- Location
- Carmarthen, Dyfed
- Main postcode district
- SA31
- Nearby (straight line)
- Llanelli (13 miles), Ammanford (14 miles) and Gorseinon (17 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
What should sites in Carmarthen consider?
Food, chilled and pharmaceutical operations around Carmarthen often prefer servicing outside loading peaks, which can be arranged with the price agreed beforehand. Property managers looking after several units around Carmarthen can use one servicing schedule and reporting format across every building they manage.
Distribution centres in Carmarthen running high trailer volumes commonly need twice-yearly servicing to keep springs, hydraulics and seals ahead of wear.
For loading bay servicing at sites in Carmarthen, you will always know the cost before anyone sets off. The visit is chargeable and its price is agreed in writing. Clear photos of the problem help the engineer arrive prepared. Where the visit reveals more work, we stop, explain and quote before going further, and a written report follows every attendance so you have a record of the condition of each item.
What inspections does the law require for loading bay equipment?
Loading bay equipment is work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so it must be maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
- Insurer inspections: engineering insurers commonly inspect dock levellers under PUWER at 12-month intervals. This is separate from servicing.
- Lift tables: scissor lift tables fall under LOLER 1998, or LOLER (Northern Ireland) 1999, with thorough examination at least every 12 months, every 6 months if they lift people, or to a written examination scheme.
- Levellers and LOLER: most levellers are treated under PUWER, but one designed or used to lift people may fall under LOLER. This depends on the equipment and how it is used; your insurer or competent person will confirm.
- Doors: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, and the Northern Ireland 1993 equivalent, require fall-back and anti-trap protection, so these devices are tested at every service.
Our guide to dock leveller inspections under PUWER and LOLER explains what applies.
How much does loading bay servicing cost?
Loading bay servicing typically costs £85 to £180 per item per visit, excluding VAT, where an item is one door, leveller, shelter, restraint or lift table. Simple items such as a dock seal sit towards the lower end; high-speed doors and lift tables sit towards the top.
How the price is agreed:
- You send a list of equipment, with photos or asset labels if you have them.
- We agree the price per item and the visit schedule in writing before the first visit.
- Repairs found during a service are quoted separately and only done once you approve them.
What moves the price:
- Equipment type: powered doors, levellers and lift tables take longer than seals and lights.
- Number of items: larger sites spread travel and set-up across more items.
- Frequency: the number of visits a year.
- Timing: out-of-hours visits cost more.
- Location: remote and island sites carry travel costs, shown in advance.
VAT is added at the standard rate.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Checks made while we are on site
- Inflatable shelter fans, airbags and control function
- Previous service and inspection records, where available
- Traffic light function and interlock operation
- Track alignment, rollers and wall fixings
- Hydraulic oil level, hoses and cylinders for leaks
- Leveller toe guards and side skirting, where fitted
Options to discuss
Lift table coordination
Servicing of scissor lift tables timed alongside the LOLER thorough examination regime set by your insurer or competent person, so defects are cleared before examination.
High-use programme
More frequent visits for docks running several shifts or very high trailer numbers, with the interval agreed after reviewing the equipment and how it is used.
Which rules apply in Wales?
Scissor lift tables and dock lifts in Wales can fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted, depending on the equipment and its use. For sites in Carmarthen, your insurer or competent person will confirm the regime, and we check what applies before any work starts.
Questions about loading bay servicing in Carmarthen
Can you repair all makes of loading bay equipment?
We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in Carmarthen. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Carmarthen site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
What happens if the engineer finds the equipment unsafe?
If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.
Is loading bay servicing the same as an insurer inspection?
No. Servicing is planned maintenance that keeps equipment working and safe, while an insurer inspection is an independent check, commonly every 12 months for levellers under PUWER. Many sites schedule a service shortly before each inspection, so routine defects are dealt with before the inspector attends.
What is included in the service price?
The service price covers checking, adjusting and lubricating each item, testing its safety devices and a written report. Parts and repair work are not included; they are quoted separately so you can decide what to approve. Minor adjustments made during the visit are part of the service.
Loading bay servicing near Carmarthen
Sites close to Carmarthen get the same service, including those in Llanelli (13 miles), Ammanford (14 miles) and Gorseinon (17 miles), with every job run the same way.
Other loading bay services in Carmarthen
Full guide to loading bay servicing · Everything we do in Carmarthen
If a loading bay in Carmarthen needs attention, call us or send photos and details online.