Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Lifts and loading houses · Blackpool

Scissor lift tables in Blackpool

This page explains how we handle scissor lift tables for sites in Blackpool: what we look at, how the work is organised and what to send us to get things moving.

Guide £9,500–£28,000 per lift ex VATFree site surveyFY1
Book a free survey0800 088 6248
Location
Blackpool, Lancashire
Main postcode district
FY1
Nearby (straight line)
Poulton-le-Fylde (3 miles), Thornton-Cleveleys (4 miles) and Lytham St Annes (6 miles)
Survey and quote
Free, with a fixed written quote
Scissor lift tables, in short

A scissor lift table, often called a dock lift, is a powered platform raised and lowered by a hydraulic scissor mechanism to move goods between two levels. At a loading bay it lifts pallets and pallet trucks from ground level to the height of a trailer bed, making it a practical alternative to a raised dock where forming one is not possible.

What should sites in Blackpool consider?

Food, drink and pharmaceutical sites around Blackpool that need clean, controlled loading points may prefer a lift table with bellows enclosing the scissor mechanism. Each lift table enquiry from Blackpool is surveyed and quoted in the same way as any other UK site, with groundworks for a pit priced separately.

Where ground conditions in Blackpool make a deep recessed dock costly, a pit-mounted or surface-mounted lift table can be the more practical option.

We never ask you to commit before you have a fixed price. A free survey at your Blackpool site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.

How much does a scissor lift table cost?

A scissor lift table for a loading bay typically costs £9,500 to £28,000 per lift, supplied and installed, excluding VAT. Smaller surface-mounted lifts sit towards the lower end; large, high-capacity pit lifts with gates and bridge plates sit towards the top.

What moves the price:

  • Capacity: dock lifts are typically rated somewhere between 2,000 and 6,000 kg, and heavier ratings need a stronger mechanism.
  • Platform size and travel: larger platforms and greater lift heights cost more.
  • Mounting: pit-mounted or surface-mounted with a ramp.
  • Safety equipment: bellows or skirts, toe guards, rails, gates and bridge plates.
  • Electrics and access: supply to the power pack, delivery access and out-of-hours working.

Forming a pit, drainage and other groundworks are priced separately after survey. Following a free site survey, the written quote is the fixed price. VAT is added at the standard rate.

What safety features should a loading bay lift table have?

A loading bay lift table should protect people from the scissor mechanism, stop if anything is trapped under the platform, and stop people or loads falling from the edges. Lift tables are specified to BS EN 1570-1:2024, and common features include:

  • Toe guards: trip bars or sensitive edges around the platform underside that stop the lift descending on contact.
  • Safety bellows or skirts: a flexible enclosure that keeps hands, feet and debris out of shear and crush points.
  • Guard rails and gates: on open sides, sized to how people and pallet trucks move on and off.
  • Bridge plate: a hinged plate that rests on the trailer bed to bridge the gap.
  • Hold-to-run controls: the lift only moves while the button is held, with a stop button within reach.
  • Hydraulic protection: valves that stop the platform dropping if a hose fails.
  • Maintenance props: supports that hold the platform up safely during servicing.
Guide price, Blackpool
£9,500–£28,000 per lift, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • Scope to convert ground-level doors into docks or add lift tables
  • Whether planning, building control or a building warrant may be needed
  • Dock height and the mix of trailers you load
  • Bumper position and wear or damage on the dock face
  • Access for deliveries, cranes or lifting equipment during installation
  • Temperature requirements for chilled, frozen or ambient goods

Options to discuss

Bridge plate

A hinged plate on the platform end that rests on the trailer bed during loading, bridging the gap so pallet trucks can cross smoothly between lift and trailer.

Guard rails and gates

Fixed rails and gated sides around the platform, arranged to suit the goods and how operators and pallet trucks move on and off the lift.

Planning, building control and safety law in England

Lift tables and dock lifts in Blackpool may fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted. It depends on the equipment and how it is used, and your insurer or competent person will confirm. Dock levellers are usually treated as work equipment under PUWER. We check what applies at survey.

Questions about scissor lift tables in Blackpool

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Blackpool, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

Which building and safety rules apply to a site in Blackpool?

It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Blackpool, we check what applies at survey and design to it.

What details do you need from us to quote for scissor lift tables?

To get started, send the site address in Blackpool, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Can a forklift drive on to a scissor lift table?

Only if the lift has been designed and rated for forklift traffic. Most loading bay lift tables are built for pallet trucks, and a forklift's weight and wheel loads need a much heavier platform and mechanism. Tell us how you load at survey so the lift is specified correctly.

Can people ride on a dock lift?

Some lift tables are designed to carry an operator with the load, and others are for goods only. If the lift carries people, LOLER thorough examinations are typically needed every 6 months rather than every 12, unless a written examination scheme sets a different interval. Your insurer or competent person will confirm.

Scissor lift tables near Blackpool

Sites close to Blackpool get the same service, including those in Poulton-le-Fylde (3 miles), Thornton-Cleveleys (4 miles) and Lytham St Annes (6 miles), with every job run the same way.

Other loading bay services in Blackpool

Full guide to scissor lift tables · Everything we do in Blackpool

Call us or request a quote online to talk through loading bay work at your site in Blackpool.

Call freeGet a quote