Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Loading bay doors · Gosport

Cold store dock doors in Gosport

Our approach to cold store dock doors in Gosport matches the way we work across Hampshire: understand the dock first, agree the scope in writing, then manage the job through to a tested handover.

Guide £4,800–£9,500 per door ex VATFree site surveyPO12
Location
Gosport, Hampshire
Main postcode district
PO12
Nearby (straight line)
Portsmouth (2 miles), Fareham (4 miles) and Ryde (5 miles)
Survey and quote
Free, with a fixed written quote
Cold store dock doors, in short

A cold store dock door is an insulated loading bay door built for chilled or frozen buildings, usually a sectional door with thick insulated panels or a high-speed door with an insulated curtain. It differs from a standard dock door in its thermal breaks, extra seals and, on freezer docks, heating in the frame or seals so that ice cannot lock the door shut or tear the seals.

What should sites in Gosport consider?

When an older cold store in Gosport has a door that has been repaired many times, a planned replacement can be timed for a quieter trading period. Food manufacturers in Gosport moving finished product into frozen storage need doors that resist ice and close quickly behind each forklift or trailer movement.

A chilled distribution centre in Gosport opens its dock doors many times a shift, so the door specification matters far more than at an ambient bay.

It starts with a free site survey in Gosport, where we measure the openings, check the dock and talk through how the bay is used. You then receive a fixed written quote. Once you accept, we manage the job: specialist installation engineers carry out the work under our management, planned around your deliveries, and out-of-hours working can be arranged. At handover we test everything with you and leave the documentation.

Why does ice form around a freezer dock door, and how is it stopped?

Ice forms when warm, moist outside air meets the cold surfaces of the door, frame and floor, and the moisture freezes. Over time it builds up in the seals and guides until the door jams or tears its seals.

Ice is controlled by tackling both the cold surfaces and the warm air:

  • Heated frames and seals: low-power heating in the side frames and bottom seal keeps those surfaces above freezing.
  • Threshold heating: stops the door freezing to the floor.
  • A tight seal at the trailer: an inflatable dock shelter or a well-fitted seal keeps outside air away from the opening.
  • Short open times: fast operators and interlocks mean the door is only open while a trailer is sealed to the dock.

Condensation dripping inside the store near the door is an early sign of the same problem and worth raising at survey.

How does a cold store door work with the shelter and leveller?

On a cold store dock the door, shelter and leveller should work as one system, with the door opening only once the trailer is sealed against the building and closing before the seal is released.

A typical sequence is:

  1. The trailer reverses onto the bumpers and is held by a restraint, or the driver's keys are taken.
  2. The shelter inflates or the seal compresses around the trailer.
  3. The door opens and the leveller lip is lowered onto the trailer bed.
  4. Loading takes place inside a sealed link between store and trailer.
  5. The leveller is stored, the door closes, then the shelter releases.

Interlocks make this sequence automatic, so the door cannot be left open with no trailer present. Insulated leveller platforms and seals around the pit also reduce cold loss through the floor of the bay.

Guide price, Gosport
£4,800–£9,500 per door, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What does the free survey cover?

  • Temperature requirements for chilled, frozen or ambient goods
  • Scope to convert ground-level doors into docks or add lift tables
  • Control positions, isolators and any existing interlocks
  • Working hours, shift patterns and windows for out-of-hours work
  • Yard gradient and the slope of the approach to the dock
  • Headroom above the opening and which track type will suit it

Options to discuss

Insulated sectional cold store door

Thick insulated panels with thermal breaks and full perimeter seals, the usual choice for chilled and frozen external dock openings that also need to be secure overnight.

Dock interlocks

Controls that link the door to the shelter, leveller and restraint so the door only opens when a trailer is docked and sealed against the building.

Regulations and approvals in England

Workplace safety in England is regulated by HSE. For a loading bay in Gosport, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about cold store dock doors in Gosport

What details do you need from us to quote for cold store dock doors?

To get started, send the site address in Gosport, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Do you cover Gosport for cold store dock doors?

Yes. We take on cold store dock doors for businesses in Gosport and across Hampshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.

Is the site survey in Gosport free?

Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.

Can a standard sectional door be used on a chilled dock?

A standard insulated sectional door can work on a chilled dock if its panels are thick enough and its seals are in good condition. For frozen docks it is not usually suitable, because it lacks the thermal breaks and frame heating needed to stop ice forming. We advise on the right specification after surveying the store.

Can a cold store door be paired with a high-speed door?

Yes, cold store docks often pair an insulated sectional door on the outside with a fast door just inside it, or use an insulated high-speed door as the only door between zones. The right arrangement depends on traffic, security and how much space there is around the opening.

Cold store dock doors near Gosport

Looking beyond Gosport? Our pages for Portsmouth (2 miles), Fareham (4 miles) and Ryde (5 miles) describe the same loading bay services and how to get in touch.

Other loading bay services in Gosport

Full guide to cold store dock doors · Everything we do in Gosport

Ready to talk about a loading bay in Gosport? Call us, or send the details through the quote form.

Call freeGet a quote