- Location
- Biggleswade, Bedfordshire
- Main postcode district
- SG18
- Nearby (straight line)
- Letchworth Garden City (8 miles), St Neots (9 miles) and Bedford (9 miles)
- Survey and quote
- Free, with a fixed written quote
Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
How does this suit sites in Biggleswade?
Whether your unit in Biggleswade has one dock or twenty, the survey looks at each bay's existing controls before we quote a fixed price in writing. Loading docks in Biggleswade where drivers wait in their cabs for a hand signal can replace guesswork with a clear red and green light at every bay.
Distribution centres near Biggleswade taking trailers from many different hauliers benefit from a signal every driver understands, regardless of language or familiarity with the site.
We do not give a fixed price without seeing the site. A free survey in Biggleswade lets us check the details that affect the job, and the written quote that follows is a fixed price for the agreed scope. We plan the work around your operation, arrange out-of-hours access if you need it and manage specialist installation engineers throughout. Handover includes testing, a demonstration and the paperwork you need for your records.
What does HSE guidance say about stopping drivers leaving too early?
HSE guidance (followed by HSENI in Northern Ireland) says there should be safeguards against drivers driving away from a loading bay too early, and it names traffic lights as one of the measures. Vehicle or trailer restraints, and the person in charge keeping keys or paperwork until it is safe, are the others listed in HSE's guide to workplace transport safety (HSG136) and its loading factsheet.
Traffic lights are a signal, not a physical barrier, so they work best as part of a clear procedure or alongside a restraint. Your risk assessment should decide the combination. In Northern Ireland the regulator is HSENI.
Interlocks also touch on door safety law. Under regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, or the Northern Ireland 1993 equivalent, powered doors need suitable and effective features to prevent them trapping anyone. Interlocks must never bypass those features, and door control work should respect BS EN 12453, the standard for safety in use of power-operated doors.
Read more in our guide to preventing drive-away and trailer creep.
Which interlocks should a loading bay have?
The most useful loading bay interlocks stop the door opening until the trailer is in place or restrained, and stop the leveller operating until the door is fully open. Beyond that, the right set depends on the equipment fitted and your risk assessment.
- Door to restraint: the door cannot open until the restraint is engaged or a trailer is detected.
- Leveller to door: the leveller cannot be raised until the door is fully open, which prevents the lip hitting door panels.
- Door to leveller: the door cannot close until the leveller is back in its parked position.
- Restraint release: the restraint only releases once the door is closed and the leveller parked.
- Shelter to trailer: an inflatable shelter only inflates when a trailer is docked.
On a bay without a restraint, a trailer presence sensor can take its place in the door logic, although it confirms a trailer is there rather than holding it. Combining interlocks with vehicle restraints gives the strongest protection against drive-away.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Wheel guide positions and yard markings for reversing vehicles
- Dock height and the mix of trailers you load
- Yard gradient and the slope of the approach to the dock
- Power supply at each bay, including three-phase availability
- Wind exposure at the dock, which affects door and shelter choice
- Drainage on recessed or sloping dock approaches
Options to discuss
Full bay interlock panel
A single control panel that runs the door, leveller, restraint and shelter in the correct sequence, with indicators showing which step is active or blocked.
Standalone LED traffic lights
A red and green pair for each bay, one outside for the driver and one inside for dock staff, switched manually from a control beside the door.
Which rules apply in England?
Sites in Biggleswade fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about dock traffic lights and interlocks in Biggleswade
How long does installation take at a site in Biggleswade?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Biggleswade site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Will you deal with building control and planning for a project in Biggleswade?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Do traffic lights and interlocks need maintenance?
Yes. Lights, sensors and interlocks should be checked at each planned service visit, including testing the full sequence and confirming that steps attempted out of order are blocked. As part of the dock equipment they fall under PUWER, which requires work equipment to be maintained in a safe condition.
Which way round do the inside and outside lights work?
The inside and outside lights always show opposite colours. While a trailer is being loaded, the outside light is red so the driver stays put and the inside light is green so staff can work. When loading is finished and the door is closed, the inside light turns red and the outside light turns green for the driver.
Dock traffic lights and interlocks near Biggleswade
We also cover towns near Biggleswade, including Letchworth Garden City (8 miles), St Neots (9 miles) and Bedford (9 miles). Each has its own page with the same services and process.
Other loading bay services in Biggleswade
Full guide to dock traffic lights and interlocks · Everything we do in Biggleswade
Whether it is a new bay or a fault on an existing one, call us or request a quote for your site in Biggleswade.