A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
Is this right for your site in Edinburgh and the Lothians?
A warehouse in Edinburgh and the Lothians running long shifts with constant forklift traffic puts a lot of cycles through a door, so the drive and its duty rating need to suit. Whether your site in Edinburgh and the Lothians is a new build or an older unit, we survey the opening, traffic and power before recommending any high-speed door.
Replacing tired strip curtains is one reason a business in Edinburgh and the Lothians might consider a high-speed door, especially where drivers struggle to see through scratched strips.
Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your Edinburgh and the Lothians site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
Can a high-speed door be used on an external dock opening?
Yes, provided it is specified for the wind and weather the opening faces. Many high-speed doors are designed for internal openings, so an external dock door needs a reinforced build.
- Wind resistance: external doors use stronger curtains, horizontal wind bars or tensioned belts, and deeper side guides so the curtain stays put in gusts.
- Insulation: a double-skin curtain reduces heat loss, though fabric does not insulate as well as a thick sectional door.
- Security: fabric doors are not security doors, so many sites keep a sectional door or shutter outside for closing at night.
- Impact protection: a self-repairing curtain re-engages after a knock, which matters at a busy dock.
For openings that are mainly internal, such as between goods-in and a chilled zone, a lighter single-skin door with vision panels is usually enough. We match the build to the exposure at survey.
Towns we cover in Edinburgh and the Lothians
We provide high-speed dock doors right across Edinburgh and the Lothians. Pick the town closest to your site from the list below.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
What do the rules in Scotland mean for the work?
In Scotland, building work such as forming a new opening or a dock leveller pit may need a building warrant from the local authority before it starts. For sites in Edinburgh and the Lothians, external structures such as loading houses or canopies may also need planning permission from the council. We check what applies at survey and factor any approvals into the programme.
Questions
Can you work outside our normal operating hours in Edinburgh and the Lothians?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
How do you price high-speed dock doors for a site in Edinburgh and the Lothians?
Guide budgets for supply and fit are £6,500 to £14,500 per door, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Do high-speed doors help with temperature control?
Yes, by cutting the time the opening is left open, a high-speed door reduces the warm or chilled air that escapes. It closes behind each forklift instead of standing open between movements. An insulated curtain adds some thermal resistance, but the main gain comes from shorter open times rather than the curtain itself.
How often should a high-speed door be serviced?
Service frequency should follow how hard the door works, and a busy high-speed door usually needs more visits than a quiet sectional door. We agree a schedule based on cycles per day, the manufacturer's recommendations and any history of impacts. Every visit should include a check of the light curtain, photocells and bottom edge.
Other services in Edinburgh and the Lothians
Full guide to high-speed dock doors · All loading bay services in Edinburgh and the Lothians