A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
What should sites in North Yorkshire consider?
Wind-driven rain and leaves blowing into an open dock are a familiar nuisance, and a heavy-duty strip curtain is one simple response for sites in North Yorkshire. Chilled rooms off a dock in North Yorkshire can lose temperature through internal doorways, and a low-temperature strip curtain is a quick, inexpensive fix.
Food and packaging businesses in North Yorkshire can choose strip grades suited to regular cleaning, helping to separate dispatch areas from production.
Your loading bay stays our responsibility from the survey to the handover. In North Yorkshire, the survey and written quote are free, and the quoted price is fixed for the agreed scope. Installation is carried out by specialist engineers working under our management, at times planned with you to protect your loading schedule. Out-of-hours work is available by arrangement. We finish by testing the equipment and handing over its documentation.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
Which strip width, thickness and grade should I choose?
Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.
- Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
- Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
- Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
- Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
- Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
- Specialist grades: anti-static, tinted or opaque, or welding grade for screening.
Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.
Towns we cover in North Yorkshire
Below is a list of towns in North Yorkshire for PVC strip curtains. Each page explains our approach for sites in that town.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Which rules apply in England?
Sites in North Yorkshire fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in North Yorkshire, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
How long does installation take at a site in North Yorkshire?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
How do I clean PVC strip curtains?
Clean strips with warm water and a mild detergent, then wipe them dry. Avoid solvents and abrasive pads, which damage the surface and make strips cloud faster. In food areas, follow your site's hygiene schedule and choose a grade suited to regular cleaning.
Can strips be replaced individually?
Yes, individual strips can be unhooked or unclamped and replaced without taking down the whole curtain. Keeping a few spare strips on site lets your team swap damaged ones as soon as they appear, which keeps visibility and sealing consistent across the opening.
Other services in North Yorkshire
Full guide to PVC strip curtains · All loading bay services in North Yorkshire