- Location
- Telford, Shropshire
- Main postcode district
- TF3
- Nearby (straight line)
- Wellington (3 miles), Shrewsbury (13 miles) and Wolverhampton (15 miles)
- Survey and quote
- Free, with a fixed written quote
A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
How does this suit sites in Telford?
Goods-in areas in Telford that leave the main door open during long unloading sessions can use a strip curtain to hold back draughts and dust. Wind-driven rain and leaves blowing into an open dock are a familiar nuisance, and a heavy-duty strip curtain is one simple response for sites in Telford.
Measuring an opening in Telford for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time.
Before anything is ordered, we visit your site in Telford for a free survey and then send a written quote with a fixed price. From that point we manage the installation, coordinating delivery, access and any other trades. Fitting is done by specialist installation engineers engaged and managed by us, at times that suit your operation, including out of hours where agreed. You get a tested installation, a demonstration for your team and the manufacturer documentation.
How often do PVC strips need replacing?
PVC strips need replacing when they become scratched, cloudy, split or shortened, and how often that happens depends almost entirely on traffic. A curtain at a busy forklift opening wears far faster than one at a quiet pedestrian door.
Signs that strips are due for replacement:
- You can no longer see clearly through them.
- Strips have torn at the top fixing or split along their length.
- Gaps have opened because strips have shrunk or been cut short.
- Low-temperature strips have stiffened and no longer fall back into place.
Individual strips can be swapped without replacing the whole curtain, which keeps costs down. Cleaning with a mild detergent helps visibility, while solvents can damage the PVC. Moving strips from the busy centre to the edges, and back, spreads the wear more evenly.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Whether planning, building control or a building warrant may be needed
- Gaps around trailers where heated or chilled air escapes
- Drainage on recessed or sloping dock approaches
- Working hours, shift patterns and windows for out-of-hours work
- Bumper position and wear or damage on the dock face
- Clear opening width and height for each door
Options to discuss
Standard clear strips
Clear flexible PVC for ambient warehouses and goods-in areas, giving good visibility and draught control at pedestrian and forklift openings.
Sliding or swing-away rail
A rail that lets the whole curtain be moved clear of the opening for wide loads, cleaning or seasonal removal without taking the strips down.
Regulations and approvals in England
Workplace safety in England is regulated by HSE. For a loading bay in Telford, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about PVC strip curtains in Telford
How long does installation take at a site in Telford?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
What details do you need from us to quote for PVC strip curtains?
To get started, send the site address in Telford, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Will you deal with building control and planning for a project in Telford?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Are strip curtains a good alternative to a high-speed door?
Strip curtains are a good low-cost option for moderate traffic, but at very busy openings a high-speed door often performs better because it clears fully for each vehicle and closes behind it. The right choice depends on traffic volume, visibility needs and budget.
Can strips be replaced individually?
Yes, individual strips can be unhooked or unclamped and replaced without taking down the whole curtain. Keeping a few spare strips on site lets your team swap damaged ones as soon as they appear, which keeps visibility and sealing consistent across the opening.
PVC strip curtains near Telford
We also cover towns near Telford, including Wellington (3 miles), Shrewsbury (13 miles) and Wolverhampton (15 miles). Each has its own page with the same services and process.
Other loading bay services in Telford
Full guide to PVC strip curtains · Everything we do in Telford
Phone us to discuss your loading bay in Telford, or start with the online quote tool if you prefer to send details first.