Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Shelters and seals · Yate

Inflatable dock shelters in Yate

Our approach to inflatable dock shelters in Yate matches the way we work across Gloucestershire: understand the dock first, agree the scope in writing, then manage the job through to a tested handover.

Guide £6,800–£12,800 per shelter ex VATFree site surveyBS37
Location
Yate, Gloucestershire
Main postcode district
BS37
Nearby (straight line)
Mangotsfield (5 miles), Kingswood (7 miles) and Keynsham (9 miles)
Survey and quote
Free, with a fixed written quote
Inflatable dock shelters, in short

An inflatable dock shelter is a dock shelter with air-filled fabric cushions at the top and sides of the opening, kept deflated and close to the building until a trailer has reversed in. A fan then inflates the cushions so they press against the trailer roof and sides, giving a close seal that adapts to different trailer widths and heights, and deflates again before the trailer leaves.

Is this right for your site in Yate?

Specifying a new temperature-controlled warehouse in Yate is the ideal time to design inflatable shelters in with the doors and levellers, so controls are integrated from the start. Mixed fleets arriving at a cold store in Yate, from rigids to double-deck trailers, are exactly the situation inflatable cushions are designed for.

Fresh produce cooled at a packhouse in Yate stays colder during loading when the gap around the trailer is sealed by inflated cushions.

Step one is a survey at your site in Yate, which costs nothing and carries no obligation. Step two is a written quote with a fixed price and a clear scope. Step three is installation, scheduled around your operation and carried out by specialist installation engineers working under our management, including evenings or weekends if agreed. Step four is handover, when the equipment is tested in front of you and the paperwork is passed over.

Inflatable shelter, curtain shelter or dock seal: which suits a cold chain dock?

For a cold chain dock that receives trailers of different sizes, an inflatable shelter usually gives the best balance of close sealing and flexibility. A dock seal can match it on a uniform fleet, while a curtain shelter is better suited to ambient bays.

  • Inflatable shelter: cushions adapt to each trailer's width and height and seal close to the body, with the full opening left clear.
  • Dock seal: a tight, lower-cost seal when every trailer is the same size, but it can leave gaps on other vehicles and the pads can intrude into the opening.
  • Curtain shelter: flexible and robust, but leaves small gaps that matter more at chilled and frozen docks.

Inflatables also stand clear of the trailer until it has docked, avoiding the rubbing that wears foam pads and curtains. The trade-off is the fan and controls, which need power and servicing. For frozen docks we specify the shelter alongside cold store dock doors so the two work together.

What safety rules affect inflatable dock shelters?

An inflatable shelter is powered dock equipment, so it must be suitable, maintained and correctly marked, and it should be controlled so a trailer cannot pull away with the cushions inflated around it.

  • Work equipment: PUWER 1998 in Great Britain and PUWER (Northern Ireland) 1999 require it to be maintained in a safe condition and inspected where deterioration could lead to danger.
  • Marking: in Great Britain powered dock equipment may carry the UKCA or the CE mark. For Northern Ireland, the CE mark or CE with UKNI applies.
  • Drive-away: HSE workplace transport guidance (HSG136), followed by HSENI in Northern Ireland, calls for safeguards against drivers driving away too early, such as traffic lights, vehicle or trailer restraints, or keeping keys until it is safe. Linking deflation to these controls protects both the cushions and the driver.
  • Regulator: HSE in Great Britain and HSENI in Northern Ireland.

A vehicle restraint interlocked with the shelter and door is a common way to make the whole sequence dependable.

Guide price, Yate
£6,800–£12,800 per shelter, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • Headroom above the opening and which track type will suit it
  • Age and condition of the equipment already in place
  • Bumper position and wear or damage on the dock face
  • Escape routes and pedestrian doors close to the bay
  • Wall and steel structure for door, shelter and bumper fixings
  • Clear opening width and height for each door

Options to discuss

Top cushion only

A single inflatable cushion across the top of the opening, paired with fixed side pads or curtains, for docks where trailer heights vary more than widths.

Interlocked controls

Controls linked to the door, leveller and restraint so the shelter inflates before the door opens and deflates only once it has closed.

Regulations and approvals in England

Workplace safety in England is regulated by HSE. For a loading bay in Yate, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about inflatable dock shelters in Yate

Is the site survey in Yate free?

Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.

Which building and safety rules apply to a site in Yate?

It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Yate, we check what applies at survey and design to it.

Can you work outside our normal operating hours in Yate?

Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.

Will we need to change the rest of the dock?

Usually not. Most inflatable shelters fit around an existing door opening, though the leveller, bumpers and door controls are reviewed so the cushions clear them and the interlocks work. Where the wall cannot carry the frame, a subframe is added. We confirm what is needed at survey.

Does an inflatable shelter work with containers and double-deck trailers?

Yes, provided the shelter is sized for the tallest and widest vehicles you receive. The cushions adapt to each vehicle's dimensions, which is a key reason inflatable shelters suit sites handling containers, standard trailers and double-deck units at the same bays.

Inflatable dock shelters near Yate

Other towns within reach of Yate on our coverage list include Mangotsfield (5 miles), Kingswood (7 miles) and Keynsham (9 miles), all covered on the same terms.

Other loading bay services in Yate

Full guide to inflatable dock shelters · Everything we do in Yate

Speak to us about your Yate loading bay. We will ask the right questions, then set out the next step clearly.

Call freeGet a quote