Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Dock safety · Chichester

Dock traffic lights and interlocks in Chichester

We look after dock traffic lights and interlocks for warehouses and factories in Chichester, planning the work around deliveries and collections so that the dock stays as available as possible.

Guide £650–£3,400 per bay ex VATFree site surveyPO19
Location
Chichester, West Sussex
Main postcode district
PO19
Nearby (straight line)
Bognor Regis (6 miles), Emsworth (7 miles) and Havant (9 miles)
Survey and quote
Free, with a fixed written quote
Dock traffic lights and interlocks, in short

Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.

Where does this fit at a dock in Chichester?

Distribution centres near Chichester taking trailers from many different hauliers benefit from a signal every driver understands, regardless of language or familiarity with the site. If a site in Chichester has had door panels damaged by levellers raised too early, a leveller-to-door interlock is a straightforward fix to consider.

Sites around Chichester that run night shifts often find traffic lights easier for drivers to read than staff waving or knocking on the cab door.

For dock traffic lights and interlocks in Chichester, we begin with a free site survey and a fixed written quote, so you know the scope and cost before committing. We take responsibility for managing the job, and specialist installation engineers carry it out under our supervision. Bays are taken out of use in a planned sequence so the rest of the dock keeps working, and evening or weekend work can be arranged. Each item is tested at handover and the documentation is left with you.

What happens on site when traffic lights and interlocks are fitted?

Fitting lights and interlocks is mainly electrical work, and each bay is out of use while its controls are connected and tested. Working bay by bay keeps the rest of the dock running.

  1. Fix the signals: the outside light is mounted on brackets at a height drivers can see, and the inside light beside the door.
  2. Run the cables: wiring is run in conduit or trunking between lights, sensors and control panels.
  3. Isolate and connect: the door and leveller supplies are isolated and locked off while the interlock wiring is connected, or a new bay panel is fitted.
  4. Test every sequence: each interlock is tested, including what happens if a step is attempted out of order.
  5. Brief staff: dock staff are shown the new sequence, and signs are fitted for drivers.

It helps if you can provide any electrical drawings for the dock, access to the distribution board, a person who can authorise isolations and an agreed order for releasing bays.

How do inside and outside dock traffic lights work together?

Inside and outside dock lights always show opposite colours: when the driver sees red, dock staff see green, and the other way round. Each light is aimed at a different person, so each one only ever gives one instruction.

  • Outside light, facing the driver: red means stay on the bay because loading is in progress; green means the bay is clear to leave or to reverse on to.
  • Inside light, facing dock staff: green means the trailer is in place and it is safe to open the door and load; red means do not open the door or enter the trailer.

Lights can be switched in three main ways:

  1. Manually, by a switch beside the door, relying on dock staff to change it at the right moment.
  2. By door position, so opening the door automatically turns the outside light red.
  3. By the restraint, so the light only changes when the trailer is physically held.
Guide price, Chichester
£650–£3,400 per bay, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • How often each door cycles during a typical shift
  • Wall and steel structure for door, shelter and bumper fixings
  • Scope to convert ground-level doors into docks or add lift tables
  • Condition of any existing leveller pit, kerb angles and pit drainage
  • Forklift and pallet truck loads crossing the leveller platform
  • Working hours, shift patterns and windows for out-of-hours work

Options to discuss

Full bay interlock panel

A single control panel that runs the door, leveller, restraint and shelter in the correct sequence, with indicators showing which step is active or blocked.

Trailer presence sensors

Sensors that detect a trailer on the bay, used to switch lights, enable the door or trigger an inflatable shelter where no restraint is fitted.

Which rules apply in England?

Sites in Chichester fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.

Questions about dock traffic lights and interlocks in Chichester

Which building and safety rules apply to a site in Chichester?

It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Chichester, we check what applies at survey and design to it.

What details do you need from us to quote for dock traffic lights and interlocks?

To get started, send the site address in Chichester, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Is the site survey in Chichester free?

Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.

Will interlocks slow down my loading operation?

Interlocks add a fixed sequence, but each step takes only moments and staff soon get used to it. In practice many sites find the sequence saves time overall, because there are fewer arguments about when to open the door and less damage from levellers being raised into part-open doors.

Which way round do the inside and outside lights work?

The inside and outside lights always show opposite colours. While a trailer is being loaded, the outside light is red so the driver stays put and the inside light is green so staff can work. When loading is finished and the door is closed, the inside light turns red and the outside light turns green for the driver.

Dock traffic lights and interlocks near Chichester

We also cover towns near Chichester, including Bognor Regis (6 miles), Emsworth (7 miles) and Havant (9 miles). Each has its own page with the same services and process.

Other loading bay services in Chichester

Full guide to dock traffic lights and interlocks · Everything we do in Chichester

Call us or request a quote online to talk through loading bay work at your site in Chichester.

Call freeGet a quote