Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Loading bay doors · Camborne

Cold store dock doors in Camborne

Whatever the size of the operation, we can take on cold store dock doors in Camborne, with every job run by us and carried out by specialists we manage directly.

Guide £4,800–£9,500 per door ex VATFree site surveyTR14
Location
Camborne, Cornwall
Main postcode district
TR14
Nearby (straight line)
Redruth (4 miles), Falmouth (11 miles) and Truro (11 miles)
Survey and quote
Free, with a fixed written quote
Cold store dock doors, in short

A cold store dock door is an insulated loading bay door built for chilled or frozen buildings, usually a sectional door with thick insulated panels or a high-speed door with an insulated curtain. It differs from a standard dock door in its thermal breaks, extra seals and, on freezer docks, heating in the frame or seals so that ice cannot lock the door shut or tear the seals.

Why do sites in Camborne choose this?

A chilled distribution centre in Camborne opens its dock doors many times a shift, so the door specification matters far more than at an ambient bay. Any cold store dock survey in Camborne is carried out with the store running, so we can see ice, seals and traffic as they really are.

Converting an ambient unit in Camborne to chilled storage usually means replacing standard dock doors with insulated ones and sealing around the trailers.

For cold store dock doors in Camborne, we begin with a free site survey and a fixed written quote, so you know the scope and cost before committing. We take responsibility for managing the job, and specialist installation engineers carry it out under our supervision. Bays are taken out of use in a planned sequence so the rest of the dock keeps working, and evening or weekend work can be arranged. Each item is tested at handover and the documentation is left with you.

Do cold store dock doors have to meet building regulations?

Yes, a new or replacement cold store dock door is still a vehicle access door, so building energy rules apply alongside workplace safety law and product standards.

  • England: Approved Document L (2021) Volume 2 limits the U-value of vehicle access and similar large doors to 1.3 W/m²K in new and replacement work. Cold store doors are normally specified to perform better than that to protect the store.
  • Wales, Scotland and Northern Ireland: Approved Document L for Wales, Section 6 of the Scottish Building Standards Technical Handbook and Technical Booklet F2 in Northern Ireland apply. We confirm the figure for your nation and project.
  • Power failure: under the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, or the 1993 Northern Ireland regulations, a powered door must be operable by hand where needed for health or safety, unless it opens automatically when power fails.
  • Standards: BS EN 13241 for the door and BS EN 12453 for powered operation.

How should a door be specified for a chilled dock compared with a freezer dock?

A chilled dock needs a well-insulated, well-sealed door, while a freezer dock also needs heating to stop ice forming in the frame and seals. The temperature difference across the door drives most specification choices.

  • Chilled docks: an insulated sectional door at the thicker end of the common 40 to 80 mm panel range, good perimeter seals and a shelter or seal outside usually do the job.
  • Freezer docks: thick panels, thermal breaks in the panel joints, heated side frames and a heated bottom seal, plus a fast operator to cut open time.
  • Doors between zones: an insulated high-speed door often suits openings between a chilled marshalling area and a freezer, where traffic is constant.
  • Vision panels: possible, but they reduce insulation and can mist, so many freezer docks leave them out.

A cold store door is only as good as the seal around the trailer, which is why we specify the door, shelter and leveller together.

Guide price, Camborne
£4,800–£9,500 per door, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What we look at on site

  • Gaps around trailers where heated or chilled air escapes
  • Drainage on recessed or sloping dock approaches
  • Access for deliveries, cranes or lifting equipment during installation
  • Asbestos register and any other site hazard information
  • How often each door cycles during a typical shift
  • Forklift and pallet truck loads crossing the leveller platform

Options to discuss

Heated frames and seals

Low-power heating in the side frames, bottom seal or threshold that keeps contact surfaces above freezing so the door does not ice up or tear its seals.

Insulated high-speed door

A fast door with an insulated curtain for busy openings between temperature zones, where cutting open time matters more than maximum insulation.

Regulations and approvals in England

Sites in Camborne fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.

Questions about cold store dock doors in Camborne

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Camborne, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

Can you work alongside our main contractor on a new build in Camborne?

Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.

What warranty comes with new loading bay equipment?

New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Camborne site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.

What happens to a cold store door in a power cut?

In a power cut the door stops where it is and the frame heating switches off, so it must be possible to operate the door by hand. Powered dock doors normally have a hand chain, crank or release for this. We show your team how to use it at handover so the store can be closed up quickly.

Can a cold store door be paired with a high-speed door?

Yes, cold store docks often pair an insulated sectional door on the outside with a fast door just inside it, or use an insulated high-speed door as the only door between zones. The right arrangement depends on traffic, security and how much space there is around the opening.

Cold store dock doors near Camborne

Distances are measured from Camborne. Nearby towns we cover include Redruth (4 miles), Falmouth (11 miles) and Truro (11 miles), and other towns in the area are covered too.

Other loading bay services in Camborne

Full guide to cold store dock doors · Everything we do in Camborne

Request a quote for your loading bay in Camborne, attaching photos of the dock, the equipment and any damage.

Call freeGet a quote