Sectional loading bay doors in Greater London

In short

A sectional loading bay door is an overhead door made from horizontal insulated steel panels hinged together, which run up on rollers in side tracks and park beneath the ceiling or up the wall when open. Panels are commonly 40 to 80 mm thick, so the door seals and insulates better than a single-skin shutter, and it can be operated by hand chain, push-up or electric motor.

Is this right for your site in Greater London?

Food and drink businesses in Greater London running temperature-controlled goods-in areas can choose thicker panels to hold conditions steady between deliveries. For distribution sites in Greater London with heavy daily trailer traffic, an electric sectional door with photocells keeps the bay moving without staff hauling on a chain.

Our survey for a site in Greater London follows the same approach as anywhere else: measure the opening, check headroom and services, then quote a fixed price.

Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your Greater London site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.

How much does a sectional loading bay door cost?

A sectional loading bay door typically costs £2,400 to £5,200 per door, excluding VAT, supply and fit, for a made-to-measure insulated door fitted and working.

Where your door lands in the range depends on:

Opening size: larger doors need more panel area, heavier springs and longer track.
Panel thickness and finish: thicker insulated panels and non-standard colours add cost.
Track type: high-lift and vertical lift tracks use more steel and fixings than standard lift.
Operation: an electric operator with safety edge and photocells costs more than chain or push-up operation.
Vision panels and extras: glazed sections, interlocks to the leveller and links to traffic lights.
Site conditions: removing an old door, making good the opening, getting power to the door head and out-of-hours working.

We price after a free site survey, and the written quote is the fixed price for the work described. You can compare typical figures on our price guide.

Do sectional loading bay doors have to meet energy and safety rules?

Yes. New and replacement sectional loading bay doors fall under building energy rules and workplace safety law, and the detail differs between the four nations.

Energy: in England, Approved Document L (2021) Volume 2 sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. Wales, Scotland and Northern Ireland each have their own energy rules, and we confirm the figure that applies to your nation and project.
Falling back: the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, and the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993, require upward-opening doors to have a device that stops them falling back. On a sectional door that usually means spring break and cable break protection.
Product standard: BS EN 13241 is the product standard for industrial doors, and powered doors are also assessed against BS EN 12453 for safety in use.
Marking: a powered door in Great Britain may be UKCA or CE marked, while in Northern Ireland it is the CE mark, or CE with UKNI, that applies.

Towns we cover in Greater London

Looking for sectional loading bay doors in a specific part of Greater London? Start with the nearest town on this list.

Guide price

£2,400–£5,200 per door, ex VAT

Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.

Planning, building control and safety law in England

In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in Greater London, so we confirm the requirement for your project and check what applies at survey before recommending a door.

Questions

Do you cover Greater London for sectional loading bay doors?

Yes. We take on sectional loading bay doors for businesses in Greater London and across Greater London. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.

Is the site survey in Greater London free?

Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.

Can the door be supplied in our company colours?

Yes, panels come in a range of standard colours, and many manufacturers can supply other shades at extra cost and with a longer lead time. The inside face is usually white or light grey. We confirm the colour, finish and lead time in the written quote.

How is a sectional loading bay door locked?

A manual sectional door is usually locked with a slide bolt or shoot bolt on the inside, while an electric door is held closed by its operator. Because dock doors are secured from inside the building, extra locks are not often needed, but we can add bolts or a locking operator where security is a priority.

Other services in Greater London

Full guide to sectional loading bay doors · All loading bay services in Greater London