- Location
- Stockport, Greater Manchester
- Main postcode districts
- SK1 and SK3
- Nearby (straight line)
- Hyde (4 miles), Manchester (6 miles) and Ashton-under-Lyne (6 miles)
- Survey and quote
- Free, with a fixed written quote
A loading bay door automation package is an electric operator, control panel and set of safety devices fitted to an existing manual sectional door or roller shutter so it opens and closes at the press of a button. Once motorised, the door is a power-operated door, so it needs protection against trapping, such as a safety edge and photocells, and a way to be opened by hand if the power fails.
How does this suit sites in Stockport?
Operations in Stockport with manual sectional doors in good condition can often add an electric operator for much less than the cost of a new door. On older units in Stockport where the original doors are still sound, automation keeps the existing door working while removing the effort of hand chains.
Any automation project in Stockport begins with checking the door by hand, because a motor cannot make up for weak springs or worn rollers.
Our part of the job in Stockport is to survey, quote and manage; the fitting itself is done by specialist installation engineers working under our management. The survey and the written quote are free. Once the fixed price is accepted, we agree dates that work around your deliveries and shifts, including out-of-hours working where needed. Every installation is tested before handover, and you receive the documentation for each item fitted.
How much does it cost to motorise a loading bay door?
Automating an existing loading bay door typically costs £1,100 to £2,400 per door, excluding VAT, supply and fit. That covers the operator, control panel, safety devices, wiring at the door and commissioning.
What moves the price:
- Door type and weight: heavy shutters and large sectional doors need more powerful operators.
- Operator type: shaft-mounted, trolley, tubular or external chain-drive.
- Control mode: hold-to-run controls need fewer safety devices than impulse or automatic operation.
- Safety devices: safety edge, photocells and, for automatic closing, additional sensing.
- Extras: remote controls, pull cords, induction loops and interlocks with levellers or traffic lights.
- Power: whether a suitable isolated supply already exists near the door.
If the door needs work before it can be motorised, such as new springs or rollers, we price that separately so you can see each cost. The written quote after a free site survey is the fixed price.
What is involved in fitting a motor to an existing dock door?
Fitting a motor to an existing dock door usually takes a few hours to a day per door, and starts with checking that the door itself is safe to automate.
- The door is checked for balance, spring condition, cable wear and track alignment.
- The operator is mounted on the shaft, ceiling rail or barrel bracket.
- The control panel is fixed in a safe position with a clear view of the door.
- A safety edge is fitted to the bottom rail and photocells are set across the opening.
- Limits, forces and controls are set, then the door is tested against the relevant safety checks.
You will need to provide a suitable isolated power supply near the door, or ask us to include it, and keep the door out of use during the work. Single-phase supplies suit many operators, but larger industrial operators may need three-phase power, which we confirm at survey.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Access for deliveries, cranes or lifting equipment during installation
- How often each door cycles during a typical shift
- Scope to convert ground-level doors into docks or add lift tables
- Bumper position and wear or damage on the dock face
- Lighting inside trailers and at the dock face
- Control positions, isolators and any existing interlocks
Options to discuss
Dock interlocks
Wiring that links the door to levellers, shelters, restraints or traffic lights so the dock can only run in a safe sequence.
Tubular or external shutter motor
A motor inside the barrel for small and medium shutters, or a side-mounted chain-drive unit for large, heavy shutters at busy openings.
Which rules apply in England?
Sites in Stockport fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about loading bay door automation in Stockport
How do you price loading bay door automation for a site in Stockport?
Guide budgets for supply and fit are £1,100 to £2,400 per door, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Is VAT included in your guide prices for loading bay door automation?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Greater Manchester as everywhere else: for loading bay door automation, it is £1,100 to £2,400 per door, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Is the site survey in Stockport free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Do we need a three-phase supply?
Not always. Many operators for small and medium doors run on a single-phase supply, while larger industrial operators for heavy dock doors often need three-phase power. We confirm the supply your door needs at survey and can include any electrical work in the written quote.
How long does it take to automate a dock door?
Most automations are completed within a working day per door, once any repairs to the door itself have been done. Larger shutters, or doors that need a new power supply, can take longer. We plan the work so that only the door being automated is out of use.
Loading bay door automation near Stockport
If your site is not in Stockport itself, it may be near one of these: Hyde (4 miles), Manchester (6 miles) and Ashton-under-Lyne (6 miles). Pick the closest.
Other loading bay services in Stockport
Full guide to loading bay door automation · Everything we do in Stockport
Tell us what is happening at your Stockport dock, what equipment is there and when it is used, and we will suggest the right next step.