- Location
- Waterlooville, Hampshire
- Main postcode district
- PO7
- Nearby (straight line)
- Havant (3 miles), Emsworth (5 miles) and Portsmouth (6 miles)
- Survey and quote
- Free, with a fixed written quote
Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
What matters for dock traffic lights and interlocks in Waterlooville?
Loading docks in Waterlooville where drivers wait in their cabs for a hand signal can replace guesswork with a clear red and green light at every bay. Whether your unit in Waterlooville has one dock or twenty, the survey looks at each bay's existing controls before we quote a fixed price in writing.
New warehouses in Waterlooville can have lights and interlocks wired in during the electrical fit-out, avoiding retrofit cabling and keeping every bay on one control standard.
Your loading bay stays our responsibility from the survey to the handover. In Waterlooville, the survey and written quote are free, and the quoted price is fixed for the agreed scope. Installation is carried out by specialist engineers working under our management, at times planned with you to protect your loading schedule. Out-of-hours work is available by arrangement. We finish by testing the equipment and handing over its documentation.
How do inside and outside dock traffic lights work together?
Inside and outside dock lights always show opposite colours: when the driver sees red, dock staff see green, and the other way round. Each light is aimed at a different person, so each one only ever gives one instruction.
- Outside light, facing the driver: red means stay on the bay because loading is in progress; green means the bay is clear to leave or to reverse on to.
- Inside light, facing dock staff: green means the trailer is in place and it is safe to open the door and load; red means do not open the door or enter the trailer.
Lights can be switched in three main ways:
- Manually, by a switch beside the door, relying on dock staff to change it at the right moment.
- By door position, so opening the door automatically turns the outside light red.
- By the restraint, so the light only changes when the trailer is physically held.
What happens on site when traffic lights and interlocks are fitted?
Fitting lights and interlocks is mainly electrical work, and each bay is out of use while its controls are connected and tested. Working bay by bay keeps the rest of the dock running.
- Fix the signals: the outside light is mounted on brackets at a height drivers can see, and the inside light beside the door.
- Run the cables: wiring is run in conduit or trunking between lights, sensors and control panels.
- Isolate and connect: the door and leveller supplies are isolated and locked off while the interlock wiring is connected, or a new bay panel is fitted.
- Test every sequence: each interlock is tested, including what happens if a step is attempted out of order.
- Brief staff: dock staff are shown the new sequence, and signs are fitted for drivers.
It helps if you can provide any electrical drawings for the dock, access to the distribution board, a person who can authorise isolations and an agreed order for releasing bays.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- How drivers are prevented from pulling away too early
- Traffic routes for vehicles and separation of pedestrians
- Escape routes and pedestrian doors close to the bay
- Power supply at each bay, including three-phase availability
- Scope to convert ground-level doors into docks or add lift tables
- Asbestos register and any other site hazard information
Options to discuss
Standalone LED traffic lights
A red and green pair for each bay, one outside for the driver and one inside for dock staff, switched manually from a control beside the door.
Door-linked lights
Lights that change automatically with the door position, using a door switch or a signal from the door control panel, so the outside light turns red as the door opens.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Waterlooville. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about dock traffic lights and interlocks in Waterlooville
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Waterlooville site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Can you work alongside our main contractor on a new build in Waterlooville?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Will you deal with building control and planning for a project in Waterlooville?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Do traffic lights and interlocks need maintenance?
Yes. Lights, sensors and interlocks should be checked at each planned service visit, including testing the full sequence and confirming that steps attempted out of order are blocked. As part of the dock equipment they fall under PUWER, which requires work equipment to be maintained in a safe condition.
Will interlocks slow down my loading operation?
Interlocks add a fixed sequence, but each step takes only moments and staff soon get used to it. In practice many sites find the sequence saves time overall, because there are fewer arguments about when to open the door and less damage from levellers being raised into part-open doors.
Dock traffic lights and interlocks near Waterlooville
Nearby places we cover, measured from Waterlooville, include Havant (3 miles), Emsworth (5 miles) and Portsmouth (6 miles). Ask if your own town is missing.
Other loading bay services in Waterlooville
Full guide to dock traffic lights and interlocks · Everything we do in Waterlooville
Have photos of the door, leveller or shelter? Send them with your enquiry and we can give a clearer answer for your Waterlooville site.