- Location
- Yate, Gloucestershire
- Main postcode district
- BS37
- Nearby (straight line)
- Mangotsfield (5 miles), Kingswood (7 miles) and Keynsham (9 miles)
- Survey and quote
- Free, with a fixed written quote
A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
What should sites in Yate consider?
Measuring an opening in Yate for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time. Chilled rooms off a dock in Yate can lose temperature through internal doorways, and a low-temperature strip curtain is a quick, inexpensive fix.
Food and packaging businesses in Yate can choose strip grades suited to regular cleaning, helping to separate dispatch areas from production.
We keep the process simple for sites in Yate. A free survey tells us what the dock needs; a fixed written quote tells you what it will cost and what is included. We then organise the installation, with specialist engineers under our management and a programme agreed around your shifts. Night and weekend work is available by arrangement. Before we leave, the new equipment is tested, demonstrated and handed over with its documentation.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
Which strip width, thickness and grade should I choose?
Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.
- Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
- Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
- Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
- Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
- Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
- Specialist grades: anti-static, tinted or opaque, or welding grade for screening.
Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Headroom above the opening and which track type will suit it
- Clear opening width and height for each door
- Control positions, isolators and any existing interlocks
- Wind exposure at the dock, which affects door and shelter choice
- Temperature requirements for chilled, frozen or ambient goods
- Whether planning, building control or a building warrant may be needed
Options to discuss
Low-temperature strips
A grade formulated to stay flexible in chillers and freezers, where standard strips would stiffen, crack and stop falling back into place.
Ribbed strips
Strips with raised ribs that take the abrasion from forklifts and pallets, helping them stay clearer for longer at busy openings.
Planning, building control and safety law in England
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Yate. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about PVC strip curtains in Yate
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Yate, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can you work alongside our main contractor on a new build in Yate?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
What details do you need from us to quote for PVC strip curtains?
To get started, send the site address in Yate, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Can strips be replaced individually?
Yes, individual strips can be unhooked or unclamped and replaced without taking down the whole curtain. Keeping a few spare strips on site lets your team swap damaged ones as soon as they appear, which keeps visibility and sealing consistent across the opening.
Do strip curtains work at an external dock opening?
Yes, strip curtains are often hung just inside an external dock door to reduce draughts while the door is open for loading. They are not a substitute for the door itself, which still closes the opening for security and weather whenever the bay is not in use.
PVC strip curtains near Yate
Other towns within reach of Yate on our coverage list include Mangotsfield (5 miles), Kingswood (7 miles) and Keynsham (9 miles), all covered on the same terms.
Other loading bay services in Yate
Full guide to PVC strip curtains · Everything we do in Yate
Start your enquiry for Yate through the quote tool. A few photos and approximate sizes help us respond with something useful.