A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Is this right for your site in Lincolnshire?
Docks facing open ground in Lincolnshire can catch rain driven sideways into the bay, which a well-fitted retractable shelter helps keep out. Retail and e-commerce distribution centres in Lincolnshire with high trailer turnover need tough sprung-frame shelters that recover quickly after each departure.
Third-party logistics sites in Lincolnshire receiving trailers from many hauliers usually need a shelter rather than a seal, because widths and heights vary.
Here is what happens after you contact us about a site in Lincolnshire. We arrange a free survey, measure up and send a fixed written quote. If you go ahead, we manage the whole job, including ordering, delivery and coordination with your site team. Specialist installation engineers working under our management do the fitting, at times built around your loading schedule, with out-of-hours work by arrangement. Testing and handover documents close the job.
How can I stop dock shelter curtains being torn?
Most curtain damage comes from trailers reversing in off-centre or too far, so better guidance for drivers and correctly set bumpers prevent most tears. Worn curtains can then be replaced individually without changing the frame.
- Wheel guides: steel guides on the approach steer the trailer into the centre of the bay.
- Guide stripes and lights: high-visibility stripes on the curtains and dock lights help drivers line up.
- Bumpers: worn bumpers let trailers push too far into the shelter and strain the frame.
- Frame springs: weak springs leave the frame unable to retract and recover.
- Curtain grade: heavier fabric and reinforced edges last longer at busy docks.
Checking curtains, frame and fixings at each planned service picks up damage early, before a loose curtain starts flapping in the wind and tears completely.
How is a retractable dock shelter installed?
A retractable shelter is fixed to the outside face of the building around the dock door, working from powered access equipment in the yard. A single shelter usually takes a few hours to a day, depending on its size and the wall it fixes to.
- The wall is checked for fixing points; on cladding, a steel subframe or spreader plates are often needed.
- The frame is fixed and set level, centred on the door and leveller.
- Top and side curtains are hung and trimmed to meet the trailers you receive.
- Bumpers are checked, since they set how far the trailer pushes into the shelter.
- The shelter is tested with a trailer reversing in where possible.
You will need to keep the yard area in front of the bay clear for access equipment and take the bay out of use during fitting. No power supply is needed, and neighbouring bays can keep working while each shelter goes up.
Towns we cover in Lincolnshire
Find your town in the list below for details of retractable dock shelters across Lincolnshire, or contact us if your location is not shown.
- Lincoln
- Grimsby
- Scunthorpe
- Boston
- Grantham
- Cleethorpes
- Spalding
- Skegness
- Stamford
- Gainsborough
- Louth
- Sleaford
- Immingham
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Which rules apply in England?
Sites in Lincolnshire fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions
Which building and safety rules apply to a site in Lincolnshire?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Lincolnshire, we check what applies at survey and design to it.
Can you work outside our normal operating hours in Lincolnshire?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
What projection should a dock shelter have?
Projection should be deep enough to clear opened trailer doors and hinges and to suit the leveller lip and bumpers. Shelters are commonly made with projections from around 500 to 1,000 mm, and we recommend a depth once we know your trailers and leveller.
Can I replace just the curtains on an old shelter?
Yes, if the frame and fixings are sound, new top and side curtains can be fitted to an existing shelter, which is often the most economical way to restore it. The frame and springs are checked first, because new curtains on a failing frame will not last. This is handled as a repair, with the visit price agreed beforehand.
Other services in Lincolnshire
Full guide to retractable dock shelters · All loading bay services in Lincolnshire