- Location
- Portsmouth, Hampshire
- Main postcode district
- PO5
- Nearby (straight line)
- Gosport (2 miles), Fareham (5 miles) and Ryde (6 miles)
- Survey and quote
- Free, with a fixed written quote
A cold store dock door is an insulated loading bay door built for chilled or frozen buildings, usually a sectional door with thick insulated panels or a high-speed door with an insulated curtain. It differs from a standard dock door in its thermal breaks, extra seals and, on freezer docks, heating in the frame or seals so that ice cannot lock the door shut or tear the seals.
How does this suit sites in Portsmouth?
A chilled distribution centre in Portsmouth opens its dock doors many times a shift, so the door specification matters far more than at an ambient bay. Converting an ambient unit in Portsmouth to chilled storage usually means replacing standard dock doors with insulated ones and sealing around the trailers.
During warm, humid spells, any cold store dock in Portsmouth is most exposed to condensation and ice, which is why heated frames and good shelters are worth considering.
Before anything is ordered, we visit your site in Portsmouth for a free survey and then send a written quote with a fixed price. From that point we manage the installation, coordinating delivery, access and any other trades. Fitting is done by specialist installation engineers engaged and managed by us, at times that suit your operation, including out of hours where agreed. You get a tested installation, a demonstration for your team and the manufacturer documentation.
Operators sending trailers to and from Portsmouth may already know this: Portsmouth International Port handles ferry and freight traffic. Regardless of traffic volume, a dock must seal, level and hold vehicles safely.
Do cold store dock doors have to meet building regulations?
Yes, a new or replacement cold store dock door is still a vehicle access door, so building energy rules apply alongside workplace safety law and product standards.
- England: Approved Document L (2021) Volume 2 limits the U-value of vehicle access and similar large doors to 1.3 W/m²K in new and replacement work. Cold store doors are normally specified to perform better than that to protect the store.
- Wales, Scotland and Northern Ireland: Approved Document L for Wales, Section 6 of the Scottish Building Standards Technical Handbook and Technical Booklet F2 in Northern Ireland apply. We confirm the figure for your nation and project.
- Power failure: under the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, or the 1993 Northern Ireland regulations, a powered door must be operable by hand where needed for health or safety, unless it opens automatically when power fails.
- Standards: BS EN 13241 for the door and BS EN 12453 for powered operation.
How can a cold store door be replaced without losing temperature?
A cold store door can be replaced with very little temperature loss if the work is planned around the store, with the opening screened and the fitting done in one continuous visit.
On a live cold store we usually:
- schedule the work for the quietest period, often overnight or at a weekend,
- fit a temporary insulated screen or strip curtain while the opening is exposed,
- remove ice from the old frame and threshold before fixing the new door,
- pre-assemble as much as possible so the opening is exposed for the shortest time.
From your side we need product moved back from the opening, any site permits for working in cold areas, and power for the operator and frame heaters. Heated frames typically need their own supply, which we set out in the quote. Our cold store loading bays guide covers planning the work in more depth.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Gaps around trailers where heated or chilled air escapes
- Drainage on recessed or sloping dock approaches
- Temperature requirements for chilled, frozen or ambient goods
- Condition of any existing leveller pit, kerb angles and pit drainage
- Wheel guide positions and yard markings for reversing vehicles
- Clear opening width and height for each door
Options to discuss
Dock interlocks
Controls that link the door to the shelter, leveller and restraint so the door only opens when a trailer is docked and sealed against the building.
Insulated high-speed door
A fast door with an insulated curtain for busy openings between temperature zones, where cutting open time matters more than maximum insulation.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Portsmouth. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about cold store dock doors in Portsmouth
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Portsmouth, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Do you cover Portsmouth for cold store dock doors?
Yes. We take on cold store dock doors for businesses in Portsmouth and across Hampshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
Which building and safety rules apply to a site in Portsmouth?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Portsmouth, we check what applies at survey and design to it.
Will a new door reduce our refrigeration load?
A better-sealed, better-insulated door that stays shut except when a trailer is docked reduces the warm air entering the store, which is a significant source of load at a cold store dock. We cannot promise a figure, because results depend on your store, traffic and the rest of the dock, but the mechanism is well understood.
Can a standard sectional door be used on a chilled dock?
A standard insulated sectional door can work on a chilled dock if its panels are thick enough and its seals are in good condition. For frozen docks it is not usually suitable, because it lacks the thermal breaks and frame heating needed to stop ice forming. We advise on the right specification after surveying the store.
Cold store dock doors near Portsmouth
Looking beyond Portsmouth? Our pages for Gosport (2 miles), Fareham (5 miles) and Ryde (6 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Portsmouth
Full guide to cold store dock doors · Everything we do in Portsmouth
Use the quote tool to tell us about the doors, levellers or shelters at your Portsmouth site, and we will be in touch to arrange the next step.