- Location
- Long Eaton, Derbyshire
- Main postcode district
- NG10
- Nearby (straight line)
- Castle Donington (5 miles), Ilkeston (5 miles) and Nottingham (6 miles)
- Survey and quote
- Free, with a fixed written quote
An inflatable dock shelter is a dock shelter with air-filled fabric cushions at the top and sides of the opening, kept deflated and close to the building until a trailer has reversed in. A fan then inflates the cushions so they press against the trailer roof and sides, giving a close seal that adapts to different trailer widths and heights, and deflates again before the trailer leaves.
Why do sites in Long Eaton choose this?
Pharmaceutical distributors around Long Eaton working to tight temperature limits may want the close seal an inflatable shelter gives during every load. Driving rain and wind at an open bay in Long Eaton can wear cushion fabric, so a protective outer cover is worth considering on exposed docks.
Frozen food stores in Long Eaton loading trailers of varying sizes can use inflatable shelters to keep warm outside air away from the open door.
If you are planning inflatable dock shelters for a site in Long Eaton, expect four stages. A free survey and fixed written quote come first. We then agree a programme with you, including any out-of-hours work. Specialist installation engineers carry out the installation under our management, with us as your single point of contact. Finally, the equipment is tested, your staff are shown how it works and everything is handed over with its documentation.
What is involved in installing an inflatable dock shelter?
Installing an inflatable shelter involves fixing a steel frame to the building around the dock door, mounting the cushions and fan, and wiring the controls, usually over one to two days per bay.
- The wall is checked and fixing points or a subframe prepared.
- The frame is fixed from powered access equipment in the yard.
- Top and side cushions are fitted, with protective covers where specified.
- The fan unit is mounted and the control panel wired, including interlocks to the door, leveller or restraint.
- Inflation, deflation and cushion retraction are tested with a trailer in the bay.
You will need to provide a clear yard area in front of the bay, take the bay out of use and arrange a power supply near the door, or ask us to include one. At cold stores we plan the work with the dock door kept closed, so the store stays at temperature while the shelter goes up outside.
Inflatable shelter, curtain shelter or dock seal: which suits a cold chain dock?
For a cold chain dock that receives trailers of different sizes, an inflatable shelter usually gives the best balance of close sealing and flexibility. A dock seal can match it on a uniform fleet, while a curtain shelter is better suited to ambient bays.
- Inflatable shelter: cushions adapt to each trailer's width and height and seal close to the body, with the full opening left clear.
- Dock seal: a tight, lower-cost seal when every trailer is the same size, but it can leave gaps on other vehicles and the pads can intrude into the opening.
- Curtain shelter: flexible and robust, but leaves small gaps that matter more at chilled and frozen docks.
Inflatables also stand clear of the trailer until it has docked, avoiding the rubbing that wears foam pads and curtains. The trade-off is the fan and controls, which need power and servicing. For frozen docks we specify the shelter alongside cold store dock doors so the two work together.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Headroom above the opening and which track type will suit it
- Scope to convert ground-level doors into docks or add lift tables
- Clear opening width and height for each door
- Whether planning, building control or a building warrant may be needed
- Yard gradient and the slope of the approach to the dock
- Wheel guide positions and yard markings for reversing vehicles
Options to discuss
Top cushion only
A single inflatable cushion across the top of the opening, paired with fixed side pads or curtains, for docks where trailer heights vary more than widths.
Interlocked controls
Controls linked to the door, leveller and restraint so the shelter inflates before the door opens and deflates only once it has closed.
Regulations and approvals in England
Workplace safety in England is regulated by HSE. For a loading bay in Long Eaton, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about inflatable dock shelters in Long Eaton
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Long Eaton, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Is VAT included in your guide prices for inflatable dock shelters?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Derbyshire as everywhere else: for inflatable dock shelters, it is £6,800 to £12,800 per shelter, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Which building and safety rules apply to a site in Long Eaton?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Long Eaton, we check what applies at survey and design to it.
Can a punctured cushion be repaired?
Small punctures and tears can usually be patched, and a badly damaged cushion can be replaced on its own without changing the frame or fan. Repairs are carried out on a chargeable visit, with the price agreed before anyone attends.
Do the cushions touch the trailer as it reverses in?
No, the cushions stay deflated and pulled back against the building while the trailer reverses in, so there is no rubbing as it docks. They inflate only once the trailer is in position and secured, which reduces wear on the fabric compared with foam seals and curtain shelters.
Inflatable dock shelters near Long Eaton
The same survey, quote and repair service is available in towns around Long Eaton, such as Castle Donington (5 miles), Ilkeston (5 miles) and Nottingham (6 miles).
Other loading bay services in Long Eaton
Full guide to inflatable dock shelters · Everything we do in Long Eaton
Phone us to discuss your loading bay in Long Eaton, or start with the online quote tool if you prefer to send details first.