer docks: thick panels, thermal breaks in the panel joints, heated side frames and a heated bottom seal, plus a fast operator to cut open time.
- Doors between zones: an insulated high-speed door often suits openings between a chilled marshalling area and a freezer, where traffic is constant.
- Vision panels: possible, but they reduce insulation and can mist, so many freezer docks leave them out.
A cold store door is only as good as the seal around the trailer, which is why we specify the door, shelter and leveller together.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Wall and steel structure for door, shelter and bumper fixings
- Clear opening width and height for each door
- Temperature requirements for chilled, frozen or ambient goods
- Access for deliveries, cranes or lifting equipment during installation
- Wind exposure at the dock, which affects door and shelter choice
- How often each door cycles during a typical shift
Options to discuss
Dock interlocks
Controls that link the door to the shelter, leveller and restraint so the door only opens when a trailer is docked and sealed against the building.
Insulated sectional cold store door
Thick insulated panels with thermal breaks and full perimeter seals, the usual choice for chilled and frozen external dock openings that also need to be secure overnight.
What do the rules in England mean for the work?
In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in New Milton, so we confirm the requirement for your project and check what applies at survey before recommending a door.
Questions about cold store dock doors in New Milton
Will you deal with building control and planning for a project in New Milton?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in New Milton, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
What details do you need from us to quote for cold store dock doors?
To get started, send the site address in New Milton, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Can a standard sectional door be used on a chilled dock?
A standard insulated sectional door can work on a chilled dock if its panels are thick enough and its seals are in good condition. For frozen docks it is not usually suitable, because it lacks the thermal breaks and frame heating needed to stop ice forming. We advise on the right specification after surveying the store.
What happens to a cold store door in a power cut?
In a power cut the door stops where it is and the frame heating switches off, so it must be possible to operate the door by hand. Powered dock doors normally have a hand chain, crank or release for this. We show your team how to use it at handover so the store can be closed up quickly.
Cold store dock doors near New Milton
Sites close to New Milton get the same service, including those in Christchurch (5 miles), Bournemouth (10 miles) and Ferndown (11 miles), with every job run the same way.
Other loading bay services in New Milton
Full guide to cold store dock doors · Everything we do in New Milton
Start your enquiry for New Milton through the quote tool. A few photos and approximate sizes help us respond with something useful.