- Location
- Biggleswade, Bedfordshire
- Main postcode district
- SG18
- Nearby (straight line)
- Letchworth Garden City (8 miles), St Neots (9 miles) and Bedford (9 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
How does this suit sites in Biggleswade?
Industrial landlords in Biggleswade refreshing a multi-let estate can fit shelters that suit a range of future tenants and the trailers they may use. Docks facing open ground in Biggleswade can catch rain driven sideways into the bay, which a well-fitted retractable shelter helps keep out.
Shelter sizing for a bay in Biggleswade starts with measuring the door and wall and recording the tallest, lowest and widest trailers you receive.
We keep the process simple for sites in Biggleswade. A free survey tells us what the dock needs; a fixed written quote tells you what it will cost and what is included. We then organise the installation, with specialist engineers under our management and a programme agreed around your shifts. Night and weekend work is available by arrangement. Before we leave, the new equipment is tested, demonstrated and handed over with its documentation.
How do I size a retractable shelter for my trailers?
Size a retractable shelter to the largest trailer you receive, with a projection deep enough for opened trailer doors and the leveller lip, and curtains that still reach the smallest vehicles. The trailer mix sets almost every dimension.
- Width: wider than the trailer, so the side curtains drape along its sides rather than across the opening.
- Height: high enough for the tallest trailers, with a top curtain deep enough to reach the roof of the lowest.
- Projection: deep enough for the rear doors, folded back along the trailer sides, to sit inside the curtains.
- Curtain cut-outs: vertical slits let the side curtains wrap around hinges and rear fittings without tearing.
- Guide stripes: contrasting stripes on the curtains help drivers centre the trailer.
If your fleet is uniform, a seal may give a tighter fit. Our guide to shelters and seals sets out the trade-offs.
What regulations and permissions apply to a dock shelter?
A dock shelter is work equipment, so it must be suitable and kept in a safe condition, and on some projects planning, building control or landlord consent also needs checking. What applies depends on the nation and the scope of work.
- Equipment duties: PUWER 1998 in Great Britain, and PUWER (Northern Ireland) 1999, require shelters, like other dock equipment, to be suitable, maintained and inspected where deterioration could lead to danger. A damaged frame or loose curtain can strike a driver or vehicle.
- Regulator: HSE in Great Britain and HSENI in Northern Ireland.
- Planning: external structures such as loading houses, canopies or new dock approaches can need planning permission. If a shelter is part of wider external works, we check this at survey.
- Building control: forming a new opening for a door and shelter may need Building Regulations approval in England and Wales, a building warrant in Scotland or building control approval in Northern Ireland.
- Your lease: landlords often require consent for fixings to the building.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Asbestos register and any other site hazard information
- Wheel guide positions and yard markings for reversing vehicles
- Headroom above the opening and which track type will suit it
- Control positions, isolators and any existing interlocks
- Wall and steel structure for door, shelter and bumper fixings
- Clear opening width and height for each door
Options to discuss
Slit side curtains
Vertical cuts in the side curtains that let them wrap around trailer door hinges and rear fittings without tearing, extending curtain life.
Rigid frame with long curtains
A fixed frame carrying long flexible curtains, useful where the trailer only needs to touch the curtains and the frame can stay clear of impact.
Planning, building control and safety law in England
Sites in Biggleswade fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about retractable dock shelters in Biggleswade
Can you work outside our normal operating hours in Biggleswade?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Is the site survey in Biggleswade free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Biggleswade, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can I replace just the curtains on an old shelter?
Yes, if the frame and fixings are sound, new top and side curtains can be fitted to an existing shelter, which is often the most economical way to restore it. The frame and springs are checked first, because new curtains on a failing frame will not last. This is handled as a repair, with the visit price agreed beforehand.
What projection should a dock shelter have?
Projection should be deep enough to clear opened trailer doors and hinges and to suit the leveller lip and bumpers. Shelters are commonly made with projections from around 500 to 1,000 mm, and we recommend a depth once we know your trailers and leveller.
Retractable dock shelters near Biggleswade
Looking beyond Biggleswade? Our pages for Letchworth Garden City (8 miles), St Neots (9 miles) and Bedford (9 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Biggleswade
Full guide to retractable dock shelters · Everything we do in Biggleswade
Whether it is a new bay or a fault on an existing one, call us or request a quote for your site in Biggleswade.