- Location
- Nottingham, Nottinghamshire
- Main postcode districts
- NG1, NG3 and NG7
- Nearby (straight line)
- West Bridgford (2 miles), Arnold (3 miles) and Hucknall (6 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
Why do sites in Nottingham choose this?
Food producers in Nottingham with hygiene zones can choose smooth, easily cleaned curtains and frames that suit washdown areas next to the loading dock. Busy cross-dock and parcel operations in Nottingham can use a high-speed door behind the main dock door to keep traffic flowing while limiting the time the bay stands open.
Manufacturers around Nottingham moving work in progress between production and dispatch can use high-speed doors to stop dust and draughts crossing departments.
How does an installation in Nottingham work? First, a free, no-obligation survey to measure up and understand the operation. Next, a fixed written quote. Then a programme agreed with you, so the work fits around deliveries, with out-of-hours slots if needed. The installation itself is carried out by specialist engineers who answer to us, and it finishes with testing, a walk-through for your staff and a handover pack.
Should a high-speed door replace our strip curtain or work alongside our dock door?
At very busy openings a high-speed door often replaces a strip curtain, and at external docks it usually works alongside a slower insulated door rather than replacing it.
Strip curtains are inexpensive, but they slow forklifts, scratch quickly and can hide a pedestrian on the other side. A high-speed door clears the opening fully, closes again within seconds and keeps a clear view through its vision panels. See PVC strip curtains if you are weighing up the two.
At external docks, a common arrangement is:
- an insulated sectional door on the outside for security and closing at night,
- a high-speed door just inside it for daytime traffic,
- an interlock so the high-speed door only runs when the outer door is open.
This pairing keeps the building secure out of hours while cutting the time the opening stands open during the working day.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Power supply at each bay, including three-phase availability
- Wall and steel structure for door, shelter and bumper fixings
- Whether planning, building control or a building warrant may be needed
- Clear opening width and height for each door
- Escape routes and pedestrian doors close to the bay
- How often each door cycles during a typical shift
Options to discuss
Radar, loop and pull-cord activation
Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.
Insulated double-skin curtain
Two layers of fabric with an air gap or insulation between them, reducing heat or chill loss at openings between temperature zones or at external docks.
Regulations and approvals in England
Workplace safety in England is regulated by HSE. For a loading bay in Nottingham, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about high-speed dock doors in Nottingham
Can you work outside our normal operating hours in Nottingham?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Which building and safety rules apply to a site in Nottingham?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Nottingham, we check what applies at survey and design to it.
Is VAT included in your guide prices for high-speed dock doors?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Nottinghamshire as everywhere else: for high-speed dock doors, it is £6,500 to £14,500 per door, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
How fast does a high-speed door open?
Many dock and internal high-speed doors open at around 1 to 2 metres per second, so a typical opening clears in a few seconds. Speed depends on the size, the drive and whether the door is built for wind. Closing speed is usually set slower than opening for safety, and both are adjusted at handover.
How often should a high-speed door be serviced?
Service frequency should follow how hard the door works, and a busy high-speed door usually needs more visits than a quiet sectional door. We agree a schedule based on cycles per day, the manufacturer's recommendations and any history of impacts. Every visit should include a check of the light curtain, photocells and bottom edge.
High-speed dock doors near Nottingham
Close neighbours of Nottingham with their own pages here: West Bridgford (2 miles), Arnold (3 miles) and Hucknall (6 miles). Choose one to see coverage details for that town.
Other loading bay services in Nottingham
Full guide to high-speed dock doors · Everything we do in Nottingham
Ready to talk about a loading bay in Nottingham? Call us, or send the details through the quote form.