Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Dock safety · Lancing

Vehicle restraints in Lancing

Businesses in Lancing and the rest of West Sussex can come to us for vehicle restraints, with one point of contact who stays with the job from first enquiry to sign-off.

Guide £4,200–£9,800 per bay ex VATFree site surveyBN15, BN43
Book a free survey0800 088 6248
Location
Lancing, West Sussex
Main postcode districts
BN15 and BN43
Nearby (straight line)
Shoreham-by-Sea (2 miles), Worthing (2 miles) and Portslade (5 miles)
Survey and quote
Free, with a fixed written quote
Vehicle restraints, in short

A vehicle restraint is a device at a loading bay that physically holds a trailer against the dock until it is safe to leave. In the UK most systems act on the rear wheel, either as a powered wheel-based restraint or a sensor wheel chock. Restraints guard against early drive-away and trailer creep, and are usually interlocked with the door and dock traffic lights.

What matters for vehicle restraints in Lancing?

Multi-tenant logistics parks around Lancing can benefit from restraints when several tenants share yard space and trailers from different fleets arrive throughout the day. Restraint systems for sites in Lancing are surveyed, quoted and installed in the same way as anywhere else in the UK, with a fixed price set out in writing.

Operators in Lancing reviewing their workplace transport risk assessment often look at restraints when key control alone has proved hard to enforce across shifts.

For vehicle restraints in Lancing, we begin with a free site survey and a fixed written quote, so you know the scope and cost before committing. We take responsibility for managing the job, and specialist installation engineers carry it out under our supervision. Bays are taken out of use in a planned sequence so the rest of the dock keeps working, and evening or weekend work can be arranged. Each item is tested at handover and the documentation is left with you.

How does a vehicle restraint work with dock lights and interlocks?

A vehicle restraint is normally linked to the dock traffic lights and the door controls, so engaging the restraint is what allows loading to start.

A typical sequence looks like this:

  1. The trailer reverses on to the bay with the outside light on green and the door closed.
  2. The restraint engages the rear wheel. The outside light turns red for the driver and the inside light turns green for dock staff.
  3. The door can now be opened, and the leveller can only operate once the door is fully open.
  4. When loading is finished, the leveller is parked and the door closed before the restraint can release.
  5. The restraint releases, the outside light turns green and the driver can leave.

The exact interlocks depend on your equipment and risk assessment. See dock traffic lights and interlocks for the options on signals and control logic.

What happens on site when a vehicle restraint is installed?

Installing a vehicle restraint takes the bay out of use while the rail or chock station is fixed, cabled and tested, but neighbouring bays can usually keep working.

  1. Set out: the restraint position is marked in line with the bay so it meets the rear wheels of the trailers you receive.
  2. Fixing: rail-mounted units are anchored into the concrete apron. If a new concrete base is needed, it must cure before the restraint is fitted.
  3. Cabling: ducts are cut or laid from the restraint to the dock wall, and the control box is fitted inside next to the door.
  4. Connection: the restraint is wired into the door, leveller and traffic light controls so the sequence works as designed.
  5. Commissioning: the system is tested with a trailer on the bay, and dock staff are shown how to engage and release it.

We ask you to release the bay for the agreed period, confirm an electrical supply point, provide a trailer for commissioning and tell us about any buried services in the yard.

Guide price, Lancing
£4,200–£9,800 per bay, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • Condition of any existing leveller pit, kerb angles and pit drainage
  • Asbestos register and any other site hazard information
  • Drainage on recessed or sloping dock approaches
  • Gaps around trailers where heated or chilled air escapes
  • Traffic routes for vehicles and separation of pedestrians
  • Temperature requirements for chilled, frozen or ambient goods

Options to discuss

Hook restraint

A dock-mounted hook that catches the trailer's rear impact guard. Only suitable where your fleet has compatible rear guards, which we check carefully at survey.

Sensor wheel chock

A heavy-duty chock with a sensor or parking station that tells the dock controls when it is in place. Minimal groundwork and suited to retrofit on existing bays.

What do the rules in England mean for the work?

Workplace safety in England is regulated by HSE. For a loading bay in Lancing, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about vehicle restraints in Lancing

How long does installation take at a site in Lancing?

It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.

How do you price vehicle restraints for a site in Lancing?

Guide budgets for supply and fit are £4,200 to £9,800 per bay, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.

Which building and safety rules apply to a site in Lancing?

It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Lancing, we check what applies at survey and design to it.

Do vehicle restraints need servicing?

Yes. A restraint is work equipment under PUWER, so it must be maintained in a safe condition and inspected where wear could lead to danger. Servicing typically covers the rail and arm, sensors, controls and the interlock sequence with the door and lights.

Do vehicle restraints work with all trailers?

Wheel-based restraints and sensor chocks work with most trailers, because they act on the rear wheel rather than on the back of the vehicle. Vehicles with unusual wheel positions or very small wheels need checking, so we look at the vehicles you receive during the survey.

Vehicle restraints near Lancing

Businesses outside Lancing may find their nearest town in this list: Shoreham-by-Sea (2 miles), Worthing (2 miles) and Portslade (5 miles). Each page covers doors, docks, repairs and servicing.

Other loading bay services in Lancing

Full guide to vehicle restraints · Everything we do in Lancing

Get in touch about loading bay doors and dock equipment in Lancing: call, email or use the quote tool.

Call freeGet a quote