- Location
- Feltham, Greater London
- Main postcode district
- TW13
- Nearby (straight line)
- Ashford (2 miles), Hounslow (3 miles) and Sunbury-on-Thames (3 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
Is this right for your site in Feltham?
Distribution centres in Feltham running high trailer volumes commonly need twice-yearly servicing to keep springs, hydraulics and seals ahead of wear. Servicing for dock equipment in Feltham is priced per item per visit and agreed in writing before the first engineer attends site.
Ahead of an insurer inspection, sites near Feltham can line up a service visit so routine defects are dealt with before the inspector attends.
For loading bay servicing in Feltham, the visit is chargeable and priced up front. You will know the cost in writing before an engineer is booked. Photos of the problem, the make and model if known, and a description of what happens when the equipment is operated all help us prepare. If further work is needed, we quote it separately before doing it, and a written report closes every visit.
One feature of the freight network near Feltham is worth a mention: Heathrow's logistics and air-cargo cluster is close by. Busy or quiet, a dock needs equipment sized for the vehicles it receives.
How much does loading bay servicing cost?
Loading bay servicing typically costs £85 to £180 per item per visit, excluding VAT, where an item is one door, leveller, shelter, restraint or lift table. Simple items such as a dock seal sit towards the lower end; high-speed doors and lift tables sit towards the top.
How the price is agreed:
- You send a list of equipment, with photos or asset labels if you have them.
- We agree the price per item and the visit schedule in writing before the first visit.
- Repairs found during a service are quoted separately and only done once you approve them.
What moves the price:
- Equipment type: powered doors, levellers and lift tables take longer than seals and lights.
- Number of items: larger sites spread travel and set-up across more items.
- Frequency: the number of visits a year.
- Timing: out-of-hours visits cost more.
- Location: remote and island sites carry travel costs, shown in advance.
VAT is added at the standard rate.
What happens on site during a service visit?
During a service visit the engineer works through the dock bay by bay, taking each item out of use only while it is being checked. Most of the dock keeps working throughout.
- Agree the order: the engineer meets the dock manager and agrees which bays are released when.
- Isolate: each item is isolated and locked off, and levellers are propped before anyone works underneath.
- Service and test: checks, adjustments and safety device tests are carried out.
- Hand back: each bay is returned to use once tested, with any unsafe item left out of use and reported straight away.
It helps if you can provide an equipment list with asset numbers, previous service and insurer reports, a contact on the day, and bays released as agreed. Out-of-hours visits can be arranged where daytime access is difficult, at a price agreed beforehand.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Checks made while we are on site
- Anti-fall device on upward-opening doors
- Traffic light function and interlock operation
- Vehicle restraint engagement and its signal sequence
- Shelter curtains, frames and side pads for tears
- Door panels, side seals and bottom rubbers
- Dock bumpers for missing rubber or loose fixings
Options to discuss
Twice-yearly service
Two visits a year, common for busy docks, so wear on springs, hydraulics and shelter curtains is caught before it causes a breakdown at a busy time.
Multi-site schedule
One schedule, price list and report format across several sites or units, suited to landlords, managing agents, 3PLs and multi-site operators.
Regulations and approvals in England
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Feltham. Planning and Building Regulations questions are never assumed either way: we check what applies before any work starts, so you know before work is booked.
Questions about loading bay servicing in Feltham
Can you take over our existing loading bay maintenance arrangement?
Yes. Send us a list of the equipment at your Feltham site, with makes, models and approximate ages if known, plus recent service or inspection reports. We will propose a planned maintenance schedule and price it per item per visit. The first visit records the condition of everything, so you have a clear starting point for future servicing.
What information helps before a repair visit?
Photos or a short video of the fault are the most useful thing you can send, along with the make and model from the data plate, a description of what happens when the equipment is operated and any error codes. For a site in Feltham, also tell us about access, parking and site rules. With that, we can price the visit and bring the likely parts.
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Feltham site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
What is included in the service price?
The service price covers checking, adjusting and lubricating each item, testing its safety devices and a written report. Parts and repair work are not included; they are quoted separately so you can decide what to approve. Minor adjustments made during the visit are part of the service.
Can servicing be carried out outside operating hours?
Yes, servicing can be arranged for evenings or weekends where daytime access is difficult. Out-of-hours visits cost more, and that price is agreed in writing before the visit. Many sites prefer quieter periods so bays can be released without affecting trailer arrivals.
Loading bay servicing near Feltham
Sites close to Feltham get the same service, including those in Ashford (2 miles), Hounslow (3 miles) and Sunbury-on-Thames (3 miles), with every job run the same way.
Other loading bay services in Feltham
Full guide to loading bay servicing · Everything we do in Feltham
Get in touch about loading bay doors and dock equipment in Feltham: call, email or use the quote tool.