A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
How does this suit sites in Kent?
In a warehouse in Kent where doors stay open for much of the shift, strip curtains offer a practical first step before considering a high-speed door. Wind-driven rain and leaves blowing into an open dock are a familiar nuisance, and a heavy-duty strip curtain is one simple response for sites in Kent.
Where strips at a site in Kent have turned cloudy and scratched, replacing them restores visibility for drivers and pedestrians sharing the opening.
We never ask you to commit before you have a fixed price. A free survey at your Kent site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
Which strip width, thickness and grade should I choose?
Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.
- Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
- Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
- Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
- Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
- Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
- Specialist grades: anti-static, tinted or opaque, or welding grade for screening.
Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.
Towns we cover in Kent
We take enquiries about PVC strip curtains from across Kent. These are the towns with their own pages:
- Maidstone
- Gillingham
- Chatham
- Royal Tunbridge Wells
- Folkestone
- Margate
- Ashford
- Canterbury
- Sittingbourne
- Gravesend
- Dartford
- Ramsgate
- Dover
- Tonbridge
- Strood
- Whitstable
- Deal
- Sevenoaks
- Rochester
- Herne Bay
- Broadstairs
- Faversham
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
What do the rules in England mean for the work?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Kent. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Kent, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can you work outside our normal operating hours in Kent?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Should the strips touch the floor?
Strips usually stop just above the floor so they do not drag, wear or catch on pallet trucks. Where draughts or pests are a concern they can be set closer to the floor, and we agree the finished height with you before fitting so it suits the traffic through the opening.
Which grade should we use in a freezer?
Use a low-temperature or polar grade in a freezer. Standard PVC stiffens in the cold, so it cracks and stops falling back into place, leaving gaps. Low-temperature grades are formulated to stay flexible in chilled and frozen conditions, so they keep sealing after each vehicle passes.
Other services in Kent
Full guide to PVC strip curtains · All loading bay services in Kent