Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Loading bay doors · Canterbury

PVC strip curtains in Canterbury

When you need PVC strip curtains in Canterbury or anywhere else in Kent, we organise the job end to end and keep disruption to your loading operation as low as we can.

Guide £180–£1,100 per opening ex VATFree site surveyCT1
Location
Canterbury, Kent
Main postcode district
CT1
Nearby (straight line)
Whitstable (6 miles), Herne Bay (7 miles) and Faversham (9 miles)
Survey and quote
Free, with a fixed written quote
PVC strip curtains, in short

A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.

Why do sites in Canterbury choose this?

Where strips at a site in Canterbury have turned cloudy and scratched, replacing them restores visibility for drivers and pedestrians sharing the opening. Measuring an opening in Canterbury for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time.

Wind-driven rain and leaves blowing into an open dock are a familiar nuisance, and a heavy-duty strip curtain is one simple response for sites in Canterbury.

A single contact at Loading Bay Doors handles your project in Canterbury from start to finish. The free site survey and fixed written quote come first, with no obligation to proceed. We then book the installation for times that suit the operation, including out of hours by arrangement, and manage the specialist engineers on site. At the end we commission and test the equipment, walk your team through it and provide the documentation.

Are strip curtains safe where forklifts and pedestrians share an opening?

Strip curtains can be used where forklifts and pedestrians share an opening, but only if the strips stay clear enough for both to see through and the route is managed. Visibility is the main risk.

  • Clear strips scratch and cloud with use, so a driver may not see a person on the other side.
  • Ribbed strips and regular replacement keep visibility better for longer.
  • A separate pedestrian door beside the vehicle opening is the safer arrangement.
  • Floor markings and mirrors help where a separate door is not possible.

At very busy openings, a high-speed dock door with vision panels and safety sensors may be the better long-term answer, because it opens fully for each vehicle and closes again behind it. We can price both so you can compare the cost and the practical difference for your traffic.

Which strip width, thickness and grade should I choose?

Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.

  • Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
  • Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
  • Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
  • Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
  • Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
  • Specialist grades: anti-static, tinted or opaque, or welding grade for screening.

Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.

Guide price, Canterbury
£180–£1,100 per opening, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What does the free survey cover?

  • Dock height and the mix of trailers you load
  • Condition of any existing leveller pit, kerb angles and pit drainage
  • Lighting inside trailers and at the dock face
  • Forklift and pallet truck loads crossing the leveller platform
  • Temperature requirements for chilled, frozen or ambient goods
  • Asbestos register and any other site hazard information

Options to discuss

Low-temperature strips

A grade formulated to stay flexible in chillers and freezers, where standard strips would stiffen, crack and stop falling back into place.

Ribbed strips

Strips with raised ribs that take the abrasion from forklifts and pallets, helping them stay clearer for longer at busy openings.

What do the rules in England mean for the work?

Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Canterbury. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.

Questions about PVC strip curtains in Canterbury

What warranty comes with new loading bay equipment?

New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Canterbury site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.

What details do you need from us to quote for PVC strip curtains?

To get started, send the site address in Canterbury, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Is VAT included in your guide prices for PVC strip curtains?

No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Kent as everywhere else: for PVC strip curtains, it is £180 to £1,100 per opening, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.

Should the strips touch the floor?

Strips usually stop just above the floor so they do not drag, wear or catch on pallet trucks. Where draughts or pests are a concern they can be set closer to the floor, and we agree the finished height with you before fitting so it suits the traffic through the opening.

Are strip curtains a good alternative to a high-speed door?

Strip curtains are a good low-cost option for moderate traffic, but at very busy openings a high-speed door often performs better because it clears fully for each vehicle and closes behind it. The right choice depends on traffic volume, visibility needs and budget.

PVC strip curtains near Canterbury

Sites close to Canterbury get the same service, including those in Whitstable (6 miles), Herne Bay (7 miles) and Faversham (9 miles), with every job run the same way.

Other loading bay services in Canterbury

Full guide to PVC strip curtains · Everything we do in Canterbury

Get in touch about loading bay doors and dock equipment in Canterbury: call, email or use the quote tool.

Call freeGet a quote