Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Repairs and servicing · Havant

Dock shelter and seal repairs in Havant

Whatever the size of the operation, we can take on dock shelter and seal repairs in Havant, with every job run by us and carried out by specialists we manage directly.

Guide £380–£1,800 per repair ex VATVisit priced before we attendPO9
Book a visit0800 088 6248
Location
Havant, Hampshire
Main postcode district
PO9
Nearby (straight line)
Emsworth (2 miles), Waterlooville (3 miles) and Portsmouth (6 miles)
Visit pricing
Agreed in writing before we attend
Dock shelter and seal repairs, in short

Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.

What matters for dock shelter and seal repairs in Havant?

Exposed yards in Havant that catch strong winds can tear shelter curtains or strain frames, letting weather into the dock until parts are replaced. Inflatable shelters at food sites in Havant depend on blowers and airbags working properly, and a slow-inflating shelter is worth checking before it fails.

Older retractable shelters on estates around Havant can often be refurbished with new curtains and pads rather than replaced, provided the frame is still sound.

For dock shelter and seal repairs in Havant, the visit is chargeable and priced up front. You will know the cost in writing before an engineer is booked. Photos of the problem, the make and model if known, and a description of what happens when the equipment is operated all help us prepare. If further work is needed, we quote it separately before doing it, and a written report closes every visit.

Why is my dock shelter or seal letting in draughts?

A dock shelter or seal lets in draughts when the material that should press against the trailer is torn, worn, too short or no longer in the right place. Daylight around a docked trailer is the clearest sign.

  • Torn or shrunk curtains: side curtains no longer overlap the trailer sides.
  • Short head curtain: taller trailers than the shelter was sized for leave a gap across the top.
  • Flattened seal pads: foam that has lost its spring no longer closes the gap.
  • Worn pad covers: exposed foam soaks up water and breaks down faster.
  • Bent frame: a retractable shelter frame that no longer returns square.
  • Airbag or blower fault: inflatable shelters that inflate slowly or lose pressure.
  • Trailer position: off-centre parking or worn bumpers that let trailers crush one side.

On chilled docks, gaps also show up as condensation, ice on the dock floor or frost around the door.

How much does a dock shelter or seal repair cost?

A dock shelter or seal repair typically costs £380 to £1,800 per repair, excluding VAT. A pair of side curtains or seal pad covers sits towards the lower end; a full curtain set, a new frame or a set of airbags with a blower sits towards the top.

How the price is agreed:

  1. You describe the damage and send photos, ideally with a trailer docked.
  2. We agree the visit price in writing before anyone attends. Where parts are made to measure, that may cover a measuring visit and a fitting visit.
  3. Any extra work found on site is quoted and approved by you before it is done.

What moves the price:

  • Parts: curtains, pads, airbags, blowers and frames differ widely in cost.
  • Size: taller and wider shelters need more material.
  • Access: head curtains and top pads may need powered access equipment.
  • Number of bays and timing: several bays together lower the cost per bay; out-of-hours work adds to it.

VAT is added at the standard rate.

Guide price, Havant
£380–£1,800 per repair, ex VAT

The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.

What else does the engineer check at the bay?

  • Wiring, isolators and motor performance under load
  • Previous service and inspection records, where available
  • Traffic light function and interlock operation
  • Hydraulic oil level, hoses and cylinders for leaks
  • Pit frame welds, platform cracks and structural damage
  • Safety edges, photocells and light curtains

Options to discuss

Frame repairs

Straightening or replacing bent arms, springs and frames on retractable shelters damaged by off-centre trailers, so the shelter returns square after each docking.

Seal pad refurbishment

Replacing worn foam pads, or just their covers where the foam is still sound, including tougher facings on the areas where trailers rub most.

Planning, building control and safety law in England

Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Havant. Planning and Building Regulations questions are never assumed either way: we check what applies before any work starts, so you know before work is booked.

Questions about dock shelter and seal repairs in Havant

Can you repair all makes of loading bay equipment?

We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in Havant. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.

Can repairs be carried out outside our working hours?

Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Havant site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.

What happens if the engineer finds the equipment unsafe?

If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.

How is the price for a shelter or seal repair agreed?

You describe the damage and send photos, and we agree the visit price in writing before anyone attends. For made-to-measure parts that may include a measuring visit. Any extra work found on site is quoted and only carried out once you approve it.

Can repairs help a chilled loading bay?

Yes. Gaps around a docked trailer let chilled air escape and warm, moist air in, which causes condensation and ice on the dock floor. Restoring the curtains, pads or airbags closes those gaps, helping keep the dock drier and safer to work in.

Dock shelter and seal repairs near Havant

Distances are measured from Havant. Nearby towns we cover include Emsworth (2 miles), Waterlooville (3 miles) and Portsmouth (6 miles), and other towns in the area are covered too.

Other loading bay services in Havant

Full guide to dock shelter and seal repairs · Everything we do in Havant

Call us or request a quote online to talk through loading bay work at your site in Havant.

Call freeGet a quote