- Location
- Truro, Cornwall
- Main postcode district
- TR1
- Nearby (straight line)
- Falmouth (8 miles), Redruth (8 miles) and Newquay (10 miles)
- Survey and quote
- Free, with a fixed written quote
A loading bay conversion is a project that changes how a loading opening works, most often turning a ground-level door into a dock by lowering the approach, forming a leveller pit or adding a dock lift. It also covers upgrading older bays with new levellers, insulated doors, shelters and safety equipment while reusing the structure that is still sound.
Why do sites in Truro choose this?
Landlords in Truro upgrading vacant units to attract logistics tenants can add docks or modernise tired bays as part of wider refurbishment works. Ground conditions, drainage and buried services vary from site to site in Truro, which is why every conversion starts with a levels survey before any design.
Planning and building control questions for a conversion in Truro are checked during the survey, so the programme allows for any approvals that are needed.
If you are planning loading bay conversions for a site in Truro, expect four stages. A free survey and fixed written quote come first. We then agree a programme with you, including any out-of-hours work. Specialist installation engineers carry out the installation under our management, with us as your single point of contact. Finally, the equipment is tested, your staff are shown how it works and everything is handed over with its documentation.
How is downtime managed during a loading bay conversion?
Downtime during a conversion is managed by phasing the work bay by bay and agreeing a temporary loading arrangement before anything is broken out. A converted bay is out of use for the whole of its civils and installation period, so planning matters.
- Phasing: one bay or a pair of bays at a time, keeping enough doors open for your peak loads.
- Temporary loading: a neighbouring dock, a ground-level door or a mobile ramp used while the bay is closed.
- Curing time: new concrete needs time to gain strength before trailers and forklifts use it, and the programme allows for this.
- Security: openings are kept secure with temporary hoarding or the new door fitted early.
We ask you to provide site plans and any drawings of buried services, space for plant and spoil, a delivery area and a nominated contact. Our guide to upgrading loading bays without stopping the operation has more on phasing.
When is upgrading an old bay better than rebuilding it?
Upgrading is usually better when the pit, dock face and opening are sound and the right size for today's trailers, because the expensive structural work can be reused. Rebuilding makes sense when the structure itself is the problem.
Signs an upgrade will work:
- the pit is dry, uncracked and suits a modern hydraulic leveller of the length you need;
- the opening suits a modern insulated door and shelter;
- dock height suits most of the trailers you receive.
Signs a rebuild is needed:
- the pit is cracked, holds water or is too short for the trailer height range;
- the dock face is broken up from years of impact;
- the opening is too small for current trailers and loads.
The survey records the condition of each element, and the quote explains which parts are reused and which are replaced.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Yard gradient and the slope of the approach to the dock
- Access for deliveries, cranes or lifting equipment during installation
- Traffic routes for vehicles and separation of pedestrians
- Whether planning, building control or a building warrant may be needed
- Drainage on recessed or sloping dock approaches
- Control positions, isolators and any existing interlocks
Options to discuss
Recessed dock approach
The yard is lowered on a ramp so the trailer bed meets the building floor, with a leveller pit, retaining walls and drainage. Suited to high trailer volumes with yard depth.
Additional bays
New openings formed in an existing wall, with the structural alterations and approvals needed, to increase the number of docks a building can run.
Planning, building control and safety law in England
Lift tables and dock lifts in Truro may fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted. It depends on the equipment and how it is used, and your insurer or competent person will confirm. Dock levellers are usually treated as work equipment under PUWER. We check what applies at survey.
Questions about loading bay conversions in Truro
Do you cover Truro for loading bay conversions?
Yes. We take on loading bay conversions for businesses in Truro and across Cornwall. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
Is the site survey in Truro free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Truro, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can we keep working during a conversion?
Yes, in most cases. Conversions are phased bay by bay so the rest of the dock keeps running, and temporary loading is agreed before any bay is taken out of use. Openings are kept secure throughout, and noisy or disruptive work can be timed around your busiest periods.
Who carries out the groundworks for a conversion?
Groundworks are carried out by specialist contractors working under our management, so you have one point of contact for the whole conversion. The groundworks are designed around the equipment chosen, which avoids the mismatches that can happen when civils and dock equipment are bought separately.
Loading bay conversions and upgrades near Truro
The same survey, quote and repair service is available in towns around Truro, such as Falmouth (8 miles), Redruth (8 miles) and Newquay (10 miles).
Other loading bay services in Truro
Full guide to loading bay conversions · Everything we do in Truro
Request a quote for your loading bay in Truro, attaching photos of the dock, the equipment and any damage.