Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Dock levellers · Yeadon

Telescopic-lip dock levellers in Yeadon

In Yeadon, as in other parts of West Yorkshire, we offer telescopic-lip dock levellers with clear communication, careful planning and work organised around your operation.

Guide £6,800–£11,800 per leveller ex VATFree site surveyLS19
Location
Yeadon, West Yorkshire
Main postcode district
LS19
Nearby (straight line)
Guiseley (1 mile), Horsforth (3 miles) and Shipley (4 miles)
Survey and quote
Free, with a fixed written quote
Telescopic-lip dock levellers, in short

A telescopic-lip dock leveller is a hydraulic pit leveller whose front lip slides forward out of the platform, rather than swinging on a hinge, and can be extended by a controlled amount onto the trailer bed. Telescopic lips commonly extend 500 to 1,000 mm, which lets operators reach over tail lifts, place the lip between pallets and load the last row in a trailer.

Where does this fit at a dock in Yeadon?

Manufacturing sites in Yeadon that end-load finished goods can place the lip precisely between pallets to reach the rear row. Before recommending a lip extension for a dock in Yeadon, we record the trailers that actually arrive, including tail lifts and rear overhangs.

Parcel and courier hubs in Yeadon with varied vehicle types can use the longer lip reach to serve more of their fleet from fewer bays.

Here is what happens after you contact us about a site in Yeadon. We arrange a free survey, measure up and send a fixed written quote. If you go ahead, we manage the whole job, including ordering, delivery and coordination with your site team. Specialist installation engineers working under our management do the fitting, at times built around your loading schedule, with out-of-hours work by arrangement. Testing and handover documents close the job.

Why does a telescopic-lip leveller cost more than a swing-lip unit?

A telescopic-lip dock leveller typically costs £6,800 to £11,800 per leveller, excluding VAT, supply and fit, assuming an existing, sound pit. It costs more than a swing-lip unit because the lip slides in its own guides inside the platform, which means more steel, a longer lip and more involved hydraulics and controls.

Within the range, the price depends on:

  • Lip extension: a longer reach needs a longer lip and stronger guides.
  • Platform length and width: longer platforms give gentler gradients across mixed trailer heights.
  • Capacity: higher ratings for heavy loads or large forklifts.
  • Insulation: insulated platforms and pit seals for chilled and frozen docks.
  • Controls: automatic return, interlocks and links to restraints and traffic lights.

New pits, pit repairs and groundworks are priced separately after survey, and the written quote is the fixed price. We often quote both lip types side by side, so you can see whether the extra flexibility justifies the cost on each bay.

Can a telescopic leveller replace a swing-lip unit in the same pit?

Often yes, a telescopic-lip leveller can replace a swing-lip unit in the same pit, provided the pit is square and deep enough and the edge steel is in good condition. Some telescopic units need a little more depth for the lip mechanism, so we measure carefully at survey.

A typical installation:

  1. The bay is closed and the old leveller isolated, lifted out and removed.
  2. The pit is cleaned and measured, and any edge steel repairs carried out.
  3. The new unit is set in, levelled and fixed to the pit steel.
  4. The power pack, control panel and lip controls are connected and interlocks wired.
  5. The platform and lip are tested through their full travel.

You will need to provide a clear bay, access for lifting equipment and a suitable power supply, typically three-phase. Installation commonly takes one to two working days per bay once the pit is ready.

Guide price, Yeadon
£6,800–£11,800 per leveller, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • Condition of any existing leveller pit, kerb angles and pit drainage
  • How drivers are prevented from pulling away too early
  • How often each door cycles during a typical shift
  • Yard gradient and the slope of the approach to the dock
  • Headroom above the opening and which track type will suit it
  • Wheel guide positions and yard markings for reversing vehicles

Options to discuss

Automatic return control

A single button that withdraws the lip and lowers the platform to its stored position, reducing the risk of a trailer leaving with the lip still out.

Insulated cold store version

An insulated platform with perimeter seals for chilled and frozen docks, often paired with an inflatable shelter and an insulated dock door.

Planning, building control and safety law in England

Workplace safety in England is regulated by HSE. For a loading bay in Yeadon, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about telescopic-lip dock levellers in Yeadon

Will you deal with building control and planning for a project in Yeadon?

We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Yeadon, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

What details do you need from us to quote for telescopic-lip dock levellers?

To get started, send the site address in Yeadon, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Are telescopic levellers suitable for cold stores?

Yes, telescopic levellers are widely used in cold stores because refrigerated trailers are often loaded right to the rear doors. Insulated platforms and perimeter seals reduce cold loss through the pit, and the leveller is usually interlocked with the door and shelter.

Can telescopic and swing-lip levellers be mixed on one dock?

Yes, and many sites do. Fitting telescopic levellers on the bays that receive tail-lift vehicles or need end loading, and swing-lip units on the rest, keeps costs down while covering every vehicle type. Clear bay signage helps drivers reverse onto the right one.

Telescopic-lip dock levellers near Yeadon

Distances are measured from Yeadon. Nearby towns we cover include Guiseley (1 mile), Horsforth (3 miles) and Shipley (4 miles), and other towns in the area are covered too.

Other loading bay services in Yeadon

Full guide to telescopic-lip dock levellers · Everything we do in Yeadon

Request a quote for your loading bay in Yeadon, attaching photos of the dock, the equipment and any damage.

Call freeGet a quote