- Location
- Horley, Surrey
- Main postcode district
- RH6
- Nearby (straight line)
- Crawley (4 miles), Redhill (5 miles) and Reigate (5 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay door repair covers diagnosing and fixing faults on industrial dock doors, including sectional overhead doors, roller shutters and high-speed fabric doors. Typical work includes replacing broken springs and cables, damaged panels, rollers and hinges, repairing motors and control panels, and restoring safety devices such as safety edges and photocells so the door works safely and closes securely again.
How does this suit sites in Horley?
Busy dock doors in Horley cycle many times a day, so springs and cables reach the end of their working life sooner than on lightly used doors. If a dock door at a site in Horley will not close, tell us about any security concerns so the visit and making the building secure can be planned together.
Multi-tenant estates around Horley often have doors of different ages and types, and each repair is priced individually with the visit cost agreed in writing first.
Servicing and repairs work slightly differently from installations. Visits to sites in Horley are chargeable, and the price is set out in writing before anyone comes out. To help us prepare, send photos of the equipment and the fault. The engineer carries out the agreed work, flags anything else that needs attention and quotes it before touching it. Afterwards, a written report records the condition of each item.
What happens when an engineer attends to repair a dock door?
When an engineer attends, the bay is closed, the door is made safe and isolated, and the fault is diagnosed before any repair starts. Only the affected bay needs to stop.
- Isolate the bay: no trailer on the dock, the leveller parked and the area around the door coned off.
- Make safe: the door is electrically isolated and locked off, and spring tension is released or the door supported before work begins.
- Diagnose: the engineer confirms the cause. Anything beyond the agreed scope is quoted before it is done.
- Repair and test: parts are fitted, the door is balanced and every safety device is tested.
If a door cannot be repaired on the first visit, for example because a matched panel must be ordered, it is left secure where possible and a return visit agreed.
It helps if you can provide access to the bay, a contact on site, any labels showing the door size and serial details, and permit-to-work information. To arrange a visit, contact us with a description of the fault.
What safety rules apply to loading bay doors?
Loading bay doors are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, and by the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993. Several common repairs relate directly to those duties.
- Fall-back protection: upward-opening doors need a device to stop them falling back. Broken springs and cables put this under strain, so spring and cable safety devices are checked on every repair.
- Trapping protection: powered doors need suitable and effective features to prevent trapping, such as safety edges and photocells. A door whose safety devices do not work should not be used until repaired.
- Manual operation: where needed for health or safety, powered doors must be operable by hand unless they open automatically on power failure.
Doors are also work equipment under PUWER 1998, or PUWER (Northern Ireland) 1999, and must be maintained in a safe condition. BS EN 12453 sets out safety requirements for power-operated doors, and BS EN 13241 is the product standard. The regulator is HSE in Great Britain and HSENI in Northern Ireland.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What we look at around the bay
- Anti-fall device on upward-opening doors
- Vehicle restraint engagement and its signal sequence
- Wiring, isolators and motor performance under load
- Track alignment, rollers and wall fixings
- Inflatable shelter fans, airbags and control function
- Previous service and inspection records, where available
Options to discuss
Spring and cable replacement
Replacing broken torsion springs and frayed or snapped lift cables, rebalancing the door and checking the devices that stop an upward-opening door falling back.
Motor and control repairs
Fault-finding and repairing motors, gearboxes, control panels, limit settings and wiring on powered loading bay doors, including manual override checks.
Which rules apply in England?
In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in Horley, so we confirm the requirement for your project and check what applies before any work starts before recommending a door.
Questions about loading bay door repairs in Horley
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Horley site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
Do you cover Surrey for loading bay door repairs?
Yes. We take on loading bay door repairs for sites in Horley and throughout Surrey. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
What information helps before a repair visit?
Photos or a short video of the fault are the most useful thing you can send, along with the make and model from the data plate, a description of what happens when the equipment is operated and any error codes. For a site in Horley, also tell us about access, parking and site rules. With that, we can price the visit and bring the likely parts.
Do you replace one spring or both?
On doors with two springs, we normally recommend replacing both at the same time, because they have done the same number of cycles and the second spring is likely to fail soon after the first. We explain the options and prices before any work is done.
Is it safe to use a door with a broken spring?
No. A door with a broken spring or cable should be taken out of use and the area kept clear, because the door may be heavy, unbalanced or at risk of dropping. Springs store a great deal of energy, so do not try to adjust or remove them yourself.
Loading bay door repairs near Horley
Businesses outside Horley may find their nearest town in this list: Crawley (4 miles), Redhill (5 miles) and Reigate (5 miles). Each page covers doors, docks, repairs and servicing.
Other loading bay services in Horley
Full guide to loading bay door repairs · Everything we do in Horley
Get in touch about loading bay doors and dock equipment in Horley: call, email or use the quote tool.