A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Why do sites in Oxfordshire choose this?
If a shelter on an older unit in Oxfordshire has a sound frame but torn, faded curtains, replacing just the curtains can be the economical choice. Industrial landlords in Oxfordshire refreshing a multi-let estate can fit shelters that suit a range of future tenants and the trailers they may use.
Shelter sizing for a bay in Oxfordshire starts with measuring the door and wall and recording the tallest, lowest and widest trailers you receive.
Before anything is ordered, we visit your site in Oxfordshire for a free survey and then send a written quote with a fixed price. From that point we manage the installation, coordinating delivery, access and any other trades. Fitting is done by specialist installation engineers engaged and managed by us, at times that suit your operation, including out of hours where agreed. You get a tested installation, a demonstration for your team and the manufacturer documentation.
How much does a retractable dock shelter cost?
A retractable dock shelter typically costs £1,900 to £4,400 per shelter, excluding VAT, supply and fit. Most of the variation comes from size, projection and the curtain specification.
- Size: width and height, set by your door and the largest trailers you receive.
- Projection: deeper shelters cost more but leave room for opened trailer doors and the leveller lip.
- Curtains: heavier-grade fabrics, slit side curtains, adjustable top curtains and guide stripes.
- Frame: sprung, pantograph or rigid, in a galvanised or painted finish.
- Fixings: fixing to cladding usually needs a steel subframe or spreader plates.
- Access and removal: powered access equipment in the yard, and taking down an old shelter.
On an older shelter with a sound frame, new curtains may be all that is needed, and we will say so if that is the case. Every price is fixed in the written quote after a free site survey.
How do I size a retractable shelter for my trailers?
Size a retractable shelter to the largest trailer you receive, with a projection deep enough for opened trailer doors and the leveller lip, and curtains that still reach the smallest vehicles. The trailer mix sets almost every dimension.
- Width: wider than the trailer, so the side curtains drape along its sides rather than across the opening.
- Height: high enough for the tallest trailers, with a top curtain deep enough to reach the roof of the lowest.
- Projection: deep enough for the rear doors, folded back along the trailer sides, to sit inside the curtains.
- Curtain cut-outs: vertical slits let the side curtains wrap around hinges and rear fittings without tearing.
- Guide stripes: contrasting stripes on the curtains help drivers centre the trailer.
If your fleet is uniform, a seal may give a tighter fit. Our guide to shelters and seals sets out the trade-offs.
Towns we cover in Oxfordshire
Below is a list of towns in Oxfordshire for retractable dock shelters. Each page explains our approach for sites in that town.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Regulations and approvals in England
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Oxfordshire. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions
What details do you need from us to quote for retractable dock shelters?
To get started, send the site address in Oxfordshire, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Oxfordshire site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Can a shelter be fixed to a cladded wall?
Yes, but cladding on its own is not usually strong enough to carry a shelter. We fix through to the building's steel frame behind the cladding, or use a steel subframe or spreader plates to spread the load, and confirm the method after inspecting the wall.
Does a dock shelter keep a building warm?
A shelter reduces the draughts and rain entering the dock around a trailer, which helps keep the loading area warmer. It does not seal as closely as a dock seal or inflatable shelter, so for chilled and frozen docks those options are usually preferred.
Other services in Oxfordshire
Full guide to retractable dock shelters · All loading bay services in Oxfordshire