Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Shelters and seals · Biggleswade

Inflatable dock shelters in Biggleswade

If your site in Biggleswade needs inflatable dock shelters, we can help, whether the dock serves a cold store, a parcel operation, a food factory or a trade counter.

Guide £6,800–£12,800 per shelter ex VATFree site surveySG18
Location
Biggleswade, Bedfordshire
Main postcode district
SG18
Nearby (straight line)
Letchworth Garden City (8 miles), St Neots (9 miles) and Bedford (9 miles)
Survey and quote
Free, with a fixed written quote
Inflatable dock shelters, in short

An inflatable dock shelter is a dock shelter with air-filled fabric cushions at the top and sides of the opening, kept deflated and close to the building until a trailer has reversed in. A fan then inflates the cushions so they press against the trailer roof and sides, giving a close seal that adapts to different trailer widths and heights, and deflates again before the trailer leaves.

How does this suit sites in Biggleswade?

Specifying a new temperature-controlled warehouse in Biggleswade is the ideal time to design inflatable shelters in with the doors and levellers, so controls are integrated from the start. Pharmaceutical distributors around Biggleswade working to tight temperature limits may want the close seal an inflatable shelter gives during every load.

Operators replacing foam seals in Biggleswade that keep wearing out against ill-fitting trailers may find an inflatable shelter suffers far less rubbing.

Step one is a survey at your site in Biggleswade, which costs nothing and carries no obligation. Step two is a written quote with a fixed price and a clear scope. Step three is installation, scheduled around your operation and carried out by specialist installation engineers working under our management, including evenings or weekends if agreed. Step four is handover, when the equipment is tested in front of you and the paperwork is passed over.

What maintenance does an inflatable dock shelter need?

An inflatable shelter needs regular checks on its fabric, fan and controls, because a puncture or a weak fan stops it sealing properly. Planned servicing catches most faults before they affect the cold chain.

  • Cushion fabric: inspect for punctures, abrasion and failed seams, and patch or replace cushions as needed.
  • Fan unit: check filters, motor and airflow so the cushions inflate fully and promptly.
  • Retraction system: straps, weights or springs must pull the cushions back clear of the trailer.
  • Controls and interlocks: confirm the sequence with the door, leveller and restraint still works.
  • Frame and fixings: look for impact damage and corrosion.

Snow and ice on the top cushion can stop it retracting, so a check before winter is worthwhile. Service and repair visits are chargeable, and the price is agreed before anyone attends.

How does an inflatable shelter work with the dock door and leveller?

An inflatable shelter is the first step in the dock sequence: it seals around the trailer before the door opens and only deflates once the door has closed. Getting that order right is what makes it effective.

  1. The trailer reverses onto the bumpers, guided by dock lights and wheel guides.
  2. The trailer is secured by restraint or key control, and the outside light shows red.
  3. The cushions inflate around the top and sides of the trailer.
  4. With the trailer sealed, the door opens and the leveller is deployed.
  5. After loading, the leveller is stored and the door closed.
  6. The cushions deflate and retract, and the light turns green.

Deflated cushions must sit clear of the door and leveller, and internal straps or weights pull them back so trailers do not catch them. Interlocks make each step depend on the last, so staff cannot open the door onto an unsealed trailer.

Guide price, Biggleswade
£6,800–£12,800 per shelter, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • How often each door cycles during a typical shift
  • Condition of any existing leveller pit, kerb angles and pit drainage
  • Escape routes and pedestrian doors close to the bay
  • Wall and steel structure for door, shelter and bumper fixings
  • Headroom above the opening and which track type will suit it
  • Scope to convert ground-level doors into docks or add lift tables

Options to discuss

Interlocked controls

Controls linked to the door, leveller and restraint so the shelter inflates before the door opens and deflates only once it has closed.

Top cushion only

A single inflatable cushion across the top of the opening, paired with fixed side pads or curtains, for docks where trailer heights vary more than widths.

Which rules apply in England?

Sites in Biggleswade fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.

Questions about inflatable dock shelters in Biggleswade

Can you work alongside our main contractor on a new build in Biggleswade?

Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.

What warranty comes with new loading bay equipment?

New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Biggleswade site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.

Is the site survey in Biggleswade free?

Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.

Do the cushions touch the trailer as it reverses in?

No, the cushions stay deflated and pulled back against the building while the trailer reverses in, so there is no rubbing as it docks. They inflate only once the trailer is in position and secured, which reduces wear on the fabric compared with foam seals and curtain shelters.

Can a punctured cushion be repaired?

Small punctures and tears can usually be patched, and a badly damaged cushion can be replaced on its own without changing the frame or fan. Repairs are carried out on a chargeable visit, with the price agreed before anyone attends.

Inflatable dock shelters near Biggleswade

Close neighbours of Biggleswade with their own pages here: Letchworth Garden City (8 miles), St Neots (9 miles) and Bedford (9 miles). Choose one to see coverage details for that town.

Other loading bay services in Biggleswade

Full guide to inflatable dock shelters · Everything we do in Biggleswade

Start your enquiry for Biggleswade through the quote tool. A few photos and approximate sizes help us respond with something useful.

Call freeGet a quote