- Location
- Havant, Hampshire
- Main postcode district
- PO9
- Nearby (straight line)
- Emsworth (2 miles), Waterlooville (3 miles) and Portsmouth (6 miles)
- Survey and quote
- Free, with a fixed written quote
A loading bay conversion is a project that changes how a loading opening works, most often turning a ground-level door into a dock by lowering the approach, forming a leveller pit or adding a dock lift. It also covers upgrading older bays with new levellers, insulated doors, shelters and safety equipment while reusing the structure that is still sound.
Is this right for your site in Havant?
Changes of use on industrial estates around Havant, such as manufacturing to distribution, often mean the existing loading arrangements no longer match the vehicles arriving. Planning and building control questions for a conversion in Havant are checked during the survey, so the programme allows for any approvals that are needed.
Busy operations near Havant that cannot close the whole dock can phase a conversion bay by bay, keeping enough doors open to maintain throughput.
We keep the process simple for sites in Havant. A free survey tells us what the dock needs; a fixed written quote tells you what it will cost and what is included. We then organise the installation, with specialist engineers under our management and a programme agreed around your shifts. Night and weekend work is available by arrangement. Before we leave, the new equipment is tested, demonstrated and handed over with its documentation.
What are the ways to convert a ground-level door into a dock?
There are three main ways to convert a ground-level door into a dock: lower the yard to form a recessed approach, install a dock lift at the door, or add a dock alongside the building. The right one depends on yard space, levels and how many trailers you handle.
- Recessed approach: the yard is excavated on a gradient so the trailer bed meets the building floor, with a leveller and drainage at the dock face. Best for high trailer volumes where there is yard depth for the ramp.
- Dock lift: a scissor lift table at the door raises goods to trailer height. Good for tight sites and mixed fleets.
- Edge-of-dock solutions: where the height difference is small, a modest recess with an edge-of-dock leveller can be enough.
Upgrades to existing docks follow the same survey: replacing mechanical levellers, swapping shutters for insulated doors, and adding shelters and restraints. Our guide to converting a ground-level door into a loading dock compares the methods.
Does a loading bay conversion need building regulations approval or planning permission?
A loading bay conversion often needs building approval, and sometimes planning permission, so we check both at survey before the design is fixed. Forming a new opening or a dock pit is a structural alteration.
- England and Wales: Building Regulations approval may be needed.
- Scotland: a building warrant may be needed.
- Northern Ireland: building control approval may be needed.
External changes such as a new dock approach, a loading house or a canopy can need planning permission. We never assume permission is not needed.
Replacement doors also fall under energy rules. In England, Approved Document L (2021) Volume 2 sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. Wales, Scotland and Northern Ireland have their own energy rules, and we confirm the figure that applies to your nation and project.
Once complete, the new equipment is work equipment under PUWER, or PUWER (Northern Ireland) 1999, and must be maintained and inspected.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Working hours, shift patterns and windows for out-of-hours work
- Dock height and the mix of trailers you load
- Traffic routes for vehicles and separation of pedestrians
- Access for deliveries, cranes or lifting equipment during installation
- Yard gradient and the slope of the approach to the dock
- Control positions, isolators and any existing interlocks
Options to discuss
Pit and leveller retrofit
Forming or rebuilding a pit in a raised floor to take a modern hydraulic leveller in place of a fixed dock edge or an old mechanical leveller.
Recessed dock approach
The yard is lowered on a ramp so the trailer bed meets the building floor, with a leveller pit, retaining walls and drainage. Suited to high trailer volumes with yard depth.
What do the rules in England mean for the work?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Havant. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about loading bay conversions in Havant
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Havant site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
How do you price loading bay conversions for a site in Havant?
Guide budgets for supply and fit are £18,000 to £45,000 per bay, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Is VAT included in your guide prices for loading bay conversions?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Hampshire as everywhere else: for loading bay conversions, it is £18,000 to £45,000 per bay, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Is a recessed dock or a dock lift better?
A recessed dock is usually better for high trailer volumes, because forklifts drive straight on and off. A dock lift suits tight sites, mixed fleets and lower volumes, and avoids excavating the yard. The survey looks at space, levels, drainage and traffic before recommending one.
Who carries out the groundworks for a conversion?
Groundworks are carried out by specialist contractors working under our management, so you have one point of contact for the whole conversion. The groundworks are designed around the equipment chosen, which avoids the mismatches that can happen when civils and dock equipment are bought separately.
Loading bay conversions and upgrades near Havant
The same survey, quote and repair service is available in towns around Havant, such as Emsworth (2 miles), Waterlooville (3 miles) and Portsmouth (6 miles).
Other loading bay services in Havant
Full guide to loading bay conversions · Everything we do in Havant
Start your enquiry for Havant through the quote tool. A few photos and approximate sizes help us respond with something useful.