Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
Is this right for your site in Leicestershire?
Servicing for dock equipment in Leicestershire is priced per item per visit and agreed in writing before the first engineer attends site. Property managers looking after several units around Leicestershire can use one servicing schedule and reporting format across every building they manage.
When you take on a unit in Leicestershire with no maintenance history, a baseline service report gives you a clear starting point for future planning.
For loading bay servicing at sites in Leicestershire, you will always know the cost before anyone sets off. The visit is chargeable and its price is agreed in writing. Clear photos of the problem help the engineer arrive prepared. Where the visit reveals more work, we stop, explain and quote before going further, and a written report follows every attendance so you have a record of the condition of each item.
How often should a loading bay be serviced?
Busy loading docks are commonly serviced twice a year, while lightly used bays may only need one visit a year. The right frequency depends on how hard the equipment works and what your risk assessment, the manufacturer's instructions and your insurer expect.
- Twice a year: common for distribution and logistics docks handling trailers through the day.
- Once a year: may suit occasional-use bays, such as a single goods-in door at a manufacturing site.
- More often: worth considering for docks running several shifts, very high door cycle counts, or harsh conditions such as frozen stores.
Insurer inspections and LOLER thorough examinations run on their own schedules. Many sites time a service shortly before each inspection so routine defects are dealt with first.
Our guide to loading bay maintenance sets out what a service covers and how to plan the frequency.
What does a loading bay service visit include?
A loading bay service visit includes checking, adjusting and lubricating each item, testing its safety devices and recording its condition. Typical checks by equipment type:
- Doors: springs, cables, balance, rollers, hinges, tracks, safety edges, photocells, fall-back devices, controls and manual operation.
- Levellers: hydraulic leaks and oil level, hoses, cylinders, lip and hinges, deck condition, toe guards, controls and the maintenance strut.
- Shelters and seals: curtains, frames, pads, covers, airbags and blowers.
- Restraints, lights and interlocks: engagement, sensors and the full interlock sequence.
- Bumpers and wheel guides: wear and fixings.
- Lift tables: toe guards, bellows, hydraulics, controls and gates.
Minor adjustments and lubrication are part of the service. Anything needing parts or more time is recorded and quoted as a repair, so you stay in control of spend.
Towns we cover in Leicestershire
We provide loading bay servicing right across Leicestershire. Pick the town closest to your site from the list below.
- Leicester
- Loughborough
- Hinckley
- Coalville
- Wigston Magna
- Melton Mowbray
- Market Harborough
- Oadby
- Earl Shilton
- Mountsorrel
- Castle Donington
- Lutterworth
The visit price is agreed before anyone attends. All guide prices.
Regulations and approvals in England
Workplace safety in England is regulated by HSE. For a loading bay in Leicestershire, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies before any work starts and design the bay accordingly.
Questions
Do you provide a written report after each visit?
Yes. After every repair or service visit to a site in Leicestershire, you receive a written report setting out what was checked, what was found, what work was carried out and anything that still needs attention, with a quote for further work where needed. The report is useful for your maintenance records and for discussions with your insurer or inspector.
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
Can servicing be carried out outside operating hours?
Yes, servicing can be arranged for evenings or weekends where daytime access is difficult. Out-of-hours visits cost more, and that price is agreed in writing before the visit. Many sites prefer quieter periods so bays can be released without affecting trailer arrivals.
Do you service equipment you did not install?
Yes. We service all the common types of loading bay door, leveller, shelter, seal, restraint and lift table, whoever installed them. The first visit records the condition of each item, which gives you a baseline for future planning. Older or obsolete items are flagged in the report so you can budget for them.
Other services in Leicestershire
Full guide to loading bay servicing · All loading bay services in Leicestershire