- Location
- Burnley, Lancashire
- Main postcode district
- BB11
- Nearby (straight line)
- Nelson (3 miles), Colne (5 miles) and Accrington (6 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
What matters for retractable dock shelters in Burnley?
For a dock in Burnley where wide pallets need the full trailer opening, a shelter keeps that width clear while still closing the gaps. Retail and e-commerce distribution centres in Burnley with high trailer turnover need tough sprung-frame shelters that recover quickly after each departure.
If a shelter on an older unit in Burnley has a sound frame but torn, faded curtains, replacing just the curtains can be the economical choice.
A single contact at Loading Bay Doors handles your project in Burnley from start to finish. The free site survey and fixed written quote come first, with no obligation to proceed. We then book the installation for times that suit the operation, including out of hours by arrangement, and manage the specialist engineers on site. At the end we commission and test the equipment, walk your team through it and provide the documentation.
How is a retractable dock shelter installed?
A retractable shelter is fixed to the outside face of the building around the dock door, working from powered access equipment in the yard. A single shelter usually takes a few hours to a day, depending on its size and the wall it fixes to.
- The wall is checked for fixing points; on cladding, a steel subframe or spreader plates are often needed.
- The frame is fixed and set level, centred on the door and leveller.
- Top and side curtains are hung and trimmed to meet the trailers you receive.
- Bumpers are checked, since they set how far the trailer pushes into the shelter.
- The shelter is tested with a trailer reversing in where possible.
You will need to keep the yard area in front of the bay clear for access equipment and take the bay out of use during fitting. No power supply is needed, and neighbouring bays can keep working while each shelter goes up.
Why do trailer door hinges matter when choosing a shelter?
Trailer door hinges matter because the rear doors are opened and folded back along the trailer sides before reversing, and the shelter has to accommodate them. If the shelter is too shallow, the hinges and doors sit outside it, leaving gaps or snagging the curtains.
A shelter handles this better than a seal:
- its side curtains drape over the opened doors and hinges rather than pressing against them,
- the full width of the trailer opening stays clear, because nothing protrudes in front of the trailer's rear frame,
- slit curtains wrap around hinge blocks without tearing.
By contrast, a dock seal presses against the rear of the trailer, so gaps at the hinges can remain, and poorly sized side pads can intrude into the opening. That is why shelters are generally favoured for mixed fleets, where hinge positions and trailer widths vary from one vehicle to the next.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Bumper position and wear or damage on the dock face
- Asbestos register and any other site hazard information
- Condition of any existing leveller pit, kerb angles and pit drainage
- Traffic routes for vehicles and separation of pedestrians
- Yard gradient and the slope of the approach to the dock
- Working hours, shift patterns and windows for out-of-hours work
Options to discuss
Slit side curtains
Vertical cuts in the side curtains that let them wrap around trailer door hinges and rear fittings without tearing, extending curtain life.
Rigid frame with long curtains
A fixed frame carrying long flexible curtains, useful where the trailer only needs to touch the curtains and the frame can stay clear of impact.
Regulations and approvals in England
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Burnley. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about retractable dock shelters in Burnley
Will you deal with building control and planning for a project in Burnley?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Which building and safety rules apply to a site in Burnley?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Burnley, we check what applies at survey and design to it.
Is VAT included in your guide prices for retractable dock shelters?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Lancashire as everywhere else: for retractable dock shelters, it is £1,900 to £4,400 per shelter, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Can a shelter be fixed to a cladded wall?
Yes, but cladding on its own is not usually strong enough to carry a shelter. We fix through to the building's steel frame behind the cladding, or use a steel subframe or spreader plates to spread the load, and confirm the method after inspecting the wall.
How do drivers know where to stop?
Bumpers set the stopping point, and many sites add dock lights, wheel guides and guide stripes on the shelter curtains to help drivers line up and reverse squarely. Traffic lights at the bay tell drivers when it is safe to reverse in and when they may leave.
Retractable dock shelters near Burnley
Distances are measured from Burnley. Nearby towns we cover include Nelson (3 miles), Colne (5 miles) and Accrington (6 miles), and other towns in the area are covered too.
Other loading bay services in Burnley
Full guide to retractable dock shelters · Everything we do in Burnley
Request a quote for your loading bay in Burnley, attaching photos of the dock, the equipment and any damage.