Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
Is this right for your site in Dyfed?
Mixed-age dock equipment at older sites in Dyfed benefits from a first service that records the condition of every item and prioritises any repairs. Servicing for dock equipment in Dyfed is priced per item per visit and agreed in writing before the first engineer attends site.
When you take on a unit in Dyfed with no maintenance history, a baseline service report gives you a clear starting point for future planning.
Planned servicing and reactive repairs in Dyfed are both chargeable. We agree the price of each visit in writing beforehand, and we never extend the scope without asking. Photos taken by your team help us plan the work and the parts. The engineer records the condition of doors, levellers, shelters and safety equipment as they go, and you receive that as a written report after the visit.
How much does loading bay servicing cost?
Loading bay servicing typically costs £85 to £180 per item per visit, excluding VAT, where an item is one door, leveller, shelter, restraint or lift table. Simple items such as a dock seal sit towards the lower end; high-speed doors and lift tables sit towards the top.
How the price is agreed:
- You send a list of equipment, with photos or asset labels if you have them.
- We agree the price per item and the visit schedule in writing before the first visit.
- Repairs found during a service are quoted separately and only done once you approve them.
What moves the price:
- Equipment type: powered doors, levellers and lift tables take longer than seals and lights.
- Number of items: larger sites spread travel and set-up across more items.
- Frequency: the number of visits a year.
- Timing: out-of-hours visits cost more.
- Location: remote and island sites carry travel costs, shown in advance.
VAT is added at the standard rate.
What inspections does the law require for loading bay equipment?
Loading bay equipment is work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so it must be maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
- Insurer inspections: engineering insurers commonly inspect dock levellers under PUWER at 12-month intervals. This is separate from servicing.
- Lift tables: scissor lift tables fall under LOLER 1998, or LOLER (Northern Ireland) 1999, with thorough examination at least every 12 months, every 6 months if they lift people, or to a written examination scheme.
- Levellers and LOLER: most levellers are treated under PUWER, but one designed or used to lift people may fall under LOLER. This depends on the equipment and how it is used; your insurer or competent person will confirm.
- Doors: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, and the Northern Ireland 1993 equivalent, require fall-back and anti-trap protection, so these devices are tested at every service.
Our guide to dock leveller inspections under PUWER and LOLER explains what applies.
Towns we cover in Dyfed
Find your town in the list below for details of loading bay servicing across Dyfed, or contact us if your location is not shown.
The visit price is agreed before anyone attends. All guide prices.
What do the rules in Wales mean for the work?
HSE regulates workplace safety in Wales. Loading bays in Dyfed need doors that meet regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, work equipment maintained under PUWER, and safeguards that stop vehicles leaving the dock too early. We check what applies before any work starts and build those measures into the design.
Questions
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
Can you repair all makes of loading bay equipment?
We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in Dyfed. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.
Are service visits chargeable?
Yes. Service visits are charged per item per visit, at a price agreed in writing before the first visit. Repairs found during a service are not included in that price; they are quoted separately and only carried out once you have approved them.
Do you service equipment you did not install?
Yes. We service all the common types of loading bay door, leveller, shelter, seal, restraint and lift table, whoever installed them. The first visit records the condition of each item, which gives you a baseline for future planning. Older or obsolete items are flagged in the report so you can budget for them.
Other services in Dyfed
Full guide to loading bay servicing · All loading bay services in Dyfed