- Location
- Long Eaton, Derbyshire
- Main postcode district
- NG10
- Nearby (straight line)
- Castle Donington (5 miles), Ilkeston (5 miles) and Nottingham (6 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
What matters for high-speed dock doors in Long Eaton?
Yards that are open to the weather in Long Eaton may need a wind-reinforced build, because a standard internal high-speed door is not designed for gusts at an external opening. Food producers in Long Eaton with hygiene zones can choose smooth, easily cleaned curtains and frames that suit washdown areas next to the loading dock.
Manufacturers around Long Eaton moving work in progress between production and dispatch can use high-speed doors to stop dust and draughts crossing departments.
It starts with a free site survey in Long Eaton, where we measure the openings, check the dock and talk through how the bay is used. You then receive a fixed written quote. Once you accept, we manage the job: specialist installation engineers carry out the work under our management, planned around your deliveries, and out-of-hours working can be arranged. At handover we test everything with you and leave the documentation.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
Which safety rules and standards apply to a high-speed door?
A high-speed door is a power-operated door, so it must protect people from being struck or trapped, and it should be designed and tested to the product and safety-in-use standards for powered doors.
- Workplace law: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, and the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993, require powered doors to have suitable and effective features to prevent trapping. Where needed for health or safety, the door must be operable by hand unless it opens automatically on power failure.
- Standards: BS EN 13241 is the product standard for industrial doors, and BS EN 12453 covers safety in use of power-operated doors, including test methods.
- Marking: in Great Britain the door may carry the UKCA or the CE mark. In Northern Ireland the CE mark, or CE with UKNI, applies.
In practice that means a light curtain or photocells across the opening, a safe bottom edge and a manual release or crank. HSE enforces these duties in Great Britain, and HSENI in Northern Ireland.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Temperature requirements for chilled, frozen or ambient goods
- Control positions, isolators and any existing interlocks
- Asbestos register and any other site hazard information
- Headroom above the opening and which track type will suit it
- Bumper position and wear or damage on the dock face
- Yard gradient and the slope of the approach to the dock
Options to discuss
Insulated double-skin curtain
Two layers of fabric with an air gap or insulation between them, reducing heat or chill loss at openings between temperature zones or at external docks.
Vision panels
Clear sections set into the curtain so drivers and pedestrians can see each other through the closed door, which matters where forklift routes cross walkways.
Planning, building control and safety law in England
Workplace safety in England is regulated by HSE. For a loading bay in Long Eaton, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about high-speed dock doors in Long Eaton
What details do you need from us to quote for high-speed dock doors?
To get started, send the site address in Long Eaton, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Long Eaton site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Will you deal with building control and planning for a project in Long Eaton?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
How fast does a high-speed door open?
Many dock and internal high-speed doors open at around 1 to 2 metres per second, so a typical opening clears in a few seconds. Speed depends on the size, the drive and whether the door is built for wind. Closing speed is usually set slower than opening for safety, and both are adjusted at handover.
Is a high-speed door secure enough to be the only door at a dock?
Usually not on an external dock. Fabric curtains are designed for speed and draught control rather than security, so most sites keep an insulated sectional door or shutter on the outside for closing at night. Some rigid high-speed designs give more security, and we can discuss them where a single door is needed.
High-speed dock doors near Long Eaton
If your site is not in Long Eaton itself, it may be near one of these: Castle Donington (5 miles), Ilkeston (5 miles) and Nottingham (6 miles). Pick the closest.
Other loading bay services in Long Eaton
Full guide to high-speed dock doors · Everything we do in Long Eaton
For a written price on loading bay work in Long Eaton, request a quote and include photos of the bay if you can.