- Location
- Fareham, Hampshire
- Main postcode district
- PO16
- Nearby (straight line)
- Gosport (4 miles), Portsmouth (5 miles) and Hedge End (7 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
Is this right for your site in Fareham?
When you take on a unit in Fareham with no maintenance history, a baseline service report gives you a clear starting point for future planning. Distribution centres in Fareham running high trailer volumes commonly need twice-yearly servicing to keep springs, hydraulics and seals ahead of wear.
Servicing for dock equipment in Fareham is priced per item per visit and agreed in writing before the first engineer attends site.
Planned servicing and reactive repairs in Fareham are both chargeable. We agree the price of each visit in writing beforehand, and we never extend the scope without asking. Photos taken by your team help us plan the work and the parts. The engineer records the condition of doors, levellers, shelters and safety equipment as they go, and you receive that as a written report after the visit.
What happens on site during a service visit?
During a service visit the engineer works through the dock bay by bay, taking each item out of use only while it is being checked. Most of the dock keeps working throughout.
- Agree the order: the engineer meets the dock manager and agrees which bays are released when.
- Isolate: each item is isolated and locked off, and levellers are propped before anyone works underneath.
- Service and test: checks, adjustments and safety device tests are carried out.
- Hand back: each bay is returned to use once tested, with any unsafe item left out of use and reported straight away.
It helps if you can provide an equipment list with asset numbers, previous service and insurer reports, a contact on the day, and bays released as agreed. Out-of-hours visits can be arranged where daytime access is difficult, at a price agreed beforehand.
What happens to defects found during a service?
Defects found during a service are recorded in the written report, graded by priority and quoted as repairs before any work is done. You decide what is repaired and when.
- Unsafe: the item should not be used until repaired. The engineer tells you on the day and the item is left out of use.
- Repair soon: wear or damage that will get worse, such as a weeping hose or a fraying cable.
- Monitor: early wear to check again at the next visit.
Each repair is priced in writing, and parts can be ordered once you approve so the work can often be done on a planned return visit. Keeping service reports alongside insurer reports gives a clear maintenance record for audits, insurers and landlords.
Over time the reports also show which items keep failing, which helps when deciding whether to keep repairing equipment or budget for replacement.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What we look at around the bay
- Wiring, isolators and motor performance under load
- Anti-fall device on upward-opening doors
- Door panels, side seals and bottom rubbers
- Previous service and inspection records, where available
- Shelter curtains, frames and side pads for tears
- Door springs, cables and drums for wear or damage
Options to discuss
Lift table coordination
Servicing of scissor lift tables timed alongside the LOLER thorough examination regime set by your insurer or competent person, so defects are cleared before examination.
Multi-site schedule
One schedule, price list and report format across several sites or units, suited to landlords, managing agents, 3PLs and multi-site operators.
Which rules apply in England?
Lift tables and dock lifts in Fareham may fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted. It depends on the equipment and how it is used, and your insurer or competent person will confirm. Dock levellers are usually treated as work equipment under PUWER. We check what applies before any work starts.
Questions about loading bay servicing in Fareham
How often should equipment at our Fareham site be serviced?
It depends on how hard the equipment works and on the manufacturer's recommendations. A multi-shift dock with frequent trailer movements needs more attention than a door that opens a few times a day. We suggest a schedule after looking at the equipment and how it is used, and we can line visits up with your insurance inspections where that helps.
Can you repair all makes of loading bay equipment?
We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in Fareham. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.
Can you take over our existing loading bay maintenance arrangement?
Yes. Send us a list of the equipment at your Fareham site, with makes, models and approximate ages if known, plus recent service or inspection reports. We will propose a planned maintenance schedule and price it per item per visit. The first visit records the condition of everything, so you have a clear starting point for future servicing.
Can servicing be carried out outside operating hours?
Yes, servicing can be arranged for evenings or weekends where daytime access is difficult. Out-of-hours visits cost more, and that price is agreed in writing before the visit. Many sites prefer quieter periods so bays can be released without affecting trailer arrivals.
Are service visits chargeable?
Yes. Service visits are charged per item per visit, at a price agreed in writing before the first visit. Repairs found during a service are not included in that price; they are quoted separately and only carried out once you have approved them.
Loading bay servicing near Fareham
Distances are measured from Fareham. Nearby towns we cover include Gosport (4 miles), Portsmouth (5 miles) and Hedge End (7 miles), and other towns in the area are covered too.
Other loading bay services in Fareham
Full guide to loading bay servicing · Everything we do in Fareham
Start your enquiry for Fareham through the quote tool. A few photos and approximate sizes help us respond with something useful.