- Location
- Camborne, Cornwall
- Main postcode district
- TR14
- Nearby (straight line)
- Redruth (4 miles), Falmouth (11 miles) and Truro (11 miles)
- Survey and quote
- Free, with a fixed written quote
A complete loading bay installation is the supply and fitting of every item a dock needs as one coordinated package: typically an insulated door, a dock leveller, a shelter or seal, bumpers, wheel guides, a dock light and traffic lights or interlocks. One party manages the design, sequence and commissioning, so the parts fit together and work as a single system.
How does this suit sites in Camborne?
Third-party logistics providers in Camborne taking on a new contract may need bays reconfigured quickly, and one coordinated package keeps the programme manageable. Warehouses near Camborne handling mixed trailer types can specify different levellers bay by bay within one package while keeping a common control and maintenance standard.
Every complete bay enquiry in Camborne starts with a site survey and a written quote that sets out exactly what is included and what is priced separately.
Your loading bay stays our responsibility from the survey to the handover. In Camborne, the survey and written quote are free, and the quoted price is fixed for the agreed scope. Installation is carried out by specialist engineers working under our management, at times planned with you to protect your loading schedule. Out-of-hours work is available by arrangement. We finish by testing the equipment and handing over its documentation.
How much does a complete loading bay cost?
A complete loading bay typically costs £13,500 to £26,000 per bay, supplied and installed, excluding VAT. That covers the door, leveller, shelter or seal and core safety items, and assumes a sound structural opening and an existing or separately formed leveller pit.
What moves the price:
- Door type: an insulated sectional door costs less than a high-speed or cold store door.
- Leveller type: telescopic-lip levellers cost more than swing-lip.
- Shelter or seal: inflatable shelters sit at the top of the range.
- Safety package: restraints, traffic lights and interlocks add to the base bay.
- Number of bays: repeat bays on one project lower the cost per bay.
- Programme: phased or out-of-hours working in a live building adds cost.
New pits, pit repairs, concrete and groundworks are priced separately after survey. Following a free site survey, the written quote is the fixed price. VAT is added at the standard rate.
What regulations and standards apply to a new loading bay?
A new loading bay has to meet door safety law, work equipment law and, for the door, energy rules. The main references are:
- Doors: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 (Northern Ireland: the 1993 equivalent). Upward-opening doors need a device to stop them falling back, and powered doors need features to prevent trapping. Doors are made to BS EN 13241, with powered door safety covered by BS EN 12453.
- Levellers: BS EN 1398:2009, the dock leveller safety standard.
- All dock equipment: PUWER 1998, or PUWER (Northern Ireland) 1999, requiring suitable, maintained and inspected work equipment.
- Drive-away: HSE guidance (HSG136) says there should be safeguards against early drive-away, such as traffic lights, restraints or key control.
- Energy: in England, Approved Document L (2021) Volume 2 sets a limiting U-value of 1.3 W/m²K for vehicle access doors. Other nations have their own rules, and we confirm the figure for your project.
Equipment in Great Britain may carry UKCA or CE marking; in Northern Ireland, CE or CE with UKNI.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Dock height and the mix of trailers you load
- Bumper position and wear or damage on the dock face
- Wind exposure at the dock, which affects door and shelter choice
- Whether planning, building control or a building warrant may be needed
- How often each door cycles during a typical shift
- Forklift and pallet truck loads crossing the leveller platform
Options to discuss
Chilled or frozen bay
A well-insulated door, inflatable shelter or foam seal and a leveller suited to low temperatures, specified to keep cold air in and warm, moist air out.
Safety pack add-on
Vehicle restraint, inside and outside traffic lights and interlocks between door, leveller and restraint, added to any bay specification as part of the same package.
Planning, building control and safety law in England
Workplace safety in England is regulated by HSE. For a loading bay in Camborne, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about complete loading bay installations in Camborne
Is VAT included in your guide prices for complete loading bay installations?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Cornwall as everywhere else: for complete loading bay installations, it is £13,500 to £26,000 per bay, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Which building and safety rules apply to a site in Camborne?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Camborne, we check what applies at survey and design to it.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Camborne, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
What paperwork do we receive at handover?
At handover you receive commissioning and test records, operating instructions and the maintenance requirements for each item. Equipment comes with the manufacturer's warranty, and our workmanship terms are those set out in writing in the quote. These records also help with insurer inspections later.
Do you work with main contractors on new builds?
Yes. On new warehouses we work as the specialist dock package contractor to the main contractor's programme. We provide pit, dock face and electrical details early so the groundworks and building envelope are built to suit the equipment, then install and commission each bay.
Complete loading bay installation near Camborne
Sites close to Camborne get the same service, including those in Redruth (4 miles), Falmouth (11 miles) and Truro (11 miles), with every job run the same way.
Other loading bay services in Camborne
Full guide to complete loading bay installations · Everything we do in Camborne
For a written price on loading bay work in Camborne, request a quote and include photos of the bay if you can.