- Location
- Alton, Hampshire
- Main postcode district
- GU34
- Nearby (straight line)
- Bordon (5 miles), Farnham (9 miles) and Basingstoke (9 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Why do sites in Alton choose this?
Third-party logistics sites in Alton receiving trailers from many hauliers usually need a shelter rather than a seal, because widths and heights vary. Industrial landlords in Alton refreshing a multi-let estate can fit shelters that suit a range of future tenants and the trailers they may use.
If a shelter on an older unit in Alton has a sound frame but torn, faded curtains, replacing just the curtains can be the economical choice.
Step one is a survey at your site in Alton, which costs nothing and carries no obligation. Step two is a written quote with a fixed price and a clear scope. Step three is installation, scheduled around your operation and carried out by specialist installation engineers working under our management, including evenings or weekends if agreed. Step four is handover, when the equipment is tested in front of you and the paperwork is passed over.
How much does a retractable dock shelter cost?
A retractable dock shelter typically costs £1,900 to £4,400 per shelter, excluding VAT, supply and fit. Most of the variation comes from size, projection and the curtain specification.
- Size: width and height, set by your door and the largest trailers you receive.
- Projection: deeper shelters cost more but leave room for opened trailer doors and the leveller lip.
- Curtains: heavier-grade fabrics, slit side curtains, adjustable top curtains and guide stripes.
- Frame: sprung, pantograph or rigid, in a galvanised or painted finish.
- Fixings: fixing to cladding usually needs a steel subframe or spreader plates.
- Access and removal: powered access equipment in the yard, and taking down an old shelter.
On an older shelter with a sound frame, new curtains may be all that is needed, and we will say so if that is the case. Every price is fixed in the written quote after a free site survey.
How do I size a retractable shelter for my trailers?
Size a retractable shelter to the largest trailer you receive, with a projection deep enough for opened trailer doors and the leveller lip, and curtains that still reach the smallest vehicles. The trailer mix sets almost every dimension.
- Width: wider than the trailer, so the side curtains drape along its sides rather than across the opening.
- Height: high enough for the tallest trailers, with a top curtain deep enough to reach the roof of the lowest.
- Projection: deep enough for the rear doors, folded back along the trailer sides, to sit inside the curtains.
- Curtain cut-outs: vertical slits let the side curtains wrap around hinges and rear fittings without tearing.
- Guide stripes: contrasting stripes on the curtains help drivers centre the trailer.
If your fleet is uniform, a seal may give a tighter fit. Our guide to shelters and seals sets out the trade-offs.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Control positions, isolators and any existing interlocks
- Escape routes and pedestrian doors close to the bay
- Asbestos register and any other site hazard information
- Wall and steel structure for door, shelter and bumper fixings
- How drivers are prevented from pulling away too early
- Temperature requirements for chilled, frozen or ambient goods
Options to discuss
Sprung-frame shelter
Side frames on springs that fold back when a trailer pushes in and recover when it leaves, a robust choice for busy docks and mixed fleets.
Guide stripes
Contrasting high-visibility stripes on the curtains that give drivers a clear target to aim for when reversing onto the bay.
What do the rules in England mean for the work?
Sites in Alton fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about retractable dock shelters in Alton
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Alton, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can you work outside our normal operating hours in Alton?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Is VAT included in your guide prices for retractable dock shelters?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Hampshire as everywhere else: for retractable dock shelters, it is £1,900 to £4,400 per shelter, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Does a dock shelter keep a building warm?
A shelter reduces the draughts and rain entering the dock around a trailer, which helps keep the loading area warmer. It does not seal as closely as a dock seal or inflatable shelter, so for chilled and frozen docks those options are usually preferred.
Can a shelter be fixed to a cladded wall?
Yes, but cladding on its own is not usually strong enough to carry a shelter. We fix through to the building's steel frame behind the cladding, or use a steel subframe or spreader plates to spread the load, and confirm the method after inspecting the wall.
Retractable dock shelters near Alton
The same survey, quote and repair service is available in towns around Alton, such as Bordon (5 miles), Farnham (9 miles) and Basingstoke (9 miles).
Other loading bay services in Alton
Full guide to retractable dock shelters · Everything we do in Alton
Get in touch about loading bay doors and dock equipment in Alton: call, email or use the quote tool.