High-speed dock doors in Gosport

Location: Gosport, Hampshire
Main postcode district: PO12
Nearby (straight line): Portsmouth (2 miles), Fareham (4 miles) and Ryde (5 miles)
Survey and quote: Free, with a fixed written quote

High-speed dock doors, in short

A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.

Is this right for your site in Gosport?

Manufacturers around Gosport moving work in progress between production and dispatch can use high-speed doors to stop dust and draughts crossing departments. Where a goods-in area in Gosport borders a chilled zone, a fast fabric door helps hold the temperature line without slowing forklift movements between the two.

A warehouse in Gosport running long shifts with constant forklift traffic puts a lot of cycles through a door, so the drive and its duty rating need to suit.

If you are planning high-speed dock doors for a site in Gosport, expect four stages. A free survey and fixed written quote come first. We then agree a programme with you, including any out-of-hours work. Specialist installation engineers carry out the installation under our management, with us as your single point of contact. Finally, the equipment is tested, your staff are shown how it works and everything is handed over with its documentation.

What does a high-speed dock door cost, and why does the price vary so much?

A high-speed dock door typically costs £6,500 to £14,500 per door, excluding VAT, supply and fit. The range is wide because each door is built to order, and an internal door between two zones is a very different product from one facing an exposed yard.

The main things that move the price are:

Size and wind exposure: large external openings need reinforced curtains, wind bars or belts and heavier side frames.
Curtain type: single-skin fabric costs less than an insulated double-skin curtain.
Self-repair and breakaway features: worth paying for wherever forklifts pass through.
Activation: radar, induction loops or pull cords, and how many control points are needed.
Interlocks: links to an outer door, a leveller or traffic lights.
Site works: power supply, removing an old door or strip curtain, and access equipment.

Our loading bay costs guide sets these figures alongside other dock equipment. After a free site survey you receive a fixed written price.

Should a high-speed door replace our strip curtain or work alongside our dock door?

At very busy openings a high-speed door often replaces a strip curtain, and at external docks it usually works alongside a slower insulated door rather than replacing it.

Strip curtains are inexpensive, but they slow forklifts, scratch quickly and can hide a pedestrian on the other side. A high-speed door clears the opening fully, closes again within seconds and keeps a clear view through its vision panels. See PVC strip curtains if you are weighing up the two.

At external docks, a common arrangement is:

an insulated sectional door on the outside for security and closing at night,
a high-speed door just inside it for daytime traffic,
an interlock so the high-speed door only runs when the outer door is open.

This pairing keeps the building secure out of hours while cutting the time the opening stands open during the working day.

Guide price, Gosport

£6,500–£14,500 per door, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

Working hours, shift patterns and windows for out-of-hours work
Condition of any existing leveller pit, kerb angles and pit drainage
Access for deliveries, cranes or lifting equipment during installation
Control positions, isolators and any existing interlocks
Gaps around trailers where heated or chilled air escapes
Yard gradient and the slope of the approach to the dock

Options to discuss

Wind-reinforced external build

Wind bars, tensioned belts and deeper guides keep the curtain in place at exposed external openings, so the door stays reliable when the yard is windy.

Insulated double-skin curtain

Two layers of fabric with an air gap or insulation between them, reducing heat or chill loss at openings between temperature zones or at external docks.

What do the rules in England mean for the work?

Workplace safety in England is regulated by HSE. For a loading bay in Gosport, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about high-speed dock doors in Gosport

Will you deal with building control and planning for a project in Gosport?

We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Gosport, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

How long does installation take at a site in Gosport?

It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.

How fast does a high-speed door open?

Many dock and internal high-speed doors open at around 1 to 2 metres per second, so a typical opening clears in a few seconds. Speed depends on the size, the drive and whether the door is built for wind. Closing speed is usually set slower than opening for safety, and both are adjusted at handover.

Is a high-speed door secure enough to be the only door at a dock?

Usually not on an external dock. Fabric curtains are designed for speed and draught control rather than security, so most sites keep an insulated sectional door or shutter on the outside for closing at night. Some rigid high-speed designs give more security, and we can discuss them where a single door is needed.

High-speed dock doors near Gosport

Close neighbours of Gosport with their own pages here: Portsmouth (2 miles), Fareham (4 miles) and Ryde (5 miles). Choose one to see coverage details for that town.

Other loading bay services in Gosport

Full guide to high-speed dock doors · Everything we do in Gosport

Have photos of the door, leveller or shelter? Send them with your enquiry and we can give a clearer answer for your Gosport site.