- Location
- Caterham, Surrey
- Main postcode district
- CR3
- Nearby (straight line)
- Redhill (5 miles), Reigate (6 miles) and Sutton (7 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay door repair covers diagnosing and fixing faults on industrial dock doors, including sectional overhead doors, roller shutters and high-speed fabric doors. Typical work includes replacing broken springs and cables, damaged panels, rollers and hinges, repairing motors and control panels, and restoring safety devices such as safety edges and photocells so the door works safely and closes securely again.
Is this right for your site in Caterham?
Repair requests from Caterham are handled in the same way as anywhere in the UK, with the price agreed before anyone attends and a written report afterwards. Busy dock doors in Caterham cycle many times a day, so springs and cables reach the end of their working life sooner than on lightly used doors.
Ageing doors on industrial units around Caterham may use obsolete parts, and photos of labels and fittings help us find compatible replacements before the visit.
For loading bay door repairs in Caterham, the visit is chargeable and priced up front. You will know the cost in writing before an engineer is booked. Photos of the problem, the make and model if known, and a description of what happens when the equipment is operated all help us prepare. If further work is needed, we quote it separately before doing it, and a written report closes every visit.
Why has my loading bay door stopped working?
Most loading bay door failures come down to a handful of causes: a broken spring, a damaged cable, a safety device fault, worn running gear or a motor and control problem. The symptom usually points to the cause.
- Door suddenly heavy, or motor straining: often a broken torsion spring.
- Door hanging lower on one side: a frayed or snapped lift cable, or a cable slipping on its drum.
- Door stops and reverses, or will not close: a dirty, misaligned or damaged photocell or safety edge.
- Grinding, juddering or noisy running: worn rollers or hinges, or a bent track after an impact.
- Motor hums but nothing moves, or no response: motor, gearbox, control board, limit settings or supply.
- High-speed door curtain out of its guides: a breakaway curtain that needs resetting, or a torn curtain.
If a door has a broken spring or cable, stop using it and keep people clear. Do not try to adjust springs yourself: they hold a great deal of stored energy.
What safety rules apply to loading bay doors?
Loading bay doors are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, and by the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993. Several common repairs relate directly to those duties.
- Fall-back protection: upward-opening doors need a device to stop them falling back. Broken springs and cables put this under strain, so spring and cable safety devices are checked on every repair.
- Trapping protection: powered doors need suitable and effective features to prevent trapping, such as safety edges and photocells. A door whose safety devices do not work should not be used until repaired.
- Manual operation: where needed for health or safety, powered doors must be operable by hand unless they open automatically on power failure.
Doors are also work equipment under PUWER 1998, or PUWER (Northern Ireland) 1999, and must be maintained in a safe condition. BS EN 12453 sets out safety requirements for power-operated doors, and BS EN 13241 is the product standard. The regulator is HSE in Great Britain and HSENI in Northern Ireland.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Checks made while we are on site
- Traffic light function and interlock operation
- Inflatable shelter fans, airbags and control function
- Hydraulic oil level, hoses and cylinders for leaks
- Vehicle restraint engagement and its signal sequence
- Shelter curtains, frames and side pads for tears
- Wiring, isolators and motor performance under load
Options to discuss
Spring and cable replacement
Replacing broken torsion springs and frayed or snapped lift cables, rebalancing the door and checking the devices that stop an upward-opening door falling back.
Motor and control repairs
Fault-finding and repairing motors, gearboxes, control panels, limit settings and wiring on powered loading bay doors, including manual override checks.
Planning, building control and safety law in England
In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in Caterham, so we confirm the requirement for your project and check what applies before any work starts before recommending a door.
Questions about loading bay door repairs in Caterham
How often should equipment at our Caterham site be serviced?
It depends on how hard the equipment works and on the manufacturer's recommendations. A multi-shift dock with frequent trailer movements needs more attention than a door that opens a few times a day. We suggest a schedule after looking at the equipment and how it is used, and we can line visits up with your insurance inspections where that helps.
How is a repair or service visit in Caterham priced?
Repair and service visits are chargeable, and the price is agreed in writing before anyone attends. For loading bay door repairs, the guide budget is £180 to £1,400 per repair, excluding VAT. The exact figure depends on the fault, parts, access and timing. If the engineer finds further work on the day, it is quoted for your approval before it is carried out.
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Caterham site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
Can a door repair be carried out outside working hours?
Yes, repairs can be arranged in the evening or at weekends where that suits your operation. Out-of-hours working costs more, and that price is agreed in writing before the visit, in the same way as any other repair. Timing is agreed with you for each job.
Is a loading bay door repair visit chargeable?
Yes, every repair visit is chargeable, and the price is agreed with you in writing before anyone attends. If the engineer finds that more work or extra parts are needed once on site, that work is quoted and only carried out once you have approved it.
Loading bay door repairs near Caterham
Businesses outside Caterham may find their nearest town in this list: Redhill (5 miles), Reigate (6 miles) and Sutton (7 miles). Each page covers doors, docks, repairs and servicing.
Other loading bay services in Caterham
Full guide to loading bay door repairs · Everything we do in Caterham
Phone us to discuss your loading bay in Caterham, or start with the online quote tool if you prefer to send details first.