Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Shelters and seals · Totton

Inflatable dock shelters in Totton

Enquiries about inflatable dock shelters from Totton go straight to our team, who will ask a few practical questions about the bay before arranging the next step with you.

Guide £6,800–£12,800 per shelter ex VATFree site surveySO40
Location
Totton, Hampshire
Main postcode district
SO40
Nearby (straight line)
Southampton (4 miles), Hythe (6 miles) and Eastleigh (7 miles)
Survey and quote
Free, with a fixed written quote
Inflatable dock shelters, in short

An inflatable dock shelter is a dock shelter with air-filled fabric cushions at the top and sides of the opening, kept deflated and close to the building until a trailer has reversed in. A fan then inflates the cushions so they press against the trailer roof and sides, giving a close seal that adapts to different trailer widths and heights, and deflates again before the trailer leaves.

What should sites in Totton consider?

Operators replacing foam seals in Totton that keep wearing out against ill-fitting trailers may find an inflatable shelter suffers far less rubbing. Fresh produce cooled at a packhouse in Totton stays colder during loading when the gap around the trailer is sealed by inflated cushions.

When a chilled dock in Totton sees condensation and ice around the door, the seal at the trailer is often where improvement starts.

We do not give a fixed price without seeing the site. A free survey in Totton lets us check the details that affect the job, and the written quote that follows is a fixed price for the agreed scope. We plan the work around your operation, arrange out-of-hours access if you need it and manage specialist installation engineers throughout. Handover includes testing, a demonstration and the paperwork you need for your records.

Inflatable shelter, curtain shelter or dock seal: which suits a cold chain dock?

For a cold chain dock that receives trailers of different sizes, an inflatable shelter usually gives the best balance of close sealing and flexibility. A dock seal can match it on a uniform fleet, while a curtain shelter is better suited to ambient bays.

  • Inflatable shelter: cushions adapt to each trailer's width and height and seal close to the body, with the full opening left clear.
  • Dock seal: a tight, lower-cost seal when every trailer is the same size, but it can leave gaps on other vehicles and the pads can intrude into the opening.
  • Curtain shelter: flexible and robust, but leaves small gaps that matter more at chilled and frozen docks.

Inflatables also stand clear of the trailer until it has docked, avoiding the rubbing that wears foam pads and curtains. The trade-off is the fan and controls, which need power and servicing. For frozen docks we specify the shelter alongside cold store dock doors so the two work together.

What is involved in installing an inflatable dock shelter?

Installing an inflatable shelter involves fixing a steel frame to the building around the dock door, mounting the cushions and fan, and wiring the controls, usually over one to two days per bay.

  1. The wall is checked and fixing points or a subframe prepared.
  2. The frame is fixed from powered access equipment in the yard.
  3. Top and side cushions are fitted, with protective covers where specified.
  4. The fan unit is mounted and the control panel wired, including interlocks to the door, leveller or restraint.
  5. Inflation, deflation and cushion retraction are tested with a trailer in the bay.

You will need to provide a clear yard area in front of the bay, take the bay out of use and arrange a power supply near the door, or ask us to include one. At cold stores we plan the work with the dock door kept closed, so the store stays at temperature while the shelter goes up outside.

Guide price, Totton
£6,800–£12,800 per shelter, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • How drivers are prevented from pulling away too early
  • Control positions, isolators and any existing interlocks
  • Condition of any existing leveller pit, kerb angles and pit drainage
  • Wall and steel structure for door, shelter and bumper fixings
  • Headroom above the opening and which track type will suit it
  • Asbestos register and any other site hazard information

Options to discuss

Protective outer covers

Hard-wearing covers over the cushions that shield the fabric from weather, sunlight and trailer contact, extending cushion life on exposed docks.

Interlocked controls

Controls linked to the door, leveller and restraint so the shelter inflates before the door opens and deflates only once it has closed.

Regulations and approvals in England

Workplace safety in England is regulated by HSE. For a loading bay in Totton, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about inflatable dock shelters in Totton

How do you price inflatable dock shelters for a site in Totton?

Guide budgets for supply and fit are £6,800 to £12,800 per shelter, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.

Will you deal with building control and planning for a project in Totton?

We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.

What details do you need from us to quote for inflatable dock shelters?

To get started, send the site address in Totton, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Can a punctured cushion be repaired?

Small punctures and tears can usually be patched, and a badly damaged cushion can be replaced on its own without changing the frame or fan. Repairs are carried out on a chargeable visit, with the price agreed before anyone attends.

Do the cushions touch the trailer as it reverses in?

No, the cushions stay deflated and pulled back against the building while the trailer reverses in, so there is no rubbing as it docks. They inflate only once the trailer is in position and secured, which reduces wear on the fabric compared with foam seals and curtain shelters.

Inflatable dock shelters near Totton

If your site is not in Totton itself, it may be near one of these: Southampton (4 miles), Hythe (6 miles) and Eastleigh (7 miles). Pick the closest.

Other loading bay services in Totton

Full guide to inflatable dock shelters · Everything we do in Totton

Start your enquiry for Totton through the quote tool. A few photos and approximate sizes help us respond with something useful.

Call freeGet a quote