- Location
- Melton Mowbray, Leicestershire
- Main postcode district
- LE13
- Nearby (straight line)
- Oakham (9 miles), Mountsorrel (12 miles) and Loughborough (13 miles)
- Survey and quote
- Free, with a fixed written quote
An inflatable dock shelter is a dock shelter with air-filled fabric cushions at the top and sides of the opening, kept deflated and close to the building until a trailer has reversed in. A fan then inflates the cushions so they press against the trailer roof and sides, giving a close seal that adapts to different trailer widths and heights, and deflates again before the trailer leaves.
How does this suit sites in Melton Mowbray?
Operators replacing foam seals in Melton Mowbray that keep wearing out against ill-fitting trailers may find an inflatable shelter suffers far less rubbing. Fresh produce cooled at a packhouse in Melton Mowbray stays colder during loading when the gap around the trailer is sealed by inflated cushions.
Specifying a new temperature-controlled warehouse in Melton Mowbray is the ideal time to design inflatable shelters in with the doors and levellers, so controls are integrated from the start.
Any project involving inflatable dock shelters at a working site in Melton Mowbray takes planning. We survey free of charge, quote a fixed price in writing, and then agree a programme that keeps as much of the dock running as possible. Specialist installation engineers carry out the work under our management, out of hours if that suits you better. On completion we test each item, show your team how it operates and leave the documentation with you.
How much does an inflatable dock shelter cost?
An inflatable dock shelter typically costs £6,800 to £12,800 per shelter, excluding VAT, supply and fit. It costs more than a curtain shelter or foam seal because of its cushions, fan and controls, and the closer seal it gives.
Costs are driven mainly by:
- Size: door width and height, and the range of trailers to be sealed.
- Cushion layout: a top cushion only, or top and side cushions.
- Fan and controls: standalone push-button control or full integration with the door, leveller and restraint.
- Frame and covers: the steel frame and any protective outer curtains.
- Cold store features: insulated frames or heating where ice is a concern.
- Site work: wall fixings, power supply, powered access equipment and removal of an old shelter or seal.
We fix the price in the written quote after a free site survey, which also confirms whether your trailer range suits an inflatable shelter.
What is involved in installing an inflatable dock shelter?
Installing an inflatable shelter involves fixing a steel frame to the building around the dock door, mounting the cushions and fan, and wiring the controls, usually over one to two days per bay.
- The wall is checked and fixing points or a subframe prepared.
- The frame is fixed from powered access equipment in the yard.
- Top and side cushions are fitted, with protective covers where specified.
- The fan unit is mounted and the control panel wired, including interlocks to the door, leveller or restraint.
- Inflation, deflation and cushion retraction are tested with a trailer in the bay.
You will need to provide a clear yard area in front of the bay, take the bay out of use and arrange a power supply near the door, or ask us to include one. At cold stores we plan the work with the dock door kept closed, so the store stays at temperature while the shelter goes up outside.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Bumper position and wear or damage on the dock face
- Wall and steel structure for door, shelter and bumper fixings
- Escape routes and pedestrian doors close to the bay
- Asbestos register and any other site hazard information
- Wheel guide positions and yard markings for reversing vehicles
- Access for deliveries, cranes or lifting equipment during installation
Options to discuss
Protective outer covers
Hard-wearing covers over the cushions that shield the fabric from weather, sunlight and trailer contact, extending cushion life on exposed docks.
Top cushion only
A single inflatable cushion across the top of the opening, paired with fixed side pads or curtains, for docks where trailer heights vary more than widths.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Melton Mowbray. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about inflatable dock shelters in Melton Mowbray
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Melton Mowbray site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Is the site survey in Melton Mowbray free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Which building and safety rules apply to a site in Melton Mowbray?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Melton Mowbray, we check what applies at survey and design to it.
Do the cushions touch the trailer as it reverses in?
No, the cushions stay deflated and pulled back against the building while the trailer reverses in, so there is no rubbing as it docks. They inflate only once the trailer is in position and secured, which reduces wear on the fabric compared with foam seals and curtain shelters.
Is an inflatable shelter worth it at an ambient dock?
An inflatable shelter works at any dock, but at ambient bays a curtain shelter or dock seal usually gives enough sealing for less cost. Inflatables make most sense where temperature, hygiene or energy use makes the closest practical seal worth paying for.
Inflatable dock shelters near Melton Mowbray
Close neighbours of Melton Mowbray with their own pages here: Oakham (9 miles), Mountsorrel (12 miles) and Loughborough (13 miles). Choose one to see coverage details for that town.
Other loading bay services in Melton Mowbray
Full guide to inflatable dock shelters · Everything we do in Melton Mowbray
If a loading bay in Melton Mowbray needs attention, call us or send photos and details online.