- Location
- Clevedon, Somerset
- Main postcode district
- BS21
- Nearby (straight line)
- Nailsea (4 miles), Portishead (5 miles) and Avonmouth (8 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Where does this fit at a dock in Clevedon?
Docks facing open ground in Clevedon can catch rain driven sideways into the bay, which a well-fitted retractable shelter helps keep out. Industrial landlords in Clevedon refreshing a multi-let estate can fit shelters that suit a range of future tenants and the trailers they may use.
Shelter sizing for a bay in Clevedon starts with measuring the door and wall and recording the tallest, lowest and widest trailers you receive.
We do not give a fixed price without seeing the site. A free survey in Clevedon lets us check the details that affect the job, and the written quote that follows is a fixed price for the agreed scope. We plan the work around your operation, arrange out-of-hours access if you need it and manage specialist installation engineers throughout. Handover includes testing, a demonstration and the paperwork you need for your records.
How much does a retractable dock shelter cost?
A retractable dock shelter typically costs £1,900 to £4,400 per shelter, excluding VAT, supply and fit. Most of the variation comes from size, projection and the curtain specification.
- Size: width and height, set by your door and the largest trailers you receive.
- Projection: deeper shelters cost more but leave room for opened trailer doors and the leveller lip.
- Curtains: heavier-grade fabrics, slit side curtains, adjustable top curtains and guide stripes.
- Frame: sprung, pantograph or rigid, in a galvanised or painted finish.
- Fixings: fixing to cladding usually needs a steel subframe or spreader plates.
- Access and removal: powered access equipment in the yard, and taking down an old shelter.
On an older shelter with a sound frame, new curtains may be all that is needed, and we will say so if that is the case. Every price is fixed in the written quote after a free site survey.
What regulations and permissions apply to a dock shelter?
A dock shelter is work equipment, so it must be suitable and kept in a safe condition, and on some projects planning, building control or landlord consent also needs checking. What applies depends on the nation and the scope of work.
- Equipment duties: PUWER 1998 in Great Britain, and PUWER (Northern Ireland) 1999, require shelters, like other dock equipment, to be suitable, maintained and inspected where deterioration could lead to danger. A damaged frame or loose curtain can strike a driver or vehicle.
- Regulator: HSE in Great Britain and HSENI in Northern Ireland.
- Planning: external structures such as loading houses, canopies or new dock approaches can need planning permission. If a shelter is part of wider external works, we check this at survey.
- Building control: forming a new opening for a door and shelter may need Building Regulations approval in England and Wales, a building warrant in Scotland or building control approval in Northern Ireland.
- Your lease: landlords often require consent for fixings to the building.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Age and condition of the equipment already in place
- Drainage on recessed or sloping dock approaches
- Whether planning, building control or a building warrant may be needed
- Wind exposure at the dock, which affects door and shelter choice
- Control positions, isolators and any existing interlocks
- Clear opening width and height for each door
Options to discuss
Guide stripes
Contrasting high-visibility stripes on the curtains that give drivers a clear target to aim for when reversing onto the bay.
Slit side curtains
Vertical cuts in the side curtains that let them wrap around trailer door hinges and rear fittings without tearing, extending curtain life.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Clevedon. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about retractable dock shelters in Clevedon
Can you work alongside our main contractor on a new build in Clevedon?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Do you cover Clevedon for retractable dock shelters?
Yes. We take on retractable dock shelters for businesses in Clevedon and across Somerset. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Clevedon, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Does a dock shelter keep a building warm?
A shelter reduces the draughts and rain entering the dock around a trailer, which helps keep the loading area warmer. It does not seal as closely as a dock seal or inflatable shelter, so for chilled and frozen docks those options are usually preferred.
What projection should a dock shelter have?
Projection should be deep enough to clear opened trailer doors and hinges and to suit the leveller lip and bumpers. Shelters are commonly made with projections from around 500 to 1,000 mm, and we recommend a depth once we know your trailers and leveller.
Retractable dock shelters near Clevedon
Close neighbours of Clevedon with their own pages here: Nailsea (4 miles), Portishead (5 miles) and Avonmouth (8 miles). Choose one to see coverage details for that town.
Other loading bay services in Clevedon
Full guide to retractable dock shelters · Everything we do in Clevedon
Request a quote for your loading bay in Clevedon, attaching photos of the dock, the equipment and any damage.