A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
What should sites in Shropshire consider?
Food producers in Shropshire with hygiene zones can choose smooth, easily cleaned curtains and frames that suit washdown areas next to the loading dock. Replacing tired strip curtains is one reason a business in Shropshire might consider a high-speed door, especially where drivers struggle to see through scratched strips.
A warehouse in Shropshire running long shifts with constant forklift traffic puts a lot of cycles through a door, so the drive and its duty rating need to suit.
Any project involving high-speed dock doors at a working site in Shropshire takes planning. We survey free of charge, quote a fixed price in writing, and then agree a programme that keeps as much of the dock running as possible. Specialist installation engineers carry out the work under our management, out of hours if that suits you better. On completion we test each item, show your team how it operates and leave the documentation with you.
Which safety rules and standards apply to a high-speed door?
A high-speed door is a power-operated door, so it must protect people from being struck or trapped, and it should be designed and tested to the product and safety-in-use standards for powered doors.
- Workplace law: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, and the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993, require powered doors to have suitable and effective features to prevent trapping. Where needed for health or safety, the door must be operable by hand unless it opens automatically on power failure.
- Standards: BS EN 13241 is the product standard for industrial doors, and BS EN 12453 covers safety in use of power-operated doors, including test methods.
- Marking: in Great Britain the door may carry the UKCA or the CE mark. In Northern Ireland the CE mark, or CE with UKNI, applies.
In practice that means a light curtain or photocells across the opening, a safe bottom edge and a manual release or crank. HSE enforces these duties in Great Britain, and HSENI in Northern Ireland.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
Towns we cover in Shropshire
Each of the following towns in Shropshire has its own page on high-speed dock doors, covering how we work and what to send us.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Regulations and approvals in England
Sites in Shropshire fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions
Do you cover Shropshire for high-speed dock doors?
Yes. We take on high-speed dock doors for businesses in Shropshire and across Shropshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
Will you deal with building control and planning for a project in Shropshire?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Is a high-speed door secure enough to be the only door at a dock?
Usually not on an external dock. Fabric curtains are designed for speed and draught control rather than security, so most sites keep an insulated sectional door or shutter on the outside for closing at night. Some rigid high-speed designs give more security, and we can discuss them where a single door is needed.
Can a high-speed door be opened in a power cut?
Yes, a high-speed door should have a manual release, crank or counterbalance so it can be opened if the power fails. This reflects the workplace rule that powered doors must be operable by hand where needed for health or safety, unless they open automatically on power failure.
Other services in Shropshire
Full guide to high-speed dock doors · All loading bay services in Shropshire