A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
How does this suit sites in Shropshire?
In a warehouse in Shropshire where doors stay open for much of the shift, strip curtains offer a practical first step before considering a high-speed door. Smaller trade units in Shropshire with a single goods door may find a strip curtain the most economical way to keep the working area warmer in winter.
Wind-driven rain and leaves blowing into an open dock are a familiar nuisance, and a heavy-duty strip curtain is one simple response for sites in Shropshire.
Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your Shropshire site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.
Which strip width, thickness and grade should I choose?
Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.
- Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
- Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
- Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
- Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
- Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
- Specialist grades: anti-static, tinted or opaque, or welding grade for screening.
Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.
How much do PVC strip curtains cost?
PVC strip curtains typically cost £180 to £1,100 per opening, excluding VAT, supply and fit. Small pedestrian doorways sit at the bottom of the range, and large dock openings with heavy-duty strips and sliding rails at the top.
The price depends on:
- Opening size: the width sets the number of strips and the height sets their length.
- Strip width and thickness: wider, thicker strips cost more but last longer under forklift traffic.
- Overlap: a greater overlap seals better and uses more material.
- Grade: standard, low-temperature, ribbed, anti-static, tinted or welding grades.
- Rail type: a fixed rail, or a sliding or swing-away rail that clears the opening for large loads.
- Fixing: whether the rail fixes straight to the lintel or needs brackets or a steel header.
Because strips wear, we can also price spare strips so your team can replace damaged ones. The written quote after a free site survey is the fixed price, and you can start the process through our quote form.
Towns we cover in Shropshire
Looking for PVC strip curtains in a specific part of Shropshire? Start with the nearest town on this list.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Which rules apply in England?
Workplace safety in England is regulated by HSE. For a loading bay in Shropshire, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions
Can you work outside our normal operating hours in Shropshire?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Is the site survey in Shropshire free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Can strips be replaced individually?
Yes, individual strips can be unhooked or unclamped and replaced without taking down the whole curtain. Keeping a few spare strips on site lets your team swap damaged ones as soon as they appear, which keeps visibility and sealing consistent across the opening.
How do I clean PVC strip curtains?
Clean strips with warm water and a mild detergent, then wipe them dry. Avoid solvents and abrasive pads, which damage the surface and make strips cloud faster. In food areas, follow your site's hygiene schedule and choose a grade suited to regular cleaning.
Other services in Shropshire
Full guide to PVC strip curtains · All loading bay services in Shropshire