Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
How does this suit sites in Perth and Kinross?
Mixed-age dock equipment at older sites in Perth and Kinross benefits from a first service that records the condition of every item and prioritises any repairs. Servicing for dock equipment in Perth and Kinross is priced per item per visit and agreed in writing before the first engineer attends site.
Property managers looking after several units around Perth and Kinross can use one servicing schedule and reporting format across every building they manage.
For loading bay servicing in Perth and Kinross, the visit is chargeable and priced up front. You will know the cost in writing before an engineer is booked. Photos of the problem, the make and model if known, and a description of what happens when the equipment is operated all help us prepare. If further work is needed, we quote it separately before doing it, and a written report closes every visit.
What happens to defects found during a service?
Defects found during a service are recorded in the written report, graded by priority and quoted as repairs before any work is done. You decide what is repaired and when.
- Unsafe: the item should not be used until repaired. The engineer tells you on the day and the item is left out of use.
- Repair soon: wear or damage that will get worse, such as a weeping hose or a fraying cable.
- Monitor: early wear to check again at the next visit.
Each repair is priced in writing, and parts can be ordered once you approve so the work can often be done on a planned return visit. Keeping service reports alongside insurer reports gives a clear maintenance record for audits, insurers and landlords.
Over time the reports also show which items keep failing, which helps when deciding whether to keep repairing equipment or budget for replacement.
What happens on site during a service visit?
During a service visit the engineer works through the dock bay by bay, taking each item out of use only while it is being checked. Most of the dock keeps working throughout.
- Agree the order: the engineer meets the dock manager and agrees which bays are released when.
- Isolate: each item is isolated and locked off, and levellers are propped before anyone works underneath.
- Service and test: checks, adjustments and safety device tests are carried out.
- Hand back: each bay is returned to use once tested, with any unsafe item left out of use and reported straight away.
It helps if you can provide an equipment list with asset numbers, previous service and insurer reports, a contact on the day, and bays released as agreed. Out-of-hours visits can be arranged where daytime access is difficult, at a price agreed beforehand.
Towns we cover in Perth and Kinross
We take enquiries about loading bay servicing from across Perth and Kinross. These are the towns with their own pages:
The visit price is agreed before anyone attends. All guide prices.
Regulations and approvals in Scotland
In Scotland, building work such as forming a new opening or a dock leveller pit may need a building warrant from the local authority before it starts. For sites in Perth and Kinross, external structures such as loading houses or canopies may also need planning permission from the council. We check what applies before any work starts and factor any approvals into the programme.
Questions
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
What happens if the engineer finds the equipment unsafe?
If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.
Do you service equipment you did not install?
Yes. We service all the common types of loading bay door, leveller, shelter, seal, restraint and lift table, whoever installed them. The first visit records the condition of each item, which gives you a baseline for future planning. Older or obsolete items are flagged in the report so you can budget for them.
Are service visits chargeable?
Yes. Service visits are charged per item per visit, at a price agreed in writing before the first visit. Repairs found during a service are not included in that price; they are quoted separately and only carried out once you have approved them.
Other services in Perth and Kinross
Full guide to loading bay servicing · All loading bay services in Perth and Kinross