Vehicle restraints in Stonehaven

Location: Stonehaven, Aberdeen and Aberdeenshire
Main postcode district: AB39
Nearby (straight line): Aberdeen (13 miles), Westhill (13 miles) and Montrose (20 miles)
Survey and quote: Free, with a fixed written quote

Vehicle restraints, in short

A vehicle restraint is a device at a loading bay that physically holds a trailer against the dock until it is safe to leave. In the UK most systems act on the rear wheel, either as a powered wheel-based restraint or a sensor wheel chock. Restraints guard against early drive-away and trailer creep, and are usually interlocked with the door and dock traffic lights.

Is this right for your site in Stonehaven?

Multi-tenant logistics parks around Stonehaven can benefit from restraints when several tenants share yard space and trailers from different fleets arrive throughout the day. A warehouse in Stonehaven that already uses traffic lights may want to add restraints so the door cannot open until the trailer is physically held in place.

Yards around Stonehaven that park uncoupled trailers at the dock can see trailers creep under forklift traffic, and a wheel-based restraint helps keep the leveller lip on the bed.

Step one is a survey at your site in Stonehaven, which costs nothing and carries no obligation. Step two is a written quote with a fixed price and a clear scope. Step three is installation, scheduled around your operation and carried out by specialist installation engineers working under our management, including evenings or weekends if agreed. Step four is handover, when the equipment is tested in front of you and the paperwork is passed over.

Wheel-based or hook restraint: which suits UK trailers?

Wheel-based restraints and sensor wheel chocks suit most UK trailers, because they act on the rear wheel rather than on the back of the vehicle. Hook restraints, which catch the rear impact guard (sometimes called an ICC bar), are common elsewhere but suit fewer UK fleets.

Wheel-based restraint: a steel guide rail fixed to the yard, with an arm or chock that moves against the rear wheel, either powered or pushed into place by the operative. It works regardless of tail lifts or underrun guard design.
Sensor wheel chock: a heavy chock placed in front of the wheel, with a sensor or parking station that tells the dock controls it is in position. Lower cost and minimal groundwork, but it relies on someone placing it each time.
Hook restraint: mounted on the dock face and hooking the rear guard. UK and European trailers vary widely at the rear, and tail lifts often get in the way, so this type needs checking against your actual fleet.

How much does a vehicle restraint cost?

A vehicle restraint typically costs £4,200 to £9,800 per bay, supplied and installed, excluding VAT. Sensor wheel chocks linked to the dock controls usually sit towards the lower end, and fully automatic wheel-based restraints with rail and interlocks towards the upper end.

What moves the price:

Restraint type: a sensor chock needs far less hardware and groundwork than a powered, rail-mounted wheel restraint.
Yard condition: rail-mounted units need a sound, level concrete apron. Broken concrete or tarmac may need a new base, priced after survey.
Cabling: the distance from the restraint to the dock control panel, and whether ducts must be cut into the yard.
Integration: linking to existing door and leveller controls is simpler on modern panels; older panels may need replacing.
Number of bays and working hours: several bays in one project spread set-up costs, while out-of-hours work adds cost.

All figures are guide budgets. After a free site survey we send a written quote, and that quote is the fixed price. VAT is added at the standard rate.

Guide price, Stonehaven

£4,200–£9,800 per bay, ex VAT

The same published guide range applies across Scotland; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

Wheel guide positions and yard markings for reversing vehicles
Wall and steel structure for door, shelter and bumper fixings
Gaps around trailers where heated or chilled air escapes
Escape routes and pedestrian doors close to the bay
Dock height and the mix of trailers you load
Clear opening width and height for each door

Options to discuss

Hook restraint

A dock-mounted hook that catches the trailer's rear impact guard. Only suitable where your fleet has compatible rear guards, which we check carefully at survey.

Automatic wheel-based restraint

A powered arm on a yard-mounted rail that locates against the rear wheel at the push of a button and signals the dock controls once the trailer is held.

Planning, building control and safety law in Scotland

Doors and dock equipment installed in Scotland may carry the UKCA or the CE mark, and we pass on the documentation for everything fitted in Stonehaven. Because building warrant and planning questions can affect the programme, we check what applies at survey and raise any approvals early rather than assuming none are needed.

Questions about vehicle restraints in Stonehaven

Do you cover Stonehaven for vehicle restraints?

Yes. We take on vehicle restraints for businesses in Stonehaven and across Aberdeen and Aberdeenshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.

What warranty comes with new loading bay equipment?

New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Stonehaven site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Stonehaven, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

Will a vehicle restraint slow down loading?

Engaging a restraint adds only a short step to each docking, and once it is part of the interlock sequence it becomes routine for dock staff. Many sites find that a clear sequence actually reduces delays, because there is less confusion about when it is safe to open the door or release the driver.

Can a vehicle restraint be fitted to an existing bay?

Yes, restraints are commonly retrofitted to existing bays. The main questions are whether the yard concrete in front of the bay is sound enough to anchor a rail, how cables will reach the dock controls, and whether the existing door and leveller panels can accept interlocks. Sensor chocks are often chosen where groundwork needs to be kept to a minimum.

Vehicle restraints near Stonehaven

If your site is not in Stonehaven itself, it may be near one of these: Aberdeen (13 miles), Westhill (13 miles) and Montrose (20 miles). Pick the closest.

Other loading bay services in Stonehaven

Full guide to vehicle restraints · Everything we do in Stonehaven

Tell us what is happening at your Stonehaven dock, what equipment is there and when it is used, and we will suggest the right next step.